Various techniques are implemented to reduce odor emission due to their potential multi-source nature. One modern approach is the use of thermochemically processed biomass to eliminate odors. Compared with raw biomass, processed biomass is characterized by greater porosity and an expanded specific surface. In these laboratory experiments, adsorption tests for a mixture of indole, 2,3-dimethylpyrazine, and 2,3,5-trimethylpyrazine are carried out using torreficates produced from biomass from the agri-food industry (walnut shells, orange peels, peach stones, and apple wood chips). This research is focused on the determination of the correlation between the physical-hydraulic properties of the torreficates and their ability to reduce the odors simulated by the selected compounds. The results indicate that 2,3-dimethylpyrazine and 2,3,5-trimethylpyrazine are not detected in any of the investigated low-temperature biochars. However, indole is detected in most materials, and its most signific... [more]

Growing demand for renewables and sustainable energy production contributes to a growing interest in producing high quality biomethane from biogas. Despite having methane (CH4) as its main component, biogas may also present other noncombustible substances in its composition, i.e., carbon dioxide (CO2), nitrogen (N2) and hydrogen sulfide (H2S). Contaminant gases, such as CO2 and H2S, are impurities known for being the main causes for the decrease of biogas calorific value and corrosion, wear of pipes, and engines, among others. Thus, it is necessary to remove these compounds from the biogas before it can be used in applications such as electricity production, thermal purposes, and replacement of conventional fossil fuels in vehicles, as well as injection into natural gas distribution networks. In this context, the present work aimed to present a systematic review of the literature using the multicriteria Methodi Ordinatio methodology and to describe processes and materials for H2S remov... [more]

The topical challenge for the Polish, European, and global fertilizer industry is to produce sufficient nutrients for growing plants using more energy-efficient and environmentally friendly methods. The appropriate course of action, in terms of the challenges posed, could be the production of liquid fertilizers, made from waste materials that exhibit fertilizer properties. This solution makes it possible not only to reduce the exploitation of natural resources but above all, to implement elements of a circular economy and reduce the energy intensity of the fertilizer industry. This study shows that both in Poland and the European Union, there are current regulations aimed at elements of a circular economy and indicating the need to obtain fertilizers containing valuable plant nutrients from organic waste or recycled materials. The recognition carried out for the Polish market clearly indicates that to produce liquid organic fertilizers and soil conditioners, the most used is the digest... [more]

Butyl lactate is a green solvent produced from renewable materials through the reaction of ammonium lactate with n-butanol. It could be a source material for valuable products such as propylene glycol, acrylic acid, its derivatives, and the cyclic monomer of polylactic acid (PLA)—lactate. In this study, we present novel non-catalytic interactions of ammonium lactate and n-butanol carried out in the temperature range of 130−170 °C in a closed system. The study focused on the kinetic modelling of the reaction between ammonium lactate and n-butanol to derive a mathematical model for the reactor unit of butyl lactate synthesis. The aim of this work was to study the kinetics of the interaction between ammonium lactate and n-butanol, as well as to obtain a kinetic model of the process and its parameters. We suggested the chemical transformation routes and determined the kinetic model and parameters that adequately describe the process in a closed system within the studied condition range. Th... [more]

Conventional reservoir drill-in fluids used for drilling reservoirs in Weizhou Oilfield encounter rheological problems that result in technical problems such as hole-cleaning in openhole horizontal intervals. Hence, novel drill-in fluid was developed by optimizing the additive quantity and particle size distribution. Lab tests showed that novel drill-in fluids boast high low shearing rate viscosity, and provide promising cutting, carrying, and suspension capabilities. Furthermore, the novel drill-in fluids performed well in reservoir protection, with a permeability recovery rate of more than 90%. The novel drill-in fluids also have high inhibition capabilities with a linear expansion rate of mud shale as low as 10%, with a rolling recovery rate of up to 96.48%. Field application results showed no pipe-stuck was encountered during tripping in the horizontal interval when using the novel drill-in fluid. Moreover, by using the novel drill-in fluids, skin factor was reduced from 20.0 to −3... [more]

