Affordable and clean energy for any rural community is crucial for the sustainable development of the community and the nation at large. The utilization of diesel-based power generation is one of the barriers to the sustainable development of these communities. Such generations require fuel that has a volatile market price and emits massive greenhouse gas emissions. This paper presents the design, modeling, and simulation of a hybrid power system for a rural area in the Sultanate of Oman that aims to reduce daily consumption of diesel fuel and greenhouse gas emissions. Hybrid Optimization of Multiple Energy Resources (HOMER) is utilized to model multiple energy mix hybrid systems and to propose the best optimal energy mix system for a selected community. In addition, Electrical Transient Analyzer Program (ETAP) software is employed to assess hybrid system operational performances, such as bus voltage profiles and active and reactive power losses. This study revealed that the PV−wind−di... [more]

Energy and environment form a nexus in which residents are the owners of tourism energy resources. Only a few studies have focused on the energy literacy of residents in ethnic tourism destinations and its impact on sustainable tourism. Using a qualitative research approach through field works and in-depth interviews in the Ping’an Village, Longji Terraces Scenic Area, this study explored the relationships between the energy literacy of residents and sustainable tourism in ethnic areas. The result showed that the energy literacy of the ethnic residents of Pingan village in terms of knowledge, attitude, and behavior has increased in line with the development of tourism, and both external and internal factors contribute to the improvement. Besides, the promotion of energy literacy among the residents not only has a positive impact on the tourists’ behavior but also brings about effective improvements in the local energy use structure and infrastructure, thus contributing to the sustainab... [more]

The pollutants emission into the atmosphere is largely related to human activity and health, whereas, of many factors, domestic heating systems greatly impact the emission rate. The measures taken to reduce the emission of harmful compounds to the atmosphere are slowly starting to bring the intended effects and a downward trend in emissions of such gases as carbon monoxide (CO), nitrogen oxides (NOx), and sulfur dioxide (SO2) is noticeable. The conducted tests allowed the determination of the combustion characteristics of individual pellet types available on the European market. During the tests, pellets were supplied to a 25 kW fixed-bed boiler with a constant mass flow of 3 kg·h−1, and the air-flow ratio was manipulated and presented in the form of the excess air coefficient λ (1.8−3.08). Pellets certificated with the ENPlus as A1 were found not meeting the requirements, mainly in the ash content, which negatively affected their combustion performance gradually and caused exceeded CO... [more]

A circular economy emerged as an alternative transition model, which is considered to be a solution to massive environmental degradation. The transition from a linear economy to a circular economy requires companies to be actively involved in more sustainable practices. For such a transition, companies must rethink, innovate on business models, and encourage sustainability-oriented innovation to deliver customer value, while simultaneously considering environmental and social aspects. On the other hand, the role of the circular economy in energy conservation and infrastructure has not been mapped out in the current literature. This systematic literature review seeks to map out the main interrelated topics of the circular economy and sustainability-oriented innovation, describing internal and external factors that need to be considered in the transition to a clean energy future. Key lines of research are identified, and suggestions for future research and for how to facilitate the movem... [more]

The vision system provides an important way for construction robots to obtain the type and spatial location information of the object. The characteristics of the construction environment, construction object, and robot structure are jointly examined in this paper to propose an approach of object segmentation by spraying the robot based on multi-layer perceptron. Firstly, the hand-eye system experimental platform is built through establishing the mathematical model of the system and calibrating the parameters of the model. Secondly, effort is made to carry out research on image preprocessing algorithms and related experiments, and compare the effects of different binocular stereo-matching algorithms in the actual engineering environment. Finally, research and an experiment are conducted to identify the applicability and effect of the depth image object segmentation algorithm based on multi-layer perceptron. The experimental results prove that the application of multi-layer perceptron to... [more]

Energy efficiency is extremely significant for industrial processes and technologies. Rising energy prices, depleting fossil fuels, as well as tightening regulations that impose the need to reduce GHG emissions incentivize companies to look for energy-efficient solutions. This also applies to wastewater treatment plants, which, on the one hand, are consumers of very large amounts of energy, and on the other hand, have significant potential to retrieve waste energy in the form of heat accumulated in wastewater. The authors of this publication have recognized the benefits of managing this heat. However, they have also pointed out several problems and difficulties associated with this process. By means of measured data, this publication provides a comprehensive analysis of the heat that can be recovered from wastewater treatment plants. As a result of the analyses, the locations of sites for collecting heat from wastewater have been determined, and potential technologies for this purpose... [more]

