Browse
Subjects
Records with Subject: Process Operations
Showing records 451 to 475 of 716. [First] Page: 15 16 17 18 19 20 21 22 23 Last
Recent Advancements in Automated Vehicle Certification: How the Experience from the Nuclear Sector Contributed to Making Them a Reality
Riccardo Donà, Biagio Ciuffo, Anastasios Tsakalidis, Lorenzo Di Cesare, Calogero Sollima, Marco Sangiorgi, Maria Cristina Galassi
February 24, 2023 (v1)
Keywords: automated driving, investigation, monitoring, operational data, reporting, safety, virtual testing
The current paper discusses the most recent advancements in automated vehicle (AV) certification and how existing regulations/best practices from the nuclear field helped make AVs a reality. In particular, three main pillars differentiate the newly devised certification frameworks from previous automotive regulations: the introduction of a safety management system, the adoption of in-service monitoring and reporting data logging systems, and the use of virtual testing to demonstrate the safety of the AV; a set of pillars that are also found in the nuclear practice. The argumentation is informed by relevant literature and shared experiences from the nuclear power plant and transportation fields where there are established safety practices to manage safety-critical cyber-physical systems. Although the nuclear and transportation fields might seem unrelated, strong synergies were found, including risk management approaches and operational data collection procedures, which supported the tim... [more]
Classifying Facies in 3D Digital Rock Images Using Supervised and Unsupervised Approaches
Cenk Temizel, Uchenna Odi, Karthik Balaji, Hakki Aydin, Javier E. Santos
February 24, 2023 (v1)
Keywords: classification, supervised learning, unsupervised learning
Lithology is one of the critical parameters influencing drilling operations and reservoir production behavior. Well completion is another important area where facies type has a crucial influence on fracture propagation. Geological formations are highly heterogeneous systems that require extensive evaluation with sophisticated approaches. Classification of facies is a critical approach to characterizing different depositional systems. Image classification is implemented as a quick and easy method to detect different facies groups. Artificial intelligence (AI) algorithms are efficiently used to categorize geological formations in a large dataset. This study involves the classification of different facies with various supervised and unsupervised learning algorithms. The dataset for training and testing was retrieved from a digital rock database published in the data brief. The study showed that supervised algorithms provided more accurate results than unsupervised algorithms. In this stud... [more]
Comparative Study of DC-DC Converters for Solar PV with Microgrid Applications
Ingilala Jagadeesh, Vairavasundaram Indragandhi
February 24, 2023 (v1)
Keywords: coupled inductor converter, full bridge converter, half bridge converter, interleaved converter, micro grid, photo voltaic (PV), resonant converter, zero current switching (ZCS), zero voltage switching (ZVS)
This review emphasizes the role and performance of versatile DC-DC converters in AC/DC and Hybrid microgrid applications, especially when solar (photo voltaic) PV is the major source. Here, the various converter topologies are compared with regard to voltage gain, component count, voltage stress, and soft switching. This study suggests the suitability of the converter based on the source type. The merits of a coupled inductor and interleaved converters in micro gird applications are elucidated. The efficiency and operating frequencies of converts for different operating modes are presented to determine the suitable converters for inductive and resistive loads. The drawbacks of converters are discussed. Finally, the mode of operation of different converts with different grid power sources and its stability and reliability issues are highlighted. In addition, the significance of the converter’s size and cost-effectiveness when choosing various PV source applications are discussed.
