A method of determining the effective thermal conductivity of moist capillary-porous materials has been proposed, in which calculations are carried out while taking into account all components of the system (solid, liquid and gas) at once. The method makes it easy to take into account the way water is distributed in the pore space of the material, either as isolated inclusions (drops) or as a continuous component, depending on the moisture content of the material. In the analysis of heat transport in moist capillary-porous materials, the theory of generalized conductivity is used and the structure of moist material is modeled using an ordered geometric structure consisting of identical unit cells in the form of a cube. An equation is obtained for calculating the effective conductivity of capillary-porous materials with isolated and continuous liquid inclusions, with adiabatic and isothermal division of the unit cell. The proposed method is compared to the previously proposed method of... [more]

The accuracy of fitting the rheological model to the properties of actual drilling fluid minimises the errors of the calculated technological parameters applied while drilling oil wells. This article presents the methodology of selecting the optimum drilling fluid rheological model. Apart from classical rheological models, i.e., the Newtonian, Bingham Plastic, Casson, Ostwald de Waele and Herschel−Bulkley models, it has been proposed to consider the Vom Berg and Hahn-Eyring models, which have not been applied to describe drilling fluids so far. In the process of determining rheological parameters for the Bingham Plastic, Casson, Ostwald de Waele and Newtonian models, it is proposed to use a linear regression method. In the case of the Herschel−Bulkley, Vom Berg and Hahn-Eyring models, it is suggested to use a non-linear regression method. Based on theoretical considerations and mathematical relations developed in the Department of Drilling and Geoengineering, Drilling, Oil and Gas Facu... [more]

Previous studies have shown that different parameters such as reservoir conditions (e.g., pressure, temperature, and brine chemistry) and wellbore hydraulics influence the scaling tendency of minerals on the surfaces of completion tools in conventional resources. Although different studies have investigated the suitable conditions for the precipitation of scaling minerals, there is still a lack of understanding about the composition of the scaling materials deposited on the surfaces of completion tools in thermal wells. In this study, we presented a laboratory workflow combined with a predictive toolbox to evaluate the scaling tendency of minerals for different downhole conditions in thermal wells. First, the scaling indexes (SIs) of minerals are calculated for five water samples produced from thermal wells located in the Athabasca and Cold Lake areas in Canada using the Pitzer theory. Then, different characterization methods, including scanning electron microscopy (SEM) with energy di... [more]

We suggest an alternative to conventional coating methods for accident-tolerant fuel (ATF) cladding. A Zircaloy-4 tube was inserted into metal tubes of different materials and the inserted tubes were subjected to physical force at room temperature. The manufactured tube exhibited a pseudo-single tube (PST) structure and had higher thermal stability than a Zircaloy-4 tube. Optical microscopy and scanning electron microscopy images showed that the PST had a uniform and well-bonded interface structure, i.e., no gaps or voids were found at the interface between the inner and outer tubes. Energy-dispersive X-ray spectroscopy analysis confirmed that the metal components did not interdiffuse at the interface of the PST, even after being kept at 600 and 900 °C for 1 h and rapidly cooled to room temperature. Unlike pure Zircaloy-4 tubes, Zircaloy-4/stainless use steel (SUS) 316 PST did not show significant structural collapse, even after being stored at 1200 °C for 1 h. Based on these results,... [more]

Thin films and coatings which have a high demand in a variety of industries—such as manufacturing, optics, and photonics—need regular improvement to sustain industrial productivity. Thus, the present work examined the problem of the Carreau thin film flow and heat transfer with the influence of thermocapillarity over an unsteady stretching sheet, numerically. The sheet is permeable, and there is an injection effect at the surface of the stretching sheet. The similarity transformation reduced the partial differential equations into a system of ordinary differential equations which is then solved numerically by the MATLAB boundary value problem solver bvp4c. The more substantial effect of injection was found to be the reduction of the film thickness at the free surface and development of a better rate of convective heat transfer. However, the increment in the thermocapillarity number thickens the film, reduces the drag force, and weakens the rate of heat transfer past the stretching shee... [more]

