Energy literacy is a concept which is not widely known by the public; however, it has captured the attention of several researchers in recent years. Concerning the assessment of energy and financial knowledge and people’s attitudes, intentions and behavior, it provides a global view of people’s knowledge, feelings, concerns and habits related to energy usage. Since energy is such an important resource in our daily lives, we can hardly imagine living without it. Moreover, considering that its production often requires the use of limited resources and leads to the worsening of already existing environmental problems, finding ways to alert consumers to the efficient management of their consumption is an urgent need. Therefore, in this article, we aimed to evaluate energy literacy levels, considering all the dimensions mentioned above, and search for the determinants of these levels. As an added novelty, we also aimed to determine the role of financial knowledge on energy literacy dimensio... [more]

Rural sanitation is still a challenge in developing countries, such as Brazil, where the majority population live with inadequate services, compromising public health and environmental safety. In this context, this study analyzed the demographic density of these rural agglomerations using secondary data from the Brazilian Institute of Geography and Statistics (IBGE). The goal was to identify the possibilities associated with using small-scale upflow anaerobic sludge blanket (UASB) reactors for sewage treatment, mainly focusing on biogas production and its conversion into energy for cooking, water heating and sludge sanitization. Results showed that most rural agglomerations lacking the appropriate sewage treatment were predominant from 500 to 1500 inhabitants in both northern and southern Brazilian regions. The thermal energy available in the biogas would be enough to sanitize the whole amount of sludge produced in the sewage treatment plants (STPs), producing biosolids for agricultura... [more]

Temperature has a significant effect on the photovoltaic module output power and mechanical properties. Measuring the temperature for such a stacked layers structure is impractical to be carried out, especially when we talk about a high number of modules in power plants. This paper introduces a novel thermal model to estimate the temperature of the embedded electronic junction in modules/cells as well as their front and back surface temperatures. The novelty of this paper can be realized through different aspects. First, the model includes a novel coefficient, which we define as the forced convection adjustment coefficient to imitate the module tilt angle effect on the forced convection heat transfer mechanism. Second, the new combination of effective sub-models found in literature producing a unique and reliable method for estimating the temperature of the PV modules/cells by incorporating the new coefficient. In addition, the paper presents a comprehensive review of the existing PV t... [more]

Hydraulic fracturing is a widely used technique for oil and gas extraction from ultra-low porosity and permeability shale reservoirs. During the hydraulic fracturing process, large amounts of water along with specific chemical additives are injected into the shale reservoirs, causing a series of reactions the influence the fluid composition and shale characteristics. This paper is focused on the investigation of the geochemical reactions between shale and fracturing fluid by conducting comparative experiments on different samples at different time scales. By tracking the temporal changes of fluid composition and shale characteristics, we identify the key geochemical reactions during the experiments. The preliminary results show that the dissolution of the relatively unstable minerals in shale, including feldspar, pyrite and carbonate minerals, occurred quickly. During the process of mineral dissolution, a large number of metal elements, such as U, Pb, Ba, Sr, etc., are released, which... [more]

The present paper deals with an original way to reduce the environmental damage caused to land and air resources by surface coal mines with external dumping, due to the transition to internal dumping with filling the worked out space of the surface mine with overburden. The basic principle of the proposed idea is the transition from the deepening longitudinal mining method for the development of inclined and steep coal seam strata to lateral ones. This article substantiates the choice of technology for a block-and-layer continuous lateral mining method, including the construction of a first-stage pit, the use of a combined transport and direct dumping technology for moving overburden to an internal dump when mining blocks using draglines. The advantage of the presented technology, along with filling the internal capacity of the surface mine field with overburden, is the possibility of leveling the relief within the boundaries of the pit allotment and the implementation of reclamation a... [more]