Comparison of Traditional Image Segmentation Methods Applied to Thermograms of Power Substation Equipment
Renan de Oliveira Alves Takeuchi, Leandra Ulbricht, Fabiano Gustavo Silveira Magrin, Francisco Itamarati Secolo Ganacim, Leonardo Göbel Fernandes, Eduardo Félix Ribeiro Romaneli, Jair Urbanetz Junior
February 24, 2023 (v1)
Keywords: abnormal operation, image processing, infrared thermography, segmentation, substation equipment
The variation in the thermal state of electrical energy substation equipment is normally associated with natural wear or equipment failure. This can be detected by infrared thermography, but technically it demands a long time to analyze these images. Computational analysis can allow an automated, more agile, and more efficient analysis to detect overheated regions in thermographic images. Therefore, it is necessary to segment the region of interest in the images; however, the results may diverge depending on the technique used. Thus, this article presents the improvement of four different techniques implemented in Python and applied in a substation under real operating conditions for a period of eleven months. The performance of the four methods was compared using eight statistical performance measures, and the efficiency was measured by the runtime. The segmentation results showed that the methods based on a threshold (Otsu and Histogram-Based Threshold) were fast, with processing tim... [more]
Operation of an Energy Storage System Integrated with a Photovoltaic System and an Industrial Customer under Different Real and Pseudo-Real Profiles
Michał Jasiński, Arsalan Najafi, Tomasz Sikorski, Paweł Kostyła, Jacek Rezmer
February 24, 2023 (v1)
Keywords: energy storage system (ESS), load profiles, operation of energy storage system, photovoltaic (PV)
This article presents an idea of the implementation of different real load profiles for energy storage system (ESS) operation. The considered approaches are based on real long-term measurements using energy meters, the adaptation of the standard profiles defined by the distribution system operator (DSO), as well as a mix of the level of contracted power and short-term measurements. All combinations are used as electricity demand to formulate an ESS operation plan that cooperates with the PV system and the electricity market. The GAMS solver is applied to obtain optimal operation tasks of the ESS to cover different real and pseudo-real load profiles of an industrial company. Obtained results are presented using a real case study of a metallurgy company with a 317 kWp photovoltaic installation and a 200 kW ESS.
Automated Classification of Pipeline Defects from Ultrasonic Phased Array Total Focusing Method Imaging
Haibin Wang, Zhichao Fan, Xuedong Chen, Jingwei Cheng, Wei Chen, Zhe Wang, Yangguang Bu
February 24, 2023 (v1)
Keywords: energy safety, support vector machine, total focusing method, ultrasonic phased array
The defects in the welds of energy pipelines have significantly influenced their safe operation. The inefficient and inaccurate detection of the defects may give rise to catastrophic accidents. Ultrasonic phased array inspection is an important means of ensuring pipeline safety. The total focusing method (TFM), using ultrasonic phased arrays, has become widely used in recent years in non-destructive evaluation (NDE). However, manual defect recognition of TFM images is seen to lack accuracy and robustness, arising from deficiency of practical experience. In this paper, the automated classification of different defects from TFM images is studied with a view to facilitate inspection efficacy. By experimentally implementing the TFM approach on a bespoke specimen, the images corresponding to crack-like defects and pore-like defects were employed to investigate the effectiveness of four different machine learning models (known as Support Vector Machine, CART Decision tree, K Nearest Neighbor... [more]
Comparative Study on Shading Database Construction for Urban Roads Using 3D Models and Fisheye Images for Efficient Operation of Solar-Powered Electric Vehicles
Jieun Baek, Yosoon Choi
February 24, 2023 (v1)
Keywords: 3D models, fisheye images, shading database, shading matrix, solar-powered electric vehicles
Accounting for shadows on urban roads is a complex task in the operation of solar-powered electric vehicles. There have been few opportunities to compare the methods and tools for the construction of an effective shading database for urban roads. This study quantitatively investigated and compared shading matrices generated from 3D models or fisheye images. Skymaps were formed considering the geometry of nearby shading obstructions. Sun-path diagrams tracking the position of the sun by time and season were overlaid on the skymaps, and month-by-hour shading matrices were calculated. Mean squared error (MSE) was used to clarify the quantitative differences between the shading matrices. The cases were divided into A, B, and C according to the presence of buildings and trees around the survey points. Under case A (trees), case B (buildings and trees), and case C (buildings), the average MSEs between the matrices were 24.5%, 23.9%, and 2.1%, respectively. The shading matrices using either 3... [more]
Research on the Optimal Economic Power Dispatching of a Multi-Microgrid Cooperative Operation
Haipeng Wang, Xuewei Wu, Kai Sun, Yuling He
February 24, 2023 (v1)
Keywords: economic power dispatching, multi-microgrid, multiple scenarios, PSO
The economic power-dispatching model of a multi-microgrid is comprehensively established in this paper, considering many factors, such as generation cost, discharge cost, power-purchase cost, power sales revenue, and environmental cost. To construct this model, power interactions between the two microgrids and those between the micro- and main grids are considered. Furthermore, the particle swarm optimization (PSO) algorithm is utilized to solve the economic power-dispatching model. To validate the effectiveness of the proposed model as well as the solution algorithm, a practical project case is studied and discussed. In the case study, the impact of multiple scenarios is first analyzed. Then, the system operation economic costs under different scenarios are described in detail. Moreover, according to the optimization power-dispatching results of the multi-microgrid, power interactions between the two microgrids and those between the micro- and main grids are fully discussed.