The development of low-carbon technologies that will facilitate the efficient use of hydrogen (H2) as an energy carrier is a critical requirement of contemporary society. To this end, it is anticipated that the cost of H2 production will become a key factor in tandem with production efficiency, process safety, and transport. Much effort has been made to create and develop new, reversible, and sustainable H2 storage systems. Among current techniques, formic acid (FA) has been identified as an efficient energy carrier for H2 storage. Numerous homogeneous catalysts based on transition metals with high activity and selectivity have been reported for selective FA dehydrogenation. In this review, we outline the recent advances in transition-metal molecular catalysts for FA dehydrogenation. Selected catalytic systems that could be implemented on an industrial scale and considered potential materials in fuel cell (FC) technology have been cost-evaluated. We highlight some critical engineering... [more]

The primary purpose of recent research on solar cells is to achieve a higher power conversion efficiency with stable characteristics. To push the developments of photovoltaic (PV) technology, tandem solar cells are being intensively researched, as they have higher power conversion efficiency (PCE) than single-junction cells. Perovskite solar cells (PSCs) are recently used as a top cell of tandem solar cells thanks to their tunable energy gap, high short circuit current, and low cost of fabrication. One of the main challenges in PSCs cells is the stability issue. Carbon perovskite solar cells (CPSCs) without a hole transport material (HTM) presented a promising solution for PSCs’ stability. The two-terminal monolithic tandem solar cells demonstrate the commercial tandem cells market. Consequently, all the proposed tandem solar cells in this paper are equivalent to two-terminal monolithic tandem devices. In this work, two two-terminal tandem solar cells are proposed and investigated usin... [more]

The research on renewable energy is actively looking into electrocatalysts based on transition metal chalcogenides because nanostructured electrocatalysts support the higher intrinsic activity for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). A major technique for facilitating the conversion of renewable and sustainable energy is electrochemical water splitting. The aim of the review is to discuss the revelations made when trying to alter the internal and external nanoarchitectures of chalcogenides-based electrocatalysts to enhance their performance. To begin, a general explanation of the water-splitting reaction is given to clarify the key factors in determining the catalytic performance of nanostructured chalcogenides-based electrocatalysts. To delve into the many ways being employed to improve the HER’s electrocatalytic performance, the general fabrication processes utilized to generate the chalcogenides-based materials are described. Similarly, to... [more]

In the material transfer area, the belt is exposed to considerable damage, the energy of falling material is lost, and there is significant dust and noise. One of the most common causes of failure is transfer chute blockage, when the flow of material in the free fall or loading zone is disturbed by oversized rock parts or other objects, e.g., rock bolts. The failure of a single transfer point may cause the entire transport route to be excluded from work and associated with costly breakdowns. For this reason, those places require continuous monitoring and special surveillance measures. The number of methods for monitoring this type of blockage is limited. The article presents the research results on the possibility of visual monitoring of the transfer operating status on an object in an underground copper ore mine. A standard industrial RGB camera was used to obtain the video material from the transfer point area, and the recorded frames were processed by a detection algorithm based on... [more]

The pore structure parameters of coal have an important influence on the exploration and development of coalbed methane. In this study, a series of pore structure parameters, including porosity, pore radius, pore throat radius, pore coordination number, pore throat ratio, and specific surface area, are identified, extracted, and calculated in the scanning electron microscopy (SEM) images of coal reservoir samples using algorithms and application programs in MATLAB. Constant rate-controlled mercury injection and low-temperature N2 adsorption experiments were carried out to determine the accuracy of the SEM image-based processing analysis results. Characterization results show that the distribution of pore radius in the target coal samples of different organic matters range from 15 nm to 500 μm with porosity of 1.87−8.31% and radius distribution of 12.7 nm to ~100 μm. A noise-reduction system was constructed to eliminate the optical noise of non-porous features and repair the space affec... [more]