The decarbonisation goal stated in the Energy Performance of Buildings Directive (EPBD) regarding the building sector will be achieved only if the whole building life-cycle is considered. To fulfil this requirement, a benchmark based on the life cycle assessment (LCA) must be integrated into the early planning phase of buildings by designers. The estimation of such indicators requires the development of a database of building assessments. In this study, an LCA of 11 office buildings in Poland was used to set average values that can be used as a benchmark. The LCA methodology based on the Building Research Establishment Environmental Assessment Method (BREEAM) certification was used. The analysis did not concentrate on one type of office building. The main objective was to investigate a possible range of total Global Warming Potential (GWP) index values normalized to the usable unit floor area. The importance of the GWP of individual life-cycle phases was also considered. The study show... [more]

The methods of task assignment and path planning have been reported by many researchers, but they are mainly focused on environments with prior information. In unknown dynamic environments, in which the real-time acquisition of the location information of obstacles is required, an integrated multi-robot dynamic task assignment and cooperative search method is proposed by combining an improved self-organizing map (SOM) neural network and the adaptive dynamic window approach (DWA). To avoid the robot oscillation and hovering issue that occurs with the SOM-based algorithm, an SOM neural network with a locking mechanism is developed to better realize task assignment. Then, in order to solve the obstacle avoidance problem and the speed jump problem, the weights of the winner of the SOM are updated by using an adaptive DWA. In addition, the proposed method can search dynamic multi-target in unknown dynamic environment, it can reassign tasks and re-plan searching paths in real time when the l... [more]

A hydrobiotite (HBT) clay contains more cesium (Cs)-specific adsorption sites than illitic clay, and the capacity of frayed edge sites can increase as the weathering of micaceous minerals proceeds. Thus, Cs can be selectively adsorbed to HBT clay. In this study, we investigated the removal efficiency of non-radioactive (133Cs) and radioactive (137Cs) Cs from HBT, using oxalic acid. We found the minimum optimal concentration of 0.15 M oxalic acid removed more than 90% of Cs. Subsequently, cations and Cs ions were removed using Ca(OH)2 and sodium tetraphenylborate (NaTPB) to treat the washing wastewater generated at the optimum concentration of the desorbent (0.15 M oxalic acid). In order to remove cations and heavy metal ions in the waste solution, Ca(OH)2 was treated at a mass ratio of 0.025 g/mL and pH 9−10 to derive optimal conditions. As a final step, to remove Cs, NaTPB was treated with a mass ratio of 2 mg/mL and reduced to below 0.1 mg/L Cs to find the optimal dose. The novelty o... [more]

The objective of this research was to evaluate the stress corrosion cracking (SCC) of X-70 micro-alloyed steel in contact with bio-ethanol and E-50 gasohol. Environmental factors, including water (1%, 3% and 5%) and NaCl (10 mg/L and 32 mg/L), as well as two aging treatments were studied. Experimental values were obtained by the Slow Strain Rate Test (SSRT) technique, X-ray fluorescence (XRF), and tensile test according to the information reported in the literature. The results of the SSRT for the SCC determination showed that this steel in these conditions did not show evidence of SCC, which was attributed to the formation of an oxide (Fe2O3) not soluble in ethanol. The oxide layer acts as a protector preventing the formation of pitting, one of the main causes of cracks initiation in SCC.

This paper assesses the application of the second-law of thermodynamics in a military Environmental Control Unit (ECU) to evaluate the exergy destruction (or irreversibility) in each component when operating at high ambient temperature. Experimental testings were conducted on three ECUs, 1.5 (5.3 kW), 3 (10.6 kW), and 5 (17.6 kW) tons of refrigeration (RT), to assess the potential contribution of each component to enhance the overall energy efficiency of the system, and to determine the feasibility of the thermodynamic model presented herein. The analysis provided for extreme high ambient conditions up to 51.7 °C (125 °F). The results yielded that the highest irreversibility was associated with compressors (32.4% to 42.5%). This is followed by the heat exchanges (19.6% to 32.9%) in the case of 1.5-RT and 3-RT units, whereas for the 5-RT unit, the highest irreversibility was associated with the evaporator followed by the one of the compressors. In the 3-RT ECU, the condenser’s second-la... [more]