To improve the low viscosity and poor lubrication characteristics of high-water-based hydraulic liquid, the abrasion and leakage problems in hydraulic components need to be addressed. In a high water-based hydraulic motor with self-balanced distribution valve (HWBHM-SDV), there are two key friction pairs: the piston-crankshaft pair and piston-swivelling-cylinder (PSC) pair. To study the working performance of the PSC pair in HWBHM-SDV, we firstly designed the structural parameters. We found that, within the working speed 0−100 rpm, the leakage in the PSC pair is mainly caused by pressure-gradient flow, and the influence of the seal will not be significant when the seal length is 24 mm. Then, the friction coefficients of different matching materials were tested. It was found that the friction coefficient of 316L stainless steel with OVINO-GIC (OVINO-graphite intercalated compound) coating (316L-GIC)/PEEK reinforced with 30% carbon fibre (PEEK-30CF) is about 0.02~0.04, and the friction c... [more]

The paper presents an analysis of local and global forces acting on the ferromagnetic material of a modulator in a co-axial magnetic gear, taking several design variants and the impact of loading into account. The analyses include a modulator with cores manufactured from a soft-magnetic composite material and two variants made from electrical steel with laminations stacked in different directions. Variations of local forces acting on individual pole pieces of the modulator are analyzed at different loads, showing that the force spectra are subject to significant variation with an increasing load. The presented magnetostatic analyses are extended by structural analysis that provides estimation of stress and displacement for the modulator assembled from additively manufactured acrylonitrile butadiene styrene (ABS)-plastic parts. The analysis carried out for the least favorable design case of the magnetic circuit of the modulator shows that an application of the technology is significantl... [more]

In this article, the impact of effective Prandtl number model on 3D incompressible flow in a rotating channel is proposed under the influence of mixed convection. The coupled nonlinear system of partial differential equations is decomposed into a highly nonlinear system of ordinary differential equations with aid of suitable similarity transforms. Then, the solution of a nonlinear system of ordinary differential equations is obtained numerically by using Runge−Kutta−Fehlberg (RKF) method. Furthermore, the surface drag force C f and the rate of heat transfer N u are portrayed numerically. The effects of different emerging physical parameters such as Hartmann number (M), Reynold’s number (Re), squeezing parameter ( β ), mixed convection parameter λ , and volume fraction ( φ ) are also incorporated graphically for γ — alumina. Due to the higher viscosity and thermal conductivity ethylene-based nanofluids, it is observed to be an effective common bas... [more]

The article presents the recipe for ultra-lightweight cement slurry for wellbore sealing. In ordinary lightweight cement slurries, the addition of microspheres and a large amount of water are used to maintain rheological parameters. This is a problem because the light particles of microspheres segregate. The cement sheath from such a cement slurry has an anisotropic microstructure and does not stabilize the casing column. In the new ultra-light cement slurry, 60% aluminosilicate microspheres and a large amount of water were used. The ultra-light weight slurry has a density below 1.2 g/cm3. This cement slurry does not segregates and in the sedimentation stability test has the same density at all measuring points. The cement slurry, despite the larger amount of water, has the same filtration as the control sample. The technological parameters of the slurry are adapted to the borehole conditions. Cement slurry is a ready-made application to seal a borehole with poor wellbore stability und... [more]

For several decades, constant research has been performed in the world in order to obtain more durable, tighter, or less environmentally harmful binding materials which could be used to seal casing strings in boreholes. There is an increasing search for innovative solutions allowing the production of the highest possible class of binding cements. Since the beginning of the 21st century, one thing which has become synonymous with development is nanotechnology—a dynamically growing branch of science involving both the design, production, and testing of structures with the size of billionths of a metre. Among other things, a set cement stone is made of the grains of hydrated calcium silicates and calcium aluminates, between which there are pore spaces. Fine grains of nanoparticles can successfully settle inside these spaces, causing a decrease in the porosity and permeability of cement matrix. The paper presents the results of laboratory tests performed for formulas of cement slurries con... [more]

