The suitability of sewage-sludge derived washing agents (SS_WAs) (dissolved organic matter DOM; humic-like substances HLS; soluble humic substances SHS), was assessed for removing Cd from highly contaminated (300 mg/kg) sandy clay loam and clay. The soils were remediated via column flushing at two flow rates, 0.5 and 1.0 mL/min. The stability of the flow velocity (FV) depended on the type of SS_WA and decreased in the following order: DOM > HLS > SHS. Cd was most effectively removed during the first hours of flushing, and the process proceeded with a first-order kinetics. The overall process efficiency was higher at flow rate of 1.0 mL/min than at 0.5 mL/min and ranged from 65.7 (SHS) to 75.5% (DOM) for the sandy clay loam and from 64.7% (SHS) to 67.8% (DOM) for the clay. However, all SS_WAs at both flow rates removed the most mobile Cd fraction (F1) with an efficiency above 90%. Flushing improved soil characteristics in terms of the content of organic matter, humic substances and nutr... [more]

This article deals with options for how to express the luminous flux from outdoor electrical substations of the electric transmission system. Processing of the models of light emissions before and after refurbishment of lighting systems was motivated by setting out rules for the design and erection of refurbished lighting systems in outdoor electrical substations, which are most commonly built in inhabited rural areas with low luminance of the background. The proposed model and calculations are based on requirements of international standards and recommendations for lighting of outdoor workplaces as well as on internal regulations of the ČEPS (Czech Transmission System Operator). These requirements are implemented in real electrical substations and lighting models that are extended by the calculation space of the software goniophotometer. The software goniophotometer was used to evaluate light distribution characteristics of entire electric stations in various situations. This article... [more]

Quantifying the wider benefits of energy efficient building retrofits is crucial to incentivise householder retrofit investments. This research recognises the value of key performance indicators (KPIs) for assessing and demonstrating retrofitting benefits and provides an assessment of KPIs for evaluating retrofits. An integrated framework for evaluating retrofits using a set of economic, social, and environmental KPIs is proposed. This KPI framework is then applied in a pre- and post-retrofit assessment of five case study dwellings located in Ireland, revealing its usefulness in demonstrating the wider benefits of retrofitting to householders, with a view to driving retrofit investment. Three of these case study dwellings had state-of-the-art retrofit technologies installed as part of the works, including heat pumps and solar PV systems. In addition to demonstrating the wider benefits of retrofitting, the framework allowed for the identification of potential causes for differences in p... [more]

Mechanical systems (as belt conveyors) used in the mining industry, especially in deep underground mines, must be supervised on a regular basis. Unfortunately, they require high power and are spatially distributed over a large area. Till now, some elements of the conveyor (drive units) have been monitored 24 h/day using SCADA systems. The rest of the conveyor is inspected by maintenance staff. To minimize the presence of humans in harsh environments, we propose a mobile inspection platform based on autonomous UGV. It is equipped with various sensors, and in practice it is capable of collecting almost the same information as maintenance inspectors (RGB image, sound, gas sensor, etc.). Till now such experiments have been performed in the lab or in the mine, but the robot was controlled by the operator. In such a scenario the robot is able to record data, process them and detect, for example, an overheated idler. In this paper we will introduce the general concept of an automatic robot-ba... [more]

The unbridled use of fossil fuels is a serious problem that has become increasingly evident over the years. As such fuels contribute considerably to environmental pollution, there is a need to find new, sustainable sources of energy with low emissions of greenhouse gases. Climate change poses a substantial challenge for the scientific community. Thus, the use of renewable energy through technologies that offer maximum efficiency with minimal pollution and carbon emissions has become a major goal. Technology related to the use of hydrogen as a fuel is one of the most promising solutions for future systems of clean energy. The aim of the present review was to provide an overview of elements related to the potential use of hydrogen as an alternative energy source, considering its specific chemical and physical characteristics as well as prospects for an increase in the participation of hydrogen fuel in the world energy matrix.

The site where a peaceful underground nuclear explosion, Crystal, was detonated in 1974, at a depth of 98 m in perennially frozen Cambrian limestones, was studied by electrical resistivity tomography (ERT) in 2019. The purpose of our research, the results of which are presented in this article, was to assess the current permafrost state at the Crystal site and its surroundings by inversion and interpretation of electrical resistivity tomography (ERT) data. Inversion of the ERT data in Res2Dinv verified against ZondRes2D forward models yielded 2D inverted resistivity sections to a depth of 80 m. The ERT images revealed locally degrading permafrost at the Crystal site and its surroundings. The warming effect was caused by two main factors: (i) a damage zone of deformed rocks permeable to heat and fluids, with a radius of 160 m around the emplacement hole; (ii) the removal of natural land cover at the site in 2006. The artificial cover of rock from a nearby quarry, which was put up above... [more]