Optimizing Operation Strategy in a Simulated High-Proportion Wind Power Wind−Coal Combined Base Load Power Generation System under Multiple Scenes
Qingbin Yu, Yuliang Dong, Yanjun Du, Jiahai Yuan, Fang Fang
February 24, 2023 (v1)
Keywords: Gaussian distribution, unit commitment decision, wind energy curtailment boundary, wind—coal combined power generation system
In order to accommodate more intermittent renewable energy in coal-dominated power systems, conventional thermal power plants need to improve their operational flexibility to balance the energy system at all times. However, flexible operation of coal-fired power plants could reduce energy efficiency and increase CO2 and pollutant emission, so it is important to consider environmental implications and optimize the dispatch of wind and coal power units in the system. In this paper, based on the output profile of wind power, a wind power peak (T, H) simulation model based on Gaussian distribution was established. Using a high-proportion wind power wind−coal combined base load power generation system as an example, the economical and environmentally friendly unit operation based on different wind power penetration was studied by simulation, and the decision strategy was established. Wind energy curtailment boundary was determined with power generation cost, energy consumption, CO2 and poll... [more]
X-ray and Synchrotron FTIR Studies of Partially Decomposed Magnesium Borohydride
Rashmi Dahal, Jenny G. Vitillo, Anna C. Åsland, Christoph Frommen, Stefano Deledda, Olena Zavorotynska
February 24, 2023 (v1)
Keywords: boron K-edge, hydrogen storage, magnesium borohydride, soft X-ray absorption spectroscopy, synchrotron FTIR
Magnesium borohydride (Mg(BH4)2) is an attractive compound for solid-state hydrogen storage due to its lucratively high hydrogen densities and theoretically low operational temperature. Hydrogen release from Mg(BH4)2 occurs through several steps. The reaction intermediates formed at these steps have been extensively studied for a decade. In this work, we apply spectroscopic methods that have rarely been used in such studies to provide alternative insights into the nature of the reaction intermediates. The commercially obtained sample was decomposed in argon flow during thermogravimetric analysis combined with differential scanning calorimetry (TGA-DSC) to differentiate between the H2-desorption reaction steps. The reaction products were analyzed by powder X-ray diffraction (PXRD), near edge soft X-ray absorption spectroscopy at boron K-edge (NEXAFS), and synchrotron infrared (IR) spectroscopy in mid- and far-IR ranges (SR-FTIR). Up to 12 wt% of H2 desorption was observed in the gravime... [more]
Logistics Centers in Ukraine: Analysis of the Logistics Center in Lviv
Joanna Alicja Dyczkowska, Olga Reshetnikova
February 24, 2023 (v1)
Keywords: logistics centers, regional LC, Ukraine, warehouse
The article analyzes the functioning of existing logistics centers in Ukraine. The logistics real estate segment was developed dynamically in Ukraine in the years before the full-scale invasion of Russia. Most logistics complexes are located in the Kyiv region, sometimes in the cities of Kharkiv, Odesa, Dnipropetrovsk and Lviv. Logistics real estate has suffered significant damage since the start of the war, and some warehouses have been completely destroyed. In order to fulfill a coordinating and integrating role in the implementation of logistics operations in the western region of Ukraine, the authors proposed the creation of a powerful regional logistics center in Lviv. The operation of the center will ensure the provision of a full range of logistics services based on the criterion of minimizing the loss of time and money. The authors proposed an algorithm for determining the optimal location of the logistics center in the region. The regional logistics center has been developed,... [more]
A Vehicle-to-Infrastructure beyond Visual Range Cooperative Perception Method Based on Heterogeneous Sensors
Tong Luo, Long Chen, Tianyu Luan, Yang Li, Yicheng Li
February 24, 2023 (v1)
Keywords: beyond visual range perception, intelligent infrastructure, multi-object detection, vehicle-to-infrastructure cooperation