Knowledge about the driving forces behind greenhouse gasses (GHG) emissions is crucial for informed and evidence-based policy towards mitigation of GHG emission and changing production and consumption patterns. Both national and regional-level authorities are capable of addressing their actions more effectively if they have information about the spatial distribution of phenomena related to the policies they conduct. In this context, the main aim of this paper is to explain the regional differences in carbon intensity in Poland. The differences in carbon intensity between regions and the national average were analysed using index decomposition analysis (IDA). Aggregate carbon intensity for regional economies as well as the carbon intensity of households was investigated. For both levels of analysis: total emissions and emission from households economic development is the key factor responsible for the inter-regional differences in carbon emission per capita. In the case of total emissio... [more]

A solution-processable Ag2Se nanoparticle thin film (NPTF) is a prospective thermoelectric material for plastic-based thermoelectric generators, but its low electrical conductivity hinders the fabrication of high performance plastic-based thermoelectric generators. In this study, we design Ag2Se NPTFs embedded with silicon nanowires (SiNWs) to improve their thermoelectric characteristics. The Seebeck coefficients are −233 and −240 µV/K, respectively, for a Ag2Se NPTF alone and a Ag2Se NPTF embedded with SiNWs. For the Ag2Se NPTF embedded with SiNWs, the electrical conductivity is improved from 0.15 to 18.5 S/m with the embedment of SiNWs. The thermal conductivities are determined by a lateral thermal conductivity measurement for nanomaterials and the thermal conductivities are 0.62 and 0.84 W/(m·K) for a Ag2Se NPTF alone and a Ag2Se NPTF embedded with SiNWs, respectively. Due to the significant increase in the electrical conductivity and the insignificant increase in its thermal conduc... [more]

Due to growing consciousness regarding the environmental impact of fossil-based and non-sustainable materials in construction and building applications, there have been an increasing interest in bio-based and degradable materials in this industry. Due to their excellent chemical and thermo-physical properties for thermal energy storage, bio-based phase change materials (BPCMs) have started to attract attention worldwide for low to medium temperature applications. The ready availability, renewability, and low carbon footprint of BPCMs make them suitable for a large spectrum of applications. Up to now, most of the BPCMs have been incorporated into inorganic matrices with only a few attempts to set the BPCMs into bio-matrices. The current paper is the first comprehensive review on BPCMs incorporation in wood and wood-based materials, as renewable and sustainable materials in buildings, to enhance the thermal mass in the environmentally-friendly buildings. In the paper, the aspects of choo... [more]

The main drawback of phase change materials (PCMs) is their low thermal conductivity, which limits the possibilities of a wide range of implementations. Therefore, the researchers, as found in the literature, proposed several methods to improve the thermal conductivity of PCMs, including inserting high thermal conductivity materials in nano-, micro-, and macro-scales, as well as encapsulation of PCMs. However, these inserts impact the other properties of PCMs like latent heat, melting temperature, thermal stability, and cycling stability. Hence, this paper aims to review the available in the open literature research on the main properties of enhanced PCMs that undergo solid−liquid transition. It is found that inserting high thermal conductivity materials and encapsulation results in improved thermal conductivity of PCMs, but it decreases their latent heat. Moreover, the insertions can act as nucleating agents, and the supercooling degree can be reduced. Some of the thermal conductivity... [more]

New materials and technologies have become the main drivers for reducing energy demand in the building sector in recent years. Energy efficiency can be reached by utilization of materials with thermal storage potential; among them, phase change materials (PCMs) seem to be promising. If they are used in combination with solar collectors in heating applications or with water chillers or in chilled ceilings in cooling applications, PCMs can provide ecological benefits through energy savings during the building’s operational phase. However, their environmental value should be analyzed by taking into account their whole lifecycle. The purpose of this paper is the assessment of PCMs at the material level as well as at higher levels, namely the component and building levels. Life cycle assessment analyses are based on information from PCM manufacturers and building energy simulations. With the newly developed software “Storage LCA Tool” (Version 1.0, University of Stuttgart, IABP, Stuttgart,... [more]