The process of consumption modernization can be expressed by adopting the principles of sustainable development within the sphere of consumption. It should be emphasized that the implementation of a sustainable consumption model becomes especially important when considering the fact that not only various types of enterprises but also consumers participate in the excessive consumption of natural resources. The processes of sustainable consumption that are related to its humanization and the formation of a responsible society are a response to the overconsumption of goods and services, which is not determined by actual human needs and does not consider social and ecological costs. The aim of the paper is to present a process of consumption modernization in Poland in the context of the functioning of the renewable energy market. Special attention is paid to behaviours that are consistent with the sustainable consumption model, as well as with the motives for using renewable energy sources... [more]

Existing studies of financing efficiency concentrate on capital structure and a single external environment or internal management characteristic. Few of the studies include the internal and external financing environments at the same time for hydrogen energy industry financing efficiency. This paper used the data envelopment analysis (DEA) model and the Malmquist index to measure the financing efficiency of 70 hydrogen energy listed enterprises in China from 2014 to 2020 from both static and dynamic perspectives. Then, a tobit model was constructed to explore the influence of external environment and internal factors on the financing efficiency. The contributions of this paper are studying the internal and external financing environments, and integrating financing cost efficiency and capital allocation efficiency into the financing efficiency of hydrogen energy enterprises. The results show that, firstly, the financing efficiency of China’s hydrogen energy listed enterprises showed an... [more]

The aim of the article is to examine technological innovations developed by engineers as part of Project-Based Learning at one of the Polish technical universities. We examined whether the innovations being developed meet the goals of sustainable development and whether they provide the basis for the introduction of sustainable business models. We analyzed reports from 49 projects implemented in the years 2018−2020 in which 146 scientists, 282 students of the Silesian University of Technology, and 126 experts from the university’s business environment were involved. We performed the analysis using content analysis and visualization techniques. The results show that the studied innovations implement the goals of sustainable development and most of them may become the basis of sustainable business models. The most frequently pursued goals are Industry, Innovation, and Infrastructure and Good Health and Well-Being. Most of the studied innovations can become the basis of the archetype of a... [more]

The target for 2030 of reaching a 32% share of renewable energy in the gross final energy consumption can be achieved by speeding up the transformation pending the implementation of knowledge transfer (KT) policies that foster regional cooperation for the cost-effective development of renewables. The research purpose is the analysis of important factors in the development of the renewable energy sector through knowledge sharing and collaboration across the Member States in a comparable manner. The hypotheses are as follows: Hypothesis 1 (H1) there are synergies between knowledge transfer and economic impact through income and jobs for the renewable energy sector and Hypothesis 2 (H2) the EU countries have different profiles of synergy. The research proposition was established through the employment of a quantitative synergy and trade-offs analysis based on the knowledge transfer indicators and the sustainable development framework. The research method, namely the advanced sustainabilit... [more]

The effects of urban transport are highly concerning. The rapid urbanization and motorization in smart cities have a huge impact on sustainability. The goal of the paper is to analyse the smart cities selected, in terms of the urban transport. This paper presents an overview of research works published between 1991 and 2020 concerning urban transport and MCDM (multi-criteria decision making). The author highlights the importance of decision-making criteria and their weight, as well as techniques. Seven criteria and forty-four objects were used as the input of the approach. The entropy weight method was used to compute the weight of each criterion. The TOPSIS (Technique for Order Performance by Similarity to Ideal Solution) was applied to calculate the assessment and ranking of transport performance for each smart city. Portland was found to be the best location for transport enterprises and projects; Tbilisi was ranked last. The values of the relative closeness coefficient ranged from... [more]

The Scheffler type concentrator is a curved metal reflector particularly suitable for solar thermal systems with a receiver fixed to the ground. Its operating principle is to deform the reflector throughout the year to optimize its performance in collecting sunlight. This study analyses the optical performance of a Scheffler reflector during the year. A CAD software tool is utilized to reproduce the mechanical deformations of a real Scheffler concentrator and the shape of the light spot on the receiver is analyzed by means of raytracing simulations. The starting configuration is the equinoctial paraboloid, which produces a point-like spot on the two equinox days only. On all other days of the year, this paraboloid is deformed in a suitable way in order to keep the spot as small as possible, but, even so, it is no longer a point-like spot. In the present work the simulated light distributions on the receiver, generated by the paraboloids (deformed or original), are compared. The results... [more]

Severe wellbore stability issues were reported while drilling in laminated formation with weak planes such as beddings. To accurately determine the safe mud weight according to the changing environment is of primary importance for safety control of drilling. Considering both the elastic and strength anisotropy of bedding formation, a novel theoretical model is established and the stress and failure around wellbores are analyzed. The accuracy and applicability of the theoretical model is verified by in situ field data. For the purpose of fulfilling real-time prediction, the method flowchart of programming is also provided. The results show that the model built can be conveniently used to predict the stress distribution, failure area, and collapse and fracture pressure while drilling, and rather good predictions can be made compared to real field data. In addition, the inhomogeneity of in situ stress and elastic parameters affect the upper limit of the safe mud weight window (SMWW) great... [more]