The production of cement accounts for 5 to 7% of carbon dioxide emissions in the world, and its broad-scale use contributes to climate imbalance. As a solution, biotechnology enables the cultivation of bacteria and fungi for the synthesis of calcium carbonate as one of the main constituents of cement. Through biomineralization, which is the initial driving force for the synthesis of compounds compatible with concrete, and crystallization, these compounds can be delivered to cracks in concrete. Microencapsulation is a method that serves as a clock to determine when crystallization is needed, which is assisted by control factors such as pH and aeration. The present review addresses possibilities of working with bioconcrete, describing the composition of Portland cement, analysis methods, deterioration, as well as environmental and energetic benefits of using such an alternative material. A discussion on carbon credits is also offered. The contents of this paper could strengthen the prosp... [more]

Waste-to-energy processes remain essential to ensure the safe and irreversible removal of materials and substances that are (or have become) unsuitable for reuse or recycling, and hence, to keep intended cycles of materials in the circular economy clean. In this paper, the behavior of inorganic compounds in waste-to-energy combustion processes are discussed from a multi-disciplinary perspective, against a background of ever tightening emission limits and targets of increasing energy efficiency and materials recovery. This leads to the observation that, due to the typical complexity of thermally treated waste, the intelligence of combustion control systems used in state-of-the-art waste-to-energy plants needs to be expanded to better control the behavior of inorganic compounds that typically end up in waste furnaces. This paper further explains how this goal can be achieved by developing (experimentally validated) predictive numerical models that are engineering-based and/or data-driven... [more]

In the development of unconventional shale resources, production forecasts are fraught with uncertainty, especially in the absence of a full, multi-data study of reservoir characterization. To forecast Duvernay shale gas production in the vicinity of Fox Creek, Alberta, the multi-scale experimental findings are thoroughly evaluated. The relationship between shale gas production and reservoir parameters is assessed using multiple linear regression (MLR). Three hundred and five core samples from fifteen wells were later examined using the MLR technique to discover the fundamental controlling characteristics of shale potential. Quartz, clay, and calcite were found to comprise the bulk of the Duvernay shale. The average values for the effective porosity and permeability were 3.96% and 137.2 nD, respectively, whereas the average amount of total organic carbon (TOC) was 3.86%. The examined Duvernay shale was predominantly deposited in a gas-generating timeframe. As input parameters, the MLR... [more]

Because of the social, economic, and environmental issues linked with fossil resources, there is a global interest in finding alternative renewable and sustainable resources for energy and materials production. Biomass could be one such renewable material that is available in large quantities. However, biomass physicochemical properties are a challenge for its industrial application. Recently, the torrefaction process was developed to improve the fuel characteristics of biomass. However, in recent days, energy production has slowly been shifting towards solar and wind, and restrictions on thermal power plants are increasing. Thus, there will be a need to find alternative market opportunities for the torrefaction industry. In that regard, there is a quest to find alternative applications of torrefaction products other than energy production. This paper presents a couple of alternative applications of torrefied biomass. Torrefaction process can be used as a biomass pretreatment option fo... [more]

The production of biochar from biomass and industrial wastes provides both environmental and economic sustainability. An effective way to ensure the sustainability of biochar is to produce high value-added activated carbon. The desirable characteristic of activated carbon is its high surface area for efficient adsorption of contaminants. Feedstocks can include a number of locally available materials with little or negative value, such as orchard slash and crop residue. In this context, it is necessary to determine and know the conversion effects of the feedstocks to be used in the production of activated carbon. In the study conducted for this purpose; several samples (piñon wood, pecan wood, hardwood, dried grass, Wyoming coal dust, Illinois coal dust, Missouri coal dust, and tire residue) of biomass and industrial waste products were investigated for their conversion into activated carbon. Small samples (approximately 0.02 g) of the feedstocks were pyrolyzed under inert or mildly oxi... [more]