Whether renewable energy sources (RES) will provide sufficient energy surplus to entirely power complex modern societies is under discussion. We contribute to this debate by estimating the current global average energy return on energy invested (EROI) for the five RES technologies with the highest potential of electricity generation from the comprehensive and internally consistent estimations of their material requirements at three distinct energy system boundaries: standard farm-gate (EROIst), final at consumer point-of-use (EROIfinal), and extended (including indirect investments, EROIext). EROIst levels found fall within the respective literature ranges. Expanding the boundaries closer to the system level, we find that only large hydroelectricity would currently have a high EROIext ~ 6.5:1, while the rest of variable RES would be below 3:1: onshore wind (2.9:1), offshore wind (2.3:1), solar Photovoltaic (PV) (1.8:1), and solar Concentrated Solar Power (CSP) (<1:1). These results... [more]

A supercapacitor is a potential energy system that will be a part of an efficient storage device of renewable energy, such as a small battery and a large energy storage system (ESS), etc. However, a lot of efforts have been devoted to improving stability. Generally, ABO3-type perovskite structure has been studied as an electrode and/or an oxide ion-conducting electrolyte for solid oxide fuel cells with stable structural stability at high temperatures. In this study, perovskite material (La0.8Sr0.2Mn0.5Co0.5O3-δ. LSMCO) was added as a component of the supercapacitor electrode for enhanced stability. According to electrochemical measurements, at 5 mV/s, the specific capacitance of the graphene-based electrode (G95) is 68 F/g, and the electrode mixed with perovskite (G70L25) is 55 F/g. Nonetheless, the standard deviation of the capacitance value of G70L25 is smaller than that of G95. Alongside this, the G70L25 electrode showed that specific capacitance decreased in the cycling test, but,... [more]

Electrospun fibers with different concentrations of polyacrylonitrile (PAN) were synthesized and the results are reported in this study. The aim was to obtain carbon nanofibers for manufacturing gas diffusion layers for proton exchange membrane (PEM) fuel cells. The electrospun fibers obtained were carbonized at 1200 °C, 1300 °C, and 1400 °C, in order to have nanofibers with more than 96% of carbon atoms. The scanning electron microscopy (SEM) results revealed an increase in the diameter from 400−700 nm at 1200 °C to 1000−1400 nm at 1300 °C and 1400 °C. The Raman measurements disclose a higher degree of crystallinity for the sample carbonized at elevated temperatures. The surface area was estimated from the Brunauer−Emmett−Teller (BET) method and the results revealed an increase from 40.69 m2g−1 to 66.89 m2g−1 and 89.92 m2g−1 as the carbonization temperature increased. Simultaneously, the pore volume increased with increasing carbonization temperature. The Fourier-transform infrared sp... [more]

Battery-powered electric buses currently face the challenges of high cost and limited range, especially in winter conditions, where interior heating is required. To face both challenges, the use of thermal energy storage based on metallic phase change materials for interior heating, also called thermal high-performance storage, is considered. By replacing the battery capacity through such an energy storage system, which is potentially lighter, smaller, and cheaper than the batteries used in buses, an overall reduction in cost and an increase of range in winter conditions could be reached. Since the use of thermal high-performance storage as a heating system in a battery-powered electric bus is a new approach, the requirements for such a system first need to be known to be able to proceed with further steps. To find these requirements, a review of the relevant state of the art of battery-powered electric buses, with a focus on heating systems, was done. Other relevant aspects were vehic... [more]

The continuous increase of the world’s population results in an increased demand for energy drastically from the industrial and domestic sectors as well. Moreover, the current public awareness regarding issues such as pollution and overuse of petroleum fuel has resulted in the development of research approaches concerning alternative renewable energy sources. Amongst the various options for renewable energies used in transportation systems, biodiesel is considered the most suitable replacement for fossil-based diesel. In what concerns the industrial application for biodiesel production, homogeneous catalysts such as sodium hydroxide, potassium hydroxide, sulfuric acid, and hydrochloric acid are usually selected, but their removal after reaction could prove to be rather complex and sometimes polluting, resulting in increases on the production costs. Therefore, there is an open field for research on new catalysts regarding biodiesel production, which can comprise heterogeneous catalysts.... [more]