The life cycle assessment of components is becoming increasingly important for planning and construction. In this paper, a novel storage technology for excess electricity consisting of a heat pump, a heat storage and an organic rankine cycle is investigated with regards to its environmental impact. Waste heat is exergetically upgraded, stored in a hot water storage unit and afterwards reconverted to electricity when needed. Such a pilot plant on a lab scale is currently built in Germany. The first part of this paper focuses on geothermal energy as a potential heat source for the storage system and its environmental impact. For a large scale application, geothermal hotspots in Germany are further investigated. The second part analyzes the storage technology itself and compares it to the impacts of commonly used battery storage technologies. Especially during the manufacturing process, significantly better global warming potential values are shown compared to lithium-ion and lead batteri... [more]

The production of palm oil biodiesel in Indonesia has the potential to negatively impact the environment if not managed properly. Therefore, we conducted a life cycle assessment (LCA) study on the production of palm oil biodiesel to assess the environmental performance in Indonesia. Using an LCA approach, we analyzed the environmental indicators, including the carbon footprint, as well as the harm to human health, ecosystem diversity, and resource availability in palm oil biodiesel production. The functional unit in this study was 1 ton of biodiesel. The life cycle of palm oil biodiesel production consists of three processing units, namely the oil palm plantation, palm oil production, and biodiesel production. The processing unit with the greatest impact on the environment was found to be the oil palm plantation. The environmental benefits, namely the use of phosphate, contributed 62.30% of the 73.40% environmental benefit of the CO2 uptake from the oil palm plantation processing unit.... [more]

Ventilation, heating and air conditioning systems are the main energy consumers in building sector. Improving the energy consumption of these systems, while satisfying the occupants’ comfort, is the major concern of control and automation designers and researchers. Model predictive control (MPC) methods have been widely studied in order to reduce the energy usage while enhancing the occupants’ comfort. In this paper, a generalized predictive control (GPC) algorithm based on controlled auto-regressive integrated moving average is investigated for standalone ventilation systems’ control. A building’s ventilation system is first modeled together with the GPC and MPC controllers. Simulations have been conducted for validation purposes and are structured into two main parts. In the first part, we compare the MPC with two traditional controllers, while the second part is dedicated to the comparison of the MPC against the GPC controller. Simulation results show the effectiveness of the GPC in... [more]

Building sectors account for major energy use and greenhouse gas emissions in the US. While urban building energy-use modeling has been widely applied in many studies, limited studies have been conducted for Manhattan, New York City (NYC). Since the release of the new “80-by-50” law, the NYC government has committed to reducing carbon emissions by 80% by 2050; indeed, the government is facing a big challenge for reducing the energy use and carbon emissions. Therefore, understanding the building energy use of NYC with a high spatial and temporal resolution is essential for the government and local citizens in managing building energy use. This study quantified the building energy use of Manhattan in NYC with consideration of the local microclimate by integrating two popular modeling platforms, the Urban Weather Generator (UWG) and Urban Building Energy Modeling (UBEM). The research results suggest that (1) the largest building energy use is in central Manhattan, which is composed of lar... [more]

The effect of electrostatic fields on the bioelectrochemical removal of ammonium and nitrite from nitrogen-rich wastewater was investigated at strengths ranging from 0.2 to 0.67 V/cm in bioelectrochemical anaerobic batch reactors. The electrostatic field enriched the bulk solution with electroactive bacteria, including ammonium oxidizing exoelectrogens (AOE) and denitritating electrotrophs (DNE). The electroactive bacteria removed ammonium and nitrite simultaneously with alkalinity consumption through biological direct interspecies electron transfer (DIET) in the bulk solution. However, the total nitrogen (ammonium and nitrite) removal rate increased from 106.1 to 166.3 mg N/g volatile suspended solids (VSS).d as the electrostatic field strength increased from 0.2 to 0.67 V/cm. In the cyclic voltammogram, the redox peaks corresponding to the activities of AOE and DNE increased as the strength of the electrostatic field increased. Based on the microbial taxonomic profiling, the dominant... [more]