With the development of autopilot, the performance of intelligent vehicles is constrained by their inability to perceive blind and beyond visual range areas. Vehicle-to-infrastructure cooperative perception has become an effective method for achieving reliable and higher-level autonomous driving. A vehicle-to-infrastructure cooperative beyond visual range and non-blind area method, based on heterogeneous sensors, was proposed in this study. Firstly, a feature map receptive field enhancement module with spatial dilated convolution module (SDCM), based on spatial dilated convolution, was proposed and embedded into the YOLOv4 algorithm. The YOLOv4-SDCM algorithm with SDCM module achieved a 1.65% mAP improvement in multi-object detection performance with the BDD100K test set. Moreover, the backbone of CenterPoint was improved with the addition of self-calibrated convolutions, coordinate attention, and residual structure. The proposed Centerpoint-FE (Feature Enhancement) algorithm achieved... [more]
Experimental Research on the Flow and Heat Transfer Characteristics of Subcritical and Supercritical Water in the Vertical Upward Smooth and Rifled Tubes
Xiaocheng Du, Weiteng Li, Xirong Zhang, Jingrong Chen, Tingyu Chen, Dong Yang
February 24, 2023 (v1)
Keywords: friction resistance coefficient, heat transfer coefficient, supercritical boiler, supercritical water, variable pressure operation
Experiments were conducted to investigate the heat transfer and flow characteristics of the vertical upward smooth and rifled tubes from subcritical to supercritical pressure. The distributions of wall temperature and heat transfer coefficient (HTC) were obtained, and the HTC correlations and friction resistance coefficient correlations were fitted with experimental data. In addition, the influences of heat flux and type of tube on heat transfer performance were analyzed. The research shows that heat flux has different influences on the heat transfer characteristics under different pressures. The increase in heat flux improves the heat transfer characteristics in the nucleate boiling region, yet it leads to the advance in heat transfer deterioration. However, for supercritical water, the increase in heat flux reduces the heat transfer ability. In addition, using the rifled tube not only improves the heat transfer performance, but also inhibits the occurrence of heat transfer deteriorat... [more]
Interconnecting Power-Electronic Buck Converter Modules in a Novel High-Power Test Bench for MVDC Circuit Breakers
Nils Langenberg, Simon Kimpeler, Albert Moser
February 24, 2023 (v1)
Keywords: circuit breaker, high-power testing, medium voltage direct, MVDC, MVDC circuit breaker, MVDC circuit breaker testing, power electronic buck converter
Advances in medium voltage direct current (MVDC) technologies and the penetration of extended MVDC systems are still significantly hindered by the lack of adequate direct current (DC) switching equipment. The fundamentally different fault current behavior in case of a DC fault, compared to faults in alternating current (AC) systems, with regard to the characteristics and development of fault currents and their interruption make dedicated test procedures necessary. One testing approach is the application of a power-electronic buck converter (PEBC) to simulate relevant stresses on DC switching equipment during a DC fault current interruption. Since the associated requirements, especially regarding current ratings of several kiloamperes, cannot be fulfilled by using a singular PEBC, a modularization becomes necessary. However, particularly in high-power applications, the interconnection of several PEBC modules poses significant challenges. In this article, a demonstrator PEBC-based high-p... [more]
Access to Deposits as a Stage of Mining Works
Krzysztof Skrzypkowski, Krzysztof Zagórski, Anna Zagórska, Fhatuwani Sengani
February 24, 2023 (v1)
Keywords: access excavation, adit, decline, inclined shaft, mining area, mining level, shaft
An extremely important role in the underground method of mining deposits is the type of access, which is the initial stage of the mining operations. The main feature of mineral deposits is their exhaustiveness and the inability to restore resources. This necessitates the rational management of deposit resources, especially the minimization of resource losses during exploitation. This article presents information on the mining area and methods of access the deposits. In particular, attention was paid to the advantages and disadvantages of access by means of an adit, decline, and a vertical and inclined shaft. Given the relationships among the various stages of mining works, it was found that the number of active levels depends on the volume of production and the adopted mining methods. In addition, attention was drawn to the fact that the access to deposits at increasing depth is related to the intensification of natural hazards that affect the access structure.