The energy sector is one of the most important pollutants in the atmosphere and causes significant emissions of greenhouse gases. In Russia, coal is the main contributor to the fossil fuel consumption of thermal power plants and boilers, thus affecting atmospheric air pollution by releasing particulate matter and nitrogen oxides, which are strongly associated with a negative impact on human health. This problem is especially acute for the resource regions of Yenisei, Siberia, a 2.5+ mln sq km macro-region in the very heart of Russia. In this paper, we analyze the impact of the structure of electricity and heat generation on emissions of pollutants and climate-active gases in Yenisei, Siberia, and give an overview of their social, ecological, and economic effects. More than 75% of electricity in Yenisei, Siberia, is produced by hydroelectric power plants that do not pollute the atmosphere. The rest of the electricity is generated in the cogeneration mode by thermal power plants, which a... [more]

Hydraulic fracturing utilizes pressurized liquid typically consisting of water, proppants, and a multitude of chemical additives, in order to fracture petroliferous strata to extract natural gas and oil. In this process, a vast amount of wastewater is produced. This water is heavily contaminated, which renders it unusable outside of direct reuse, without extensive treatment being performed. Typically, various sophisticated analytical techniques are involved in the characterization of both waste and treated waters, increasing the cost and the complexity of the management efforts. The article discusses the constituents found in oilfield wastewater, the methods used to identify and quantify these constituents, and the present management methods. Additionally, we introduce total organic carbon and conductivity analyses as surrogate measurements of overall water quality. Total organic carbon and conductivity are established bulk measurements, which can be used to facilitate rapid decisions... [more]

The study presents the research results on the rejected water generated in dewatering sludge stabilised in Autothermal Thermophilic Aerobic Digestion (ATAD) technology. The research was carried out in three municipal wastewater treatment plants (WWTPs), with a capacity of 1500 to 3260 m3 d−1 and a sludge node capacity of 835 to 2000 kg DM d−1. The mean content of Kjeldahl nitrogen (TKN) in the rejected water samples taken from each object ranged from 485 to 1573 mg N L−1, ammonium nitrogen 318 to 736 mg N L−1, and the average concentration of total phosphorus ranged from 96 to 281 mg P L−1. The average content of organic matter expressed as five-day biological oxygen demand (BOD5) ranged from 205 to 730 mg O2 L−1, while chemical oxygen demand (COD) ranged from 767 to 4884 mg O2 L−1. The study determined the kinetics of the biochemical decomposition of organic matter, assuming that it follows the first-order equation. The average reaction rate constant k in subsequent treatment plants w... [more]

Ceramic tile manufacturing is a highly energy-intensive process. Concerns about carbon emissions and energy costs make energy management crucial for this sector, which holds a leading role in Italian industry. The paper discusses the energetic and environmental performance of cogeneration (CHP) in the ceramic industry, where prime mover exhaust heat is supplied to a spray-dryer system, contributing to the satisfaction of the thermal demand and decreasing natural gas consumption. A thermodynamic model of a dryer unit, validated against real data, has been set-up to provide a detailed representation of the thermal fluxes involved in the process. Then, the thermal integration with two types of CHP prime movers of similar electric size (4 MW) is investigated. Energetic results show that the gas turbine can contribute up to 81% of dryer thermal consumption, whilst internal combustion engine contribution is limited to 26%. A methodology was ad-hoc defined for the environmental assessment of... [more]

University campuses represent a heterogeneous ecosystem as to social, economic, energetic, and personal travel planning with a huge impact on hosting cities and territories. Sustainable policies are thus fundamental to reduce this impact and to adopt ecological behaviors. The measures for any University Sustainability Plan should be evaluated in terms of GHG emissions, as well as the overall impact of the university itself. Carbon footprint (CF) calculation is a relevant Decision Support tool that allows university organizations to measure and communicate the environmental effects of their activities. The aim of this paper is to present a carbon footprint methodology specifically designed to calculate the carbon footprint of large universities. The methodology was applied to calculate the CF of the University of Bologna by following international standards—i.e., the GHG protocol, the ISO 14064, and the ISO/TR 14069 guide—to understand the environmental impact caused by greenhouse gas e... [more]

Current and future trends in the world population lead to the continuous growth of municipal waste volumes. Only in the EU-28 approx. 86 million tons of biowaste is produced yearly. On the other hand, the recent energy crisis calls for a fast transition towards more local and renewable energy sources. Most of this stream could be recycled through anaerobic digestion (AD) to produce energy and high-quality fertilizers. This paper presents a balance of dry anaerobic digestion of municipal biowaste based on three years of system monitoring in an industrial-scale AD plant. The results indicate that the average biogas production rate of 120 Nm3/ton of fresh waste can be achieved. Biogas utilization in combined heat and power (CHP) units leads to an overall positive energy balance at significantly reduced CO2 emissions. The overall CO2 emission reduction of 25.3−26.6% was achieved, considering that biogas utilization is environmentally neutral. Moreover, biowaste conversion allows digestate... [more]