The temperature and field dependencies of electric conductivities of two types of silicone rubber-based polymers intended for use in high voltage direct current applications are presented and discussed. The conductivities obtained with the standard method by measuring a current through the material sample placed between metallic electrodes in response to the applied voltage are compared with those deduced from the measured potential decay on pre-charged material surface in an open circuit configuration. The measurements were conducted in the range of the applied electric field strength (0.5−5) kV/mm and temperatures ranging from 22 °C to 70 °C. It is shown that the values of the conductivities obtained by the two methods are in agreement and their temperature dependences obey Arrhenius law yielding similar activation energies.

Laminae are well developed in shale and generally influence fracture propagation during hydraulic fracturing. Hence, comprehensively understanding the tension and shear behaviors of shale laminae is crucial. There have been limited systematic studies thus far on the tensile and shear strength as well as fracture morphology of shale laminae. In this study, the Lower Silurian Longmaxi Shale (China) was investigated via Brazilian tensile and angle-varied plate shear tests. Five lamina types were tested, i.e., calcite (Cal), pyrite (Py), organic-enriched (Oc), the interface between Cal and Oc (Cal-Oc), and the interface between Py and Oc (Py-Oc) laminae. Results showed that the tensile strength was in the range 0.43−8.22 MPa, mainly in the order of Cal > Py > Cal-Oc > Py-Oc > Oc. The modes of fracture morphology were highly related to the occurrence, continuity, and mineralogy fillings of laminae. Shear strength parameters were within the range 22.50−29.64 MPa for cohesion and 37.29−43.60°... [more]

The most critical positions of a prefabricated cable accessory, from the electrical point of view, are the interfaces between the stress cone and its surroundings. Accordingly, the contact pressure on those interfaces needs to be carefully designed to assure both good dielectric strength and smooth installation of the stress cone. Nevertheless, since stress cones made from rubber are under large deformation after installation, their internal stress distribution is neither practical to measure directly by planting sensors, nor feasible to compute accurately with the conventional theory of linear structural mechanics. This paper presents one sophisticated method for computing the mechanical stress distribution in rubber stress cones of cable accessories by employing hyperelastic models in a computation model based on the finite element method. This method offers accurate results for rubber bodies of complex geometries and large deformations. Based on the method, a case study of a composi... [more]

The concept of a single-input/multi-output thermal network was proposed by the Development of Libraries of Physical models for an Integrated design environment (DELPHI) consortium more than twenty years ago. The present work highlights the recent improvements made to efficiently derive a low-computing-effort model from a fully detailed numerical model and to characterize its performances. The temperature predictions of a deduced ball-grid-array (BGA) dynamic compact thermal model are compared to those of a realistic three-dimensional representation, including the large set of internal copper traces, as well as its board structure, which has been validated by experiment. The current study discloses a method for creating an amalgam reduced-order modal model (AROMM) for that electronic component family that allows the preservation of the geometry integrity and shortening scenarios computation. Typically, the AROMM method reduces by a factor of 600 the computation time needed to obtain the... [more]

Designing the most efficient parabolic trough solar collector (PTSC) is still a demanding and challenging research area in solar energy systems. Two effective recommended methods for this purpose that increase the thermal characteristics of PTSCs are adding turbulators and nanofluids. To study the effects of the two approaches on the energy efficiency of PTSCs, a stainless steel turbulator was used and solid nanoparticles of Cu/SBA-15 were added to the water with the volume concentrations of 0.019% to 0.075%. The generated turbulence in the fluid flow was modeled by the SST k−ω turbulent model. The results in daylight demonstrated that energy efficiency increases steadily by 11:30 a.m., and then, starts to drop gradually due to more irradiations at noon. It was observed that applying the turbulator to the studied PTSC has a significant influence on the enhancement of energy efficiency. Adding the nanoparticles augmented the average Nusselt number inside the solar collector in various s... [more]