Resiliency-Sensitive Decision Making Mechanism for a Residential Community Enhanced with Bi-Directional Operation of Fuel Cell Electric Vehicles
Fatma Gülşen Erdinç, Alper Çiçek, Ozan Erdinç
February 24, 2023 (v1)
Keywords: common energy storage systems, distributed generation units, energy management, fuel cell electric vehicles, resiliency-sensitive loads, vehicle-to-grid
The trend regarding providing more distributed solutions compared to a fully centralized operation has increased the research activities conducted on the improvement of active regional communities in the power system operation in the last decades. In this study, an energy management-oriented decision-making mechanism for residential end-users based local community is proposed in a mixed-integer linear programming context. The proposed concept normally includes inflexible resiliency-sensitive load−demand activated as flexible during abnormal operating conditions, fuel cell electric vehicles (FCEVs) fed via the hydrogen provided by an electrolyzer unit connected to the residential community and capable of acting in vehicle-to-grid (V2G) mode, common energy storage and photovoltaic (PV) based distributed generation units and dispersed PV based generating options at the end-user premises. The combination of the hydrogen−electricity chain with the V2G capability of FCEVs and the resiliency-... [more]
A Real-Time Method to Estimate the Operational Condition of Distribution Transformers
Leandro José Duarte, Alan Petrônio Pinheiro, Daniel Oliveira Ferreira
February 24, 2023 (v1)
Keywords: automatic diagnostic, distribution transformer, health index, operation map, real-time monitoring, unsupervised learning
In this article, an unsupervised learning method is presented with the objective of modeling, in real-time, the main operating modes (OM) of distribution transformers. This model is then used to assess the operational condition through use of two tools: the operation map and the health index. This approach allows, mainly, for a reduction in the need for the interpretation of results by specialists. The method used the concepts of k-nearest neighbors (k-NN) and Gaussian mixture model (GMM) clustering to identify and update the main OMs and characterize these through operating mode clusters (OMC). The evaluation of the method was performed using data from a case study of almost one year in duration, along with five in-service distribution transformers. The model was able to synthesize 11 magnitudes measured directly in the transformer into two latent variables using the principal component analysis technique, while preserving on average more than 86% of the information present. The opera... [more]
Assessment and Duration of the Surface Subsidence after the End of Mining Operations
Mateusz Dudek, Anton Sroka, Krzysztof Tajduś, Rafał Misa, Dawid Mrocheń
February 24, 2023 (v1)
Keywords: forecasting, Gauss–Markov algorithm, land surface deformation, mining damages, residual subsidence
The change in the European Union’s policy related to the energy transformation of Europe and the departure from fossil energy resources may contribute to the accelerated closure of many coal mines. Therefore, it is necessary to solve the problem of surface subsidence after the end of underground mining and the related suitability of post-mining areas for the re-use of the so-called problem of the reclamation of post-mining areas. In the case of areas suitable for re-use, it is necessary to determine the value of the final subsidence. It is also important to specify the time after which mining influences will no longer have a significant impact on the surface infrastructure and the environment. Analyses of the observed subsidence after the end of the mining operation indicate that this process may last from several months to several dozens or even several hundreds of years. It depends on the individual characteristics of the mining area, including the depth of exploitation, mining syste... [more]
Performance Study of Eductor with Finite Secondary Source for Membrane Distillation
Ravi Koirala, Xing Zhang, Eliza Rupakheti, Kiao Inthavong, Abhijit Date
February 24, 2023 (v1)
Keywords: condensation, eductor, experiment, mechanism visualization, saturation