This paper presents a prototype of a low-cost two-phase axial-gap transverse flux generator, in which the magnetic and electric circuits have been made of reused materials, and the stator housing has been manufactured by 3D printing of plastic. Therefore, this work presents as a novelty the combination of the novel transverse flux topology and two challenging trends in electrical machines manufacturing, such as reusing of components and additive manufacturing. Axial-gap transverse flux machines potentially enable the combination of two of the main advantages of axial flux machines and transverse flux machines, i.e., short axial length and a high number of poles. The two-phase arrangement with shared air gap is of great interest in order to reduce further the axial length while avoiding the use of magnetic materials in the rotor, such as iron or soft magnetic composites. However, the equivalent air gap might be large, with significant leakage and fringing effects as the magnetic flux cl... [more]

A sustainable approach to ensuring the thermal regulation of space is reliable with phase change materials (PCMs) operating at 15−25 °C. Henceforth, there is a need of a search of binary and ternary eutectic PCMs operating at desirable phase transition temperatures of 15−25 °C, high energy storage enthalpy (180−220 J/g), improved thermal conductivity and better absorptivity of solar energy. In this current research, we developed a ternary eutectic inorganic salt hydrate PCM intended for a low-temperature thermal regulation system. Based on the eutectic melting point theory, the phase transition temperature and proportion of sodium carbonate decahydrate (SCD), sodium phosphate dibasic dodecahydrate (SPDD) and sodium sulphate decahydrate (SSD) were determined. As per the calculated proportion, ternary eutectic PCM was experimentally prepared. Furthermore, to enhance the thermal property, graphene nanoplatelets (GNP) were dispersed at weight concentrations of 0.4%, 0.7% and 1.0%. The prep... [more]

A proton exchange membrane fuel cell (PEMFC), as an efficient energy conversion device, has many advantages, such as high energy conversion efficiency and environmentally friendly zero emissions, and is expected to have great potential for addressing the uneven distribution of global green energy. As a core component, the performance of the proton exchange membrane (PEM) directly affects the overall output of the fuel cell system. At present, Nafion membranes with good, comprehensive properties are the most widely used commercial proton exchange membrane materials. However, Nafion membranes demonstrate a great inadaptability with an increase in operating temperatures, such as a rapid decay in proton conductivity. Therefore, enhancing the overall performance of Nafion membranes under high temperatures and low relative humidity (RH) has become an urgent problem. Although many efforts have been made to solve this problem, it is difficult to find the balance point between high-temperature... [more]

In a casing-cement sheath-formation system, the cement−formation interface is usually weakly cemented for the residual of drilling mud, in which a leakage path would easily form, threatening the safe operation of underground energy exploitation and storage. To evaluate the compressive and shear mechanical behavior of the cement−formation interface, cement−rock composite cylindrical specimens were prepared. Uniaxial and triaxial compression and direct shear tests were implemented. The flushing efficiency of the rock surface, compressive strength, interface incompatible deformation, parameters of shear strength, and morphology of shear failure surface were acquired and analyzed. Results show that the flushing efficiency of shale surface decreases from 76.7% to 64.2% with the surface roughness increasing from 0 to 2 mm. The flushing efficiency of sandstone is only 44.7%, remarkably lower than that of shale. With the stress condition transforming from uniaxial to triaxial compression, the... [more]

The present study is focused on the synthesis of zirconium dioxide (ZrO2) nanomaterials using the hydrothermal method assisted by microwave irradiation and solution combustion synthesis. Both synthesis techniques resulted in ZrO2 powders with a mixture of tetragonal and monoclinic phases. For microwave synthesis, a further calcination treatment at 800 °C for 15 min was carried out to produce nanopowders with a dominant monoclinic ZrO2 phase, as attested by X-ray diffraction (XRD) and Raman spectroscopy. The thermal behavior of the ZrO2 nanopowder was investigated by in situ XRD measurements. From the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images, the presence of near spherical nanoparticles was clear, and TEM confirmed the ZrO2 phases that comprised the calcinated nanopowders, which include a residual tetragonal phase. The optical properties of these ZrO2 nanopowders were assessed through photoluminescence (PL) and PL excitation (PLE) at room temp... [more]