The Moon’s environmental conditions present limited opportunities for waste heat dissipation, so internal heat gains (IHG) are a key component of thermal balance in a lunar building. Despite the significant development in energy saving and energy storage technologies of the last thirty years, the issue of IHG in lunar buildings has not been readdressed since the early 1990s. This study is based on an inspection of internal heat sources conducted aboard LUNARES, the first European extraterrestrial analogue habitat. The equipment absent on LUNARES, but indispensable for an actual lunar base, was identified and accounted for, along with additional laboratory and maintenance equipment. Three main groups of internal heat sources were identified and studied in detail. Waste heat generated by electric devices was accounted for, along with occupational heat loads adjusted for lunar partial gravity conditions. Assuming a photovoltaic power source for the studied building, two alternative energy... [more]

Unsustainable consumption of biofuels contributes to deforestation and climate change, while household air pollution from burning solid biofuels in homes results in millions of premature deaths globally every year. Honduras, like many low and medium Human Development Index countries, depends on primary solid biofuels for more than 30% of its primary energy supply (as of 2013). We conducted a societal exergy analysis and developed a forest stock model for Honduras for 1971−2013 and used the results to model an energy transition from traditional wood stoves to either improved efficiency wood cookstoves or modern fuel cookstoves (using Electricity or Liquefied petroleum gas) over the period 2013−2050. The exergy analysis and forest model enabled quantification of the environmental tradeoffs between the improved efficiency and fuel switching scenarios. We find that the continued reliance on wood within both the existing and improved wood cookstove scenarios would exhaust forest stocks by 2... [more]

Texas has experienced a rapid development of wind power over the last 20 years. Since wind power was developed mostly in desolate areas that are remote from urban centers due to its nature conditions, Texas implemented the Competitive Renewable Energy Zones (CREZ) project, the goal of which is to integrate the wind supply regions with the large demand centers. The objectives of this paper are two-fold. The first is to investigate the impact of the CREZ project on market price convergence. Specifically, this paper analyzes the extent that the transmission project affected wholesale price level, variance, and difference between the regions. The second is to measure environmental benefits obtained from displacement of fossil fuel generators by wind power. The results provide a strong evidence for price convergence across the ERCOT market following the completion of the CREZ project. As well as price convergence, wholesale price level and variance are also reduced significantly. Specifical... [more]

Perennial cropping systems, such as almond orchards and vineyards, increasingly dominate California’s agricultural landscape. In California’s leading agricultural region, the Central Valley, woody perennials comprise about half of total farmland. Woody perennial orchards produce high value food crops such as almonds, but also generate significant woody biomass which, where feasible, is used to generate biomass-derived electricity. Because of its semi-arid climate, California agriculture is heavily dependent on irrigation, which in some regions, requires energy-intensive pumping processes for both surface and groundwater. This research study explores the tradeoffs in economic, energy and water efficiency, considering the response of almond orchards to water application rates, using a life cycle basis for calculations and considering water scarcity, to reveal one part of the food-energy-water nexus. Findings indicate economic efficiency, represented by business-as-usual practices by grow... [more]

Microalgae have been extensively tested for their ability to create bio-based fuels. Microalgae have also been explored as an alternative wastewater treatment solution due to their significant uptake of nitrogen and phosphorus, as well as their ability to grow in different water types. Recently, there has been significant interest in combining these two characteristics to create economic and environmentally friendly biofuel using wastewater. This study examined the growth and lipid production of the microalgae Porphyridium (P.) cruentum grown in swine wastewater (ultra-filtered and raw) as compared with control media (L−1, modified f/2) at two different salt concentrations (seawater and saltwater). The cultivation of P. cruentum in the treated swine wastewater media (seawater = 5.18 ± 2.3 mgL−1day−1, saltwater = 3.32 ± 1.93 mgL−1day−1) resulted in a statistically similar biomass productivity compared to the control medium (seawater = 2.61 ± 2.47 mgL−1day−1, saltwater = 6.53 ± 0.81 mgL−... [more]