This is an experimental work performed to identify the influence of direct contact condensation inside an eductor. The fluid used in the experiments is water in two different phases: liquid and vapor, for primary and secondary flows, respectively. This study was conducted in an attempt to establish the suitability of an eductor as a combined vacuum generator and condenser for membrane desalination applications. The pressure and temperature measurements at critical points in the flow paths have been summarized to identify the influence of primary flow on secondary fluid saturation and condensation. In addition, the mechanism of phase change has been explained through the photography of fluid flow in a two-dimensional eductor. A consistent oscillation of the gas-liquid interface was observed during steady-state operations of the eductor. This work also contributes to the validation of future computational research. It will provide a baseline for computational thermal fluid analysis relat... [more]
Economic Crisis Impact Assessment and Risk Exposure Evaluation of Selected Energy Sector Companies from Bombay Stock Exchange
Małgorzata Tarczynska-Luniewska, Iwona Bak, Uma Shankar Singh, Guru Ashish Singh
February 24, 2023 (v1)
Keywords: BSE, COVID-19, economic crisis, Energy, risk exposure, Russia–Ukraine conflict, stock
The energy sector is one of the most important sectors as it is the producer and supplier of fuel to run other industries and economies. This research aims to present an intertwined structure of risk exposure measuring the performance of the S&P Bombay Stock Exchange (BSE) Energy Index and selected companies from the constituents while taking into account two scenarios of risk, namely the COVID-19 pandemic and the Russia−Ukraine conflict, in a manner appropriate for energy stock investors, energy companies, and the economy through hedging against investment risk, diversification in operations securing the continuation of energy production, and the risk of fluctuating prices in the energy market, respectively. The research problem is observed as the requirement to choose the representative stocks of the S&P (BSE) Energy Index to evaluate their situations during the period of the two crisis scenarios and to provide the current risk exposure to India’s energy sector. The methodological ap... [more]
Surveying Dewatered Areas in the Fish Spawning Sites during Short-Term Drawdown Operations: Case Study of a Large Hydropower Plant Reservoir in the Lowland Area, Lithuania
Linas Jurevičius, Petras Punys, Egidijus Kasiulis, Linas Šilinis
February 24, 2023 (v1)
Keywords: dewatering areas, drawdown operations, fish spawning sites, hydropower, large reservoir
This paper presents research on the dewatering areas during drawdown operations in the Kaunas Hydropower Plant (HPP) reservoir situated in the lowland area of Lithuania. It is a multipurpose reservoir primarily used for power generation by two large hydropower plants. Because of the HPP peaking operation and the reservoir morphology—a shallow, gently sloping littoral zone—significant dewatered areas can occur (during drawdown operations). This is especially dangerous during the fish spawning period. Therefore, reservoir operation rules are in force that limit operation of the HPPs and secure other reservoir stakeholder needs. There is a lack of knowledge about the fish spawning locations, how they are changing, and what areas are dewatered at different stages of HPP operation. This knowledge is crucial for decision making and efficient water resources management in order to increase power generation and protect the environment at the same time. A detailed survey of an area containing s... [more]
Electrothermal Multicriteria Comparative Analysis of Two Competitive Powertrains Applied to a Two Front Wheel Driven Electric Vehicle during Extreme Regenerative Braking Operations
Khaled Itani, Alexandre De Bernardinis
February 24, 2023 (v1)
Keywords: 3-level DC/DC converter, electric vehicle, electrothermal behavior, hybrid energy storage system, Z-source converter