This work aimed to synthesize biodiesel from Ricinus communis L., using calcium oxide (CaO) nanoparticles as a catalyst. The CaO nanoparticles were examined by scanning electron microscopy (SEM) and X-Ray Diffraction (XRD). The physico-chemical properties of biodiesel were studied through H and C-NMR, GC-MS, FT-IR, and fuel properties were studied according to ASTM and EN standard methods. The oil content of the feedstock was 53.7% with a free fatty acid (FFA) content of 0.89 mg KOH/g. The suitable condition for the optimum yield (89%) of biodiesel was 1:15 of oil to methanol using 20 mg of catalyst at a temperature of 60 °C for 80 to 100 min of reaction time. The H and C-NMR confirm the biodiesel synthesis by showing important peaks at 3.661, 2.015−2.788, 24.83−34.16 and 174.26 and 130.15 ppm. Similarly, GC-MS spectroscopy confirmed 18 different types of fatty acid methyl esters (FAME) in the biodiesel sample. FT-IR spectroscopy confirmed the synthesis of biodiesel by showing characte... [more]

Most power transformers are oil-immersed transformers for which its insulation system consists of oil and cellulosic solid. The insulation liquid impregnates the solid-covering air spaces, which improves the efficiency of the insulation system. Not only does the oil ensure electrical insulation but it also works as coolants transferring the heat generated during transformer operation to the exterior of the transformer. Throughout normal operation conditions, transformers experience multiple stresses that degrade their insulation. Since the lifetime of oil-immersed transformers is defined mainly by the state of the insulation paper, it is critical to understand the behavior and degradation mechanisms of new insulation systems that try to overcome the drawbacks of mineral oil as well as to improve power transformer performances. The current increased prevalence of the nonlinear loads additionally stresses power transformers, which generates their premature ageing or even failure. Consequ... [more]

The anchoring quality of bolts is related to roadway safety and the surrounding rock stability. Due to the limitations of conventional monitoring methods in capturing strain, there still exists a gap in the real-time perception of the mechanical properties of bolts at the micro-scale. This paper proposes a new approach to detecting bolts’ anchoring qualities based on the fiber Bragg grating sensing principle. Moreover, it studies the strain transmission mechanism between the surface-bonded fiber Bragg grating and the bolt. A fiber-optic monitoring test platform of anchor bolt anchoring quality is built. The full-length anchor bolt’s strain evolution law and axial force distribution characteristics are studied during the pull-out test. The study results have shown that the theoretical value of the fiber strain transfer coefficient can be used to calculate the strain of the bolt. The bolt pull-out test verified the accuracy of using the fiber Bragg grating bolt axial force characterizati... [more]

The liquid chemical hydrogen storage technology has great potentials for high-density hydrogen storage and transportation at ambient temperature and pressure. However, its commercial applications highly rely on the high-performance heterogeneous dehydrogenation catalysts, owing to the dehydrogenation difficulty of chemical hydrogen storage materials. In recent years, the chemists and materials scientists found that the supported metal nanoparticles (MNPs) can exhibit high catalytic activity, selectivity, and stability for the dehydrogenation of chemical hydrogen storage materials, which will clear the way for the commercial application of liquid chemical hydrogen storage technology. This review has summarized the recent important research progress in the MNP-catalyzed liquid chemical hydrogen storage technology, including formic acid dehydrogenation, hydrazine hydrate dehydrogenation and ammonia borane dehydrogenation, discussed the urgent challenges in the key field, and pointed out t... [more]

The conventional fracture in shale hydraulic fracturing belongs to the type-I fracture, and the size of the fracture process zone (FPZ) is an important index to measure the fracability of rock mass. This index is also one of the feasible entry points to study the complexity of the fracture network. In order to visually observe the type-I FPZ at the tip of shale fractures, and to study the relationship between the mechanical properties, the shape and size of the FPZ, and the bedding structure, Notched Semi-Circular Bend (NSCB) tests were conducted with three typical fracture direction-bedding orientations (splitter, arrester, divider). The digital image correlation (DIC) method was used to realize the intuitive observation of the real fracture process and the FPZ near the fracture tip. The test found that the FPZ of shale is narrow and long as a whole and is “flame-like”. The height-to-length ratio of the FPZ at the fracture tip determines whether bending and deflection happen between t... [more]