Water-based polymer drilling fluids are commonly used for drilling long horizontal wells where eliminating the drilling fluid-related formation damage and minimizing the environmental impact of the drilling fluids are the main concerns. An experimental study was conducted to investigate the turbulent flow of a polymer fluid over a stationary sand bed deposited in a horizontal pipeline. The main objectives of the study were to determine the effects of sand particle size on the critical velocity required for the onset of the bed erosion and the near-wall turbulence characteristics of the polymer fluid flow over the sand bed. Industrial sand particles having three different size ranges (20/40, 30/50, 40/70) were used for the experiments. The particle image velocimetry (PIV) technique was used to determine instantaneous local velocity distributions and near-wall turbulence characteristics (such as Reynolds stress, axial and turbulence intensity profiles) of the polymer fluid flow over the... [more]

Sustainable solutions are needed to manage increased energy demand and waste generation. Renewable energy production from abundant sewage sludge (SS) and digestate (D) from biogas is feasible. Concerns about feedstock contamination (heavy metals, pharmaceuticals, antibiotics, and antibiotic-resistant bacteria) in SS and D limits the use (e.g., agricultural) of these carbon-rich resources. Low temperature thermal conversion that results in carbonized solid fuel (CSF) has been proposed as sustainable waste utilization. The aim of the research was to investigate the feasibility of CSF production from SS and D via torrefaction. The CSF was produced at 200~300 °C (interval of 20 °C) for 20~60 min (interval 20 min). The torrefaction kinetics and CSF fuel properties were determined. Next, the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) of SS and D torrefaction were used to build models of energy demand for torrefaction. Finally, the evaluation of the energy ba... [more]

The proliferation of residential building energy consumption and CO2 emissions has led many countries to develop buildings under the green rating systems umbrella. Many such buildings, however, fail to meet their designed energy performance, which is possibly attributable to occupant behaviour and unforeseen building usages. The research problem lies in the fact that occupant environmental behaviour is a complex socio-cultural-technical issue that needs to be addressed to achieve the desired energy savings. This study is novel as it investigates complex interrelationships between many observed and unobserved variables using data from four LEED-certified multi-residential buildings in the United Arab Emirates. Structural Equation Modelling was used to analyse the impact of three unobserved/latent variables: occupant environmental Attitude, Knowledge and Behaviour (AKB) with respect to occupant energy consumption, based on measured/observed variables. Although our Goodness-of-Fit values... [more]

Energy-efficient buildings, sustainable buildings, smart buildings, nearly zero-energy buildings, passive and active buildings are construction concepts widely recognised as setting the latest trends. The purpose of their design is to create an optimal thermal microclimate by means of heat flows that are either formed within it or enter into it. This research paper presents an analysis of the measurements of the density of heat flows, their spread in building constructions, all of which is examined in laboratory conditions and confronted with calculation models. The hypothesis of this research is to confirm or refute whether the computational models match the laboratory simulations in terms of thermal-technical parameters. The research uses a methodology designed for examining building constructions under virtually stable conditions. Two variants of external sandwich walls based on prefab cross laminated timber panels (variant A) and structural insulated panel (variant B) were proposed... [more]

When planning the energy demand of ventilation, proper consideration should be given to the possible scenarios of indoor air quality and pollutant concentrations. The purpose of the present research is to create a practical method of prioritising indoor air pollutants, considering technical, economical and health aspects, in the Indoor Air Quality model (IAQ). In order to find the global weights for the combined IAQindex model sub-elements (in practice, air pollutant concentrations), the Multi-Criteria Decision Making (MCDM) approach is used. The authors have approached the problem of a weighting scheme in a model such as the complex model of the IAQ related to making decisions with many criteria and with the Multi-Attribute Decision Making MADM approach (specifically MCDM). The basis of the MADM method is a decision matrix constructed rationally by the authors, which includes six attributes: actual indoor air carbon dioxide concentration, total volatile organic compounds (TVOCs) and f... [more]