The powertrain performance in an electric vehicle is fully dependent on the electrical and thermal constraints of the static converters ensuring the power transfer taking place between the energy storage systems and the electromechanical machines. These constraints depend on the architectures of the power converters, and their control strategies. Particularly, the maximal limits are reached in maneuvers such as hard regenerative braking circumstances. Indeed, braking recovery is a critical phase in the vehicle’s operation, and its duration and intensity may strongly impact the vehicle’s battery behavior or integrated hybrid storage system. The innovative objective of the paper is to propose an electrothermal multicriteria comparative study based on electrical and thermal criteria for two competitive powertrains. These semi-active power configurations (a 3-level DC/DC converter-based, and a Z-source converter-based) are implemented in a two-front wheel driven electric vehicle during ext... [more]
A Multidimensional Adaptive Entropy Cloud-Model-Based Evaluation Method for Grid-Related Actions
Xiaoling Chen, Weiwen Zhan, Xingrui Li, Jingkai Guo, Jianyou Zeng
February 24, 2023 (v1)
Keywords: action evaluation, cloud attention mechanism, cloud model, power grid training
Smart grid training system needs to evaluate actions during power grid operations in order to complete training for relevant personnel. The commonly used action evaluation methods are difficult for evaluating fine actions during power grid operations, and the evaluation results are subjective. The use of an effective method to evaluate the actions of the power grid operation is important for improving the smart grid training system, enhancing the skills of the trainers, and ensuring the personal safety of operators. This paper proposes a cloud attention mechanism and an evaluation method of grid-related actions based on a multidimensional adaptive entropy cloud model to complete the evaluation of fine actions in the grid’s operation process. Firstly, the OpenCV technique is used to obtain the data related to hand actions during grid operation and to extract the action features to complete the construction of multiscale date sets; then, the adaptive entropy weight matrix at different sc... [more]
Analysis of Non-Steady Queue-Length Distribution in a Finite-Buffer Model with Group Arrivals and Power Saving Mechanism with Setups
Wojciech M. Kempa, Dariusz Kurzyk
February 24, 2023 (v1)
Keywords: finite buffer, integral equations, queue-size distribution, setup time, transient state
In the manuscript, a probability distribution of the queue length is studied in a model with group Markov arrivals, arbitrarily distributed service times and finite waiting room. After the period of suspension of service due to lack of packets, each new busy period is preceded by a random setup time. Integral equations for time-dependent queue-length distribution are derived by identifying renewal moments in the operation of the system and by applying total probability law. The representation for the solution of the system is found in terms of Laplace transforms. Computational examples illustrating the impact of system parameters on the queue-length distribution are included.
Selected Issues Associated with the Operational and Power Supply Reliability of Fire Alarm Systems
Tomasz Klimczak, Jacek Paś, Stanisław Duer, Adam Rosiński, Patryk Wetoszka, Kamil Białek, Michał Mazur
February 24, 2023 (v1)
Keywords: fire alarm system, operation, power supply, reliability
The article reviews issues associated with the use of electronic fire alarm systems (FAS). They are operated in various environments and buildings with varying volumes. FAS have to function properly under different operating conditions associated with their operation, as well as power supply and information inflow. Due to their functions, i.e., ensuring the safety of people, vehicles, logistics bases, airports, etc., FAS have to exhibit an appropriately organized reliability structure associated with their implementation and power supply. Operational studies involving FAS operated in various facilities were conducted to this end. The authors determined damage and recovery time intensities. FAS reliability indicators were also determined. The article presents graphs associated with developing the energy balance for selected FAS. The graphs are consistent with the latest and applicable legal regulations. The next stage of the work related to this article was developing an FAS operation p... [more]
Showing records 451 to 475 of 716. [First] Page: 15 16 17 18 19 20 21 22 23 Last
(0.04 seconds)
[Show All Subjects]

[0.16 s]