The use of energy from waste can be a key means of reducing the consumption of fossil fuels and thus reduction of greenhouse gas emissions. Waste energy can be a worthy alternative to conventional energy sources in construction. This paper presents data on energy consumption for the preparation of domestic hot water in residential buildings. A review of the literature sources and inventions in the area of waste energy recovery from grey water was carried out. It also presents the results of research on prototypes of devices used to receive energy deposited in wastewater, published in recent years. The benefits of using drain water heat recovery systems for preheating utility water in residential buildings are presented. An analysis of technical solutions for grey water energy collection units was made, revealing their advantages and disadvantages. Great importance was attached to the review of patent sources as well as devices available on the market. According to the authors, the resu... [more]

Driven by the excessive consumption of fossil resources and environmental pollution concerns, a large amount of biorefinery research efforts have been made for converting lignocellulosic biomass into fuels and chemicals. Recently, a strategy termed “lignin-first,” which allows for realizing high-yield and high-selectivity aromatic monomers, is regarded as one of the best prospective strategies. This review summarizes recent research advances in lignin-first biorefinery, starting from the raw lignocellulose through lignin-first processing and moving to downstream processing pathways for intermediate compounds. In particular, for the core purpose of producing liquid fuels, the corresponding downstream processing strategies are discussed in detail. These are based on the structural properties of the intermediates derived from lignin-first biorefinery, including the catalytic conversion of lignin and its derivatives (aqueous phase system and pyrolysis system) and the cascade utilization of... [more]

Within the oil and gas industry, there is unanimity that wax deposits-driven pipeline blockages are a critical environmental concern and an economic liability of up to billions of dollars. However, a quantitative assessment of such an impact and, especially, of the different individual impacts that add up is absent from the current scientific literature. Such a gap is a deterrent for better-focused research. Given the production transition to heavy and paraffinic oils, harsh climatic zones, and extremely deep offshore oilfields, an extensive investigation is increasingly needed. The current endeavour was inspired by such a challenge and a review of the most recent technical and scientific publications was devised. A PRISMA-inspired and adapted methodology for systematic reviews was adopted. Over two hundred research articles, conference papers, books, theses, reviews, public databases and industry and government agencies reports were considered. As a result, a significant research gap... [more]

Sustainable energy strategies have been a critical subject for sustainable development, especially in cities. Citizens, as an integral part of the urban environment, play a significant role in urban spaces, as does their health. An accurate understanding of citizens’ mental, social, and physical health in urban settings is required to design and plan better cities. This study aims to assess the level of alignment with health factors in Mahabad, a major medium-sized city in Iran. Previous studies indicate that the built environment can influence health dimensions. Health factors depend to a great extent on how well the environment is formed and how it is put together. This research is a descriptive, analytical, cross-sectional study that analyzes the environment’s psychological elements and physical and mental health factors of Mahabad’s citizens. According to the Cochran model, 384 questionnaires were distributed among households. For data analysis, SPSS 12 and Arc GIS software were us... [more]

In recent years, there has been an increased focus on developing and utilizing renewable energy resources due to several factors, including environmental concerns, rising fuel costs, and the limited supply of conventional fossil fuels. The most appealing green energy conversion technology is solar energy, and its efficient application can help the world achieve Sustainable Development Goal 7: Access to affordable, clean energy. Irradiance, latitude, longitude, tilt angle, and orientation are a few variables that affect the functioning of a solar photovoltaic (PV) system. Additionally, environmental factors like dust accumulation and soiling of panel surfaces impact the cost of maintaining and producing electricity from a PV system. Dust characteristics (kind, size, shape, and meteorological elements), one of the largest factors affecting PV panel performance, need to be investigated to devise specific solutions for efficiently harnessing solar energy. The essential findings of ongoing... [more]

Hydrogen sulphide (H2S) and volatile methylsiloxanes (VMSs) are key pollutants from the point of view of the operators of biogas plants. H2S poses corrosive hazards, while VMSs transform into difficult-to-remove deposits, reducing the availability and yield of biogas combustion equipment. This study provides a critical overview and evaluation (so-called SWOT analysis) of implemented and promising methods to reduce the content of the above pollutants in biogas, with particular emphasis on biological techniques. The aim of the analyses was to develop an innovative concept for a hybrid biological method for the combined removal of H2S and VMSs using the same device, i.e., a two-phase biotrickling filter (BTF), in which the organic phase that intensifies the mass transfer of VMSs is in the form of a low-viscosity methyl silicone oil. The finally developed technological schematic diagram includes the basic devices and media streams. The concept is characterized by closed media circuits and... [more]