This article presents a solution that strengthens information security in critical infrastructure entities. Critical infrastructure plays a key role in the functioning of the state and the life of its citizens. Therefore, the protection of critical infrastructure is one of priorities in Poland. The aim of this article is to show that designated postal operators may become an important link in the process of information flow and cybersecurity. Based on their multiple-year experience and expended competences, the operators may provide digital services for entities responsible for the energy security infrastructure. Verification of this goal is necessary, since critical infrastructure is exposed to growing threats, both in the area of energy and other sensitive sectors of the economy. Research results presented in the article were obtained by conducting a CATI survey. The study used the purposeful selection method, which allows to influence the structure of a sample in the context of goal... [more]

Owing to the recent increase in the number of warning reports and alerts on the dangers of fine dusts, there has been an increasing concern over fine dusts among citizens. In spaces with poor ventilation, the occupants are forced to open the window to initiate natural ventilation via the direct introduction of the outside air; however, this may pose a serious challenge if the external fine-dust concentration is high. The lack of natural ventilation increases the indoor carbon dioxide (CO2) concentration, thus necessitating the installation of mechanical ventilation systems. This study analyzed the frequency of the application of mechanical ventilation systems in the Multi-purpose activity space of elementary schools, which are spaces where children require a higher indoor air quality than adults owing to the rapid increase in the CO2 concentration of the Multi-purpose activity space during activities. In addition, the architectural and equipment factors of the Multi-purpose activity sp... [more]

We examine the critical pore radius that results in critical gas saturation during pure methane hydrate dissociation within geologic porous media. Critical gas saturation is defined as the fraction of gas volume inside a pore system when the methane gas phase spans the system. Analytical solutions for the critical pore radii are obtained for two, simple pore systems consisting of either a single pore-body or a single pore-body connected with a number of pore-throats. Further, we obtain critical values for pore sizes above which the production of methane gas is possible. Results shown in the current study correspond to the case when the depression of the dissociation temperature (due to the presence of small-sized pores; namely, with a pore radius of less than 100 nm) is considered. The temperature shift due to confinement in porous media is estimated through the well-known Gibbs-Thompson equation. The particular results are of interest to geological media and particularly in the methan... [more]

Circular economy implementations tend to decrease the human pressure on the environment, but not all produce footprint reductions. That observation brings the need for tools for the evaluation of recycling processes. Based on the Exergy Footprint concept, the presented work formulates a procedure for its application to industrial chemical recycling processes. It illustrates its application in the example of cotton waste recycling. This includes the evaluation of the entire process chain of polyethylene synthesis by recycling cotton waste. The chemical recycling stages are identified and used to construct the entire flowsheet that eliminates the cotton waste and its footprints at the expense of additional exergy input. The exergy performance of the process is evaluated. The identified exergy assets and liabilities are 138 MJ/kg ethylene and 153 MJ/kg ethylene, reducing the Exergy Footprint by 75% and the greenhouse gas footprint by 43% compared to the linear pattern of polyethylene prod... [more]

Mountain huts are stand-alone micro-grid systems that are not connected to a power grid. However, they impact the environment by generating electricity and through day-to-day operations. The installed generator needs to be flexible to cover fluctuations in the energy demand. Replacing fossil fuels with renewable energy sources presents a challenge when it comes to balancing electricity generation and consumption. This paper presents an integration-and-optimization process for renewable energy sources in a mountain hut’s electricity generation system combined with a lifecycle assessment. A custom computational model was developed, validated with experimental data and integrated into a TRNSYS model. Five different electricity generation topologies were modelled to find the best configuration that matches the dynamics and meets the cumulative electricity demand. A lifecycle assessment methodology was used to evaluate the environmental impacts of all the topologies for one typical operatin... [more]

As a clean form of energy utilization, wind power is important for alleviating climate change. Although no direct carbon emissions occur in wind power generation, there exist upstream carbon emissions from manufacturing and installation, which have indirect effects on both the locations of wind farms and areas involved in upstream production and manufacturing. In this paper, based on Input−Output based Life Cycle Analysis (IO-LCA), we explored the lifetime carbon emissions of 378 wind farms in China that were still in operation in 2015. The regional distributions of carbon emissions from wind farms during the whole lifetime were depicted. The embodied carbon emission transfers from the location of the wind farm operation to upstream turbine manufacturing regions were traced. The net emission reduction benefits among regions were also calculated. Results show that carbon emissions mainly distribute in Liaoning, Inner Mongolia, and Tianjin in the turbine manufacturing stage, with a total... [more]