For operators of oil and gas to save the cost of unforeseen events and risks, and to avoid unnecessary shutdowns, there is a need to have an effective subsea pipeline integrity management system. Currently a large number of subsea pipelines around the globe have already exceeded their design lives; nevertheless, they are still being operated safely, effectively and with diligent consideration towards Environmental, Health and Safety regulations, as well as international standards and best practices. In addition, many older flowlines have no permanent pigging facilities due to various design and operational limitations. For the unpiggable pipeline, the vast majority of the oil and gas operators use different inspection and monitoring techniques to provide essential integrity management data such as product chemistry, cathodic protection, electrical resistance probes and coupons, etc. However, translating such essential integrity management data into meaningful information to make crucia... [more]

Anaerobic wastewater treatment is still a dynamically developing technology ensuring the effective degradation of organic compounds and biogas production. As evidenced in the large scale-up, this technological solution surpasses aerobic methods in many aspects. Its advantages stem from the feasibility of operation at a high organic load rate, the smaller production of difficult-to-manage sewage sludge, the smaller space and cubature required, and the high-methane biogas ultimately produced. The exploitation of anaerobic reactors is in line with the assumption of a circular economy, material recycling by reduced CO2 emissions and energy consumption, and the production of renewable energy. Despite their unquestionable advantages, there is still a need to seek novel approaches and improve the currently exploited installations. The key avenues of research entail improvements in the stability of bioreactor operations and the enhancement of bioreactor adaptability to changing and unfavorable... [more]

Microalgal biomass can be used to derive many different types of biofuels. In order to widely commercialize this technology, its limitations and weaknesses must be eliminated. Many technical and economic issues also need to be clarified and unknowns answered. Microalgae-based technologies have been shown to be versatile, efficient and suitable for practical and commercial use. However, the current technological readiness level (TRL) of most microalgae-based bioenergy production systems precludes their quick and widespread implementation. Their development is limited by a combination of factors that must be precisely identified, after which their negative impact on scale-up prospects can be eliminated or minimized. The present study identifies the main barriers to the development of industrial microalgae-production and microalgae-to-biofuel systems. In addition, it proposes measures and efforts necessary to achieve a higher TRL, which will provide investors with sought-after performance... [more]

Due to the increasing penetration of the power grid with renewable, distributed energy resources, new strategies for voltage stabilization in low voltage distribution grids must be developed. One approach to autonomous voltage control is to apply reinforcement learning (RL) for reactive power injection by converters. In this work, to implement a secure test environment including real hardware influences for such intelligent algorithms, a power hardware-in-the-loop (PHIL) approach is used to combine a virtually simulated grid with real hardware devices to emulate as realistic grid states as possible. The PHIL environment is validated through the identification of system limits and analysis of deviations to a software model of the test grid. Finally, an adaptive volt−var control algorithm using RL is implemented to control reactive power injection of a real converter within the test environment. Despite facing more difficult conditions in the hardware than in the software environment, th... [more]

Due to limited fossil fuel reserves, the global political situation, and progressive environmental pollution, the development of new methods of hydrogen production is highly demanded [...]

The service of mineral insulating oils for power transformer insulation and cooling aspects cannot be disavowed. However, the continued use of mineral oils is questionable due to environmental unfriendliness and the divestment from fossil fuels. This has provoked the quest for green alternative insulating liquids for high-voltage insulation. Natural esters are among the remaining alternatives that are renewable and environmentally friendly. Regardless of their environmental and technical merits, natural esters have some limitations that are slowing down their total acceptance by transformer owners and utilities. Critical limitations and concerns include esters’ pour point, viscosity, oxidative stability, and ionization resistance. In this work, the state of the art of “natural esters for transformers” is explored with the aim of potential improvements. The sections of the article are geared towards technical viewpoints on improving the overall workability and serviceability of natural... [more]

The utilization of end-of-life batteries (including Zn-C and alkaline batteries) is one of the areas that need to be perfected in order to provide environmental and human safety as well as to contribute to closing the material loop, as described in the EU Green Deal. The presented study shows the environmental impacts of the two selected pyrometallurgical technologies (processing of the black mass from waste Zn-C and alkaline batteries as an additive to an existing process of the recycling of steelmaking dust and treatment of the black mass as the primary waste material, both processes performed in a Waelz kiln). The presented LCA-based study of the recycling of end-of-life Zn-C and alkaline batteries focused on terrestrial ecotoxicity can be a useful tool in the process of the development of a circular economy in Europe, as it provides a multi-disciplinary overview of the most important environmental loads associated with the described recycling technologies. Therefore, the goal of th... [more]