The Dongsha Island (DS) is located in the mid-northern South China Sea continental margin. The waters around it are underlain by the Chaoshan Depression, a relict Mesozoic sedimentary basin, blanketed by thin Cenozoic sediments but populated with numerous submarine hills with yet less-known nature. A large hill, H110, 300 m high, 10 km wide, appearing in the southeast to the Dongsha Island, is crossed by an ocean bottom seismic and multiple channel seismic surveying lines. The first arrival tomography, using ocean bottom seismic data, showed two obvious phenomena below it: (1) a low-velocity (3.3 to 4 km/s) zone, with size of 20 × 3 km2, centering at ~4.5 km depth and (2) an underlying high-velocity (5.5 to 6.3 km/s) zone of comparable size at ~7 km depth. MCS profiles show much-fragmented Cenozoic sequences, covering a wide chaotic reflection zone within the Mesozoic strata below hill H110. The low-velocity zone corresponds to the chaotic reflection zone and can be interpreted as of h... [more]

Due to the surge in load demand, the scarcity of fossil fuels, and increased concerns about global climate change, researchers have found distributed energy resources (DERs) to be alternatives to large conventional power generation. However, a drastic increase in the installation of distributed generation (DGs) increases the variability, volatility, and poor power quality issues in the microgrid (MG). To avoid prolonged outages in the distribution system, the implementation of energy management strategies (EMS) is necessary within the MG environment. The loads are allowed to participate in the energy management (EM) so as to reduce or shift their demands to non-peak hours such that the maximum peak in the system gets reduced. Therefore, this article addresses the complication of solutions, merits, and demerits that may be encountered in today’s power system and encompassed with demand response (DR) and its impacts in reducing the installation cost, the capital cost of DGs, and total el... [more]

The article presents the scope of issues related to the impact of the VUCA (volatility, uncertainty, complexity, ambiguity) environment on digital competences of management staff in power companies. Each company has to deal with its own individual and personalized VUCA world typical for the power industry. Unfortunately, some organizations are not aware of its existence, and therefore they do not identify the signals coming from the external environment while still working according to the developed patterns. The VUCA approach requires changing the competency model in enterprises and focusing on its strengths. On this basis, the research problem regarding power enterprises was formulated. The problem discussed in the article below concerns the undefined and undefined influence of the VUCA environment on the emerging digital competences of managers. In connection with the identification of the research problem in this area, an attempt was made to define the aim of the study, which is to... [more]

Inter-provincial power transmission in China solved the problem of electricity production and consumption spatial mismatch, which also facilitated Chinese green energy transition and sustainable development. Aiming to understand the spatial patterns and main driving factors, this paper accounted the aggregate carbon intensity per electricity produced by each province, built the inter-provincial Out−Destination matrixes of carbon emission embodied in power transmission among 27 provincial areas of 2006 and 2019, and quantitatively analyzed the change in spatial patterns of carbon flow and carbon intensity difference between power inward and outward provinces. We found that the inter-provincial power transmission has led to the reduction in the national average carbon intensity per electricity produced from 0.855 kg/kWh in 2006 to 0.628 kg/kWh in 2019 and the green energy transition of all provinces. The spatial morphology characteristics of carbon flow show the ‘three corridors of West-... [more]

The primary objective of this paper is to identify the possibilities of using sugar beet pulp as feedstock to produce a variety of added-value products. Such an application of the sugar production byproducts contributes to implementing circular bio-economy, which is a source of many economic, social, and environmental benefits. Specific objectives of this paper are: (1) Presenting the concept and meaning of circular bio-economy. (2) Characterizing properties of the sugar beet pulp from the perspective of using them as feedstock. (3) Determining the volume of production of the sugar beet pulp and the current methods of using them. (4) Determining the methods of obtaining attractive bioproducts and renewable energy from sugar beet pulp. Special attention was given to the amount of sugar beet pulp produced in Polish sugar refineries. Poland is among the European countries in which the volume of produced sugar is especially high. Therefore, the problem of appropriate waste management in th... [more]

Remote and hybrid working models and accelerated digitalization of the human resources processes were introduced in most organizations worldwide as a consequence of the COVD-19 pandemic. This digital revolution at the workplace was forced by extraordinary circumstances, thus its impact had not been anticipated before. This motivated the authors to study the new work reality. The research was based on a hypothesis that the digitalization of work and the human resources processes, approaches organizations to the sustainable development ideal. Sustainability is here understood as maintaining a balance between economic, environmental, and social factors. The authors analyzed the impact between the digital processes and the way of working on the following areas: CO2 emissions, creating plastic waste, saving energy, creating a gender-diverse and inclusive workplace. To verify the hypothesis, the authors used their own original and desk research. The original research was conducted within a B... [more]