The current world geopolitical state has driven significant interest in expanding influence in the polar regions. In order to develop new trade routes and defense of these areas, specialized ice-capable vessels are needed. Traditional propulsion technology utilized for these vessels has featured diesel and turbo electric drives with cycloconverter based technology used for speed regulation. Cycloconverter technology has the major disadvantage of characteristic output voltage waveforms that are very non-sinusoidal which induce harmonic rich currents with their resulting negative effects on total power factor and efficiency. There is also the potential to induce harmonic currents that may increase heat production in power cables, stressing insulation and reducing overall component life. Furthermore, sensitive loads such as control system power supplies may also be affected. The output waveform of a PWM drive has harmonic content that is both less severe, and more easily analyzed with cur... [more]

In this paper, we propose a method to reduce the leakage magnetic field from wireless power transfer (WPT) systems with series−series compensation topology by adjusting the phase difference between the transmitter (TX) coil current and the receiver (RX) coil current without additional shielding coils or materials. A WPT system employing the proposed method adjusts the phase difference between the TX coil current and RX coil current by tuning a resonant capacitor of the RX coil. The conditions for minimizing the leakage magnetic field are derived, and the range of the resonant capacitor of RX, considering power transfer efficiency and the leakage magnetic field, is proposed. Through simulations and experiments, it is verified that the proposed method can reduce the leakage magnetic field level without any additional materials. For that reason, the proposed method can be suitable for size-limited, weight-limited or cost-limited WPT systems.

Multi-phase motors have recently replaced three-phase induction motors in a variety of applications due to the numerous benefits they provide, and the absence of speed sensors promotes induction motors with variable speed drives. Sensorless speed control minimizes unnecessary speed encoder cost, reduces maintenance, and improves the motor drive’s reliability. The performance comparison of the fuzzy sliding mode controller (FSMC) with adaptive fuzzy proportional integral derivative (AFPID) control methods for sensorless speed control of six-phase induction motors was analyzed in this study, and the proposed control system has an advantage for multiphase machines, specifically six-phase induction motors (IMs) in this study, as they are the current active research area for electric vehicles, hybrid electric vehicles, aerospace, ship propulsion, and high-power applications. The speed control of a six-phase induction motor was performed by using an AFPID controller and FSMC. The comparative... [more]

Recently, as interest in eco-friendly distributed power has increased, studies on the improvement of the performance of breakers such as DC breakers and on the reliability of existing AC breakers have been actively conducted. To improve the performance and reliability of these breakers, this paper conducted the analysis of characteristics of a low voltage circuit breaker using an external magnetic field. In this experiment, before the current-zero point, the cut-off time to improve the breaker performance is shortened and after the current-zero point, re-ignition, which is associated with reliability, is suppressed. According to the experimental results, the short-circuit characteristics before current-zero show a significant difference of 0.13 ms in the t21 section, and the dielectric recovery strength after current-zero shows a 13.3% performance improvement in the latter half of the DRV (dielectric recovery voltage) V-t curve. This result has significant meaning because it can be eas... [more]

The paper proposes a power flow control strategy for a P2 parallel plug-in hybrid electric vehicle (PHEV) which takes into account torque and power losses related to engine-on and gear shift transients. An extended backward-looking (EXT-BWD) model is proposed to account for the transient losses, while the control strategy combines a rule-based controller with an equivalent consumption minimization strategy. To describe the transient losses, the EXT-BWD model includes additional state variables related to engine on/off flag and gear ratio in the previous time step. To establish a performance benchmark for control strategy verification, a dynamic programming-based control variable optimization framework is established based on the EXT-BWD model. The proposed control strategy is demonstrated to improve the fuel efficiency and drivability compared to the original control strategy while retaining comparable computational efficiency.

Waste heat recovery was considered as a promising candidate for energy conservation and emission reduction. Methanol steam reforming was considered to be an effective means for hydrogen production because of its advantages. In this work, a micro reactor was constructed and thermoelectric generation coupled with hydrogen production from methanol steam reforming was innovatively used to recycle waste heat, which was simulated by hot air from a hot air gun. The waste heat was converted into electricity and hydrogen at the same time. The characteristic of thermoelectric generation coupled with methanol steam reforming was investigated. It was experimentally verified that both the hydrogen production rate and methanol conversion increased with the increasing inlet temperature, but thermal efficiency increased firstly and then decreased with the increasing temperature. The methanol steam reforming could effectively maintain cold side temperature distribution of thermoelectric generation. In... [more]

The paper introduces new techniques to reduce the potential for pole-slipping induced by control systems and presents a low-cost pole-slipping detection and recovery scheme for magnetic drive-trains (MDTs). For the first time, the paper shows that a combination of electromagnetic and load-torque excitations which individually are not greater than the maximum coupling torque can initiate pole-slipping. For applications where acceleration feedback is unavailable, the motor-side inertia is virtually increased with a tracking differentiator to provide feedback of acceleration. Subsequently, controller design and parameter optimization are discussed. Experimental measurements on a custom test facility verify the presented principles that low-bandwidth controller designs with low inertia ratios can accommodate a wider range of on-load startup torque and load-torque disturbances without pole-slipping. To address overload issues, a pole-slipping detection method based on the kurtosis of electr... [more]

Multi-energy complementary heating (MECH) is the most promising and potential heating technology of the future. However, owing to the increase in energy types, the system is complex, and the operation procedure cumbersome. In addition, due to the uncertainty of climate conditions, it is difficult to develop a general control strategy suitable for all heating systems. In order to study the optimal control strategy of MECH systems with solar, biomass, and electric energy as three heat sources in cold regions, the system heating was tested over different periods during the entire heating season for rural residential buildings in cold regions, and the operating performance of the system was evaluated. The MECH experiment, based on the optimal control strategy, was compared with other different heating systems, and the economic and environmental benefits of the system were further evaluated. The results showed that, compared with room temperature control strategy (RS-CON), the control strat... [more]

A compact, rapid, and portable off-chip pneumatic control valve is significant for the miniaturization and integration of external pneumatic systems for microfluidic chips. In this work, an off-chip microvalve with a high-speed electromagnetic switch actuator and a polydimethylsiloxane (PDMS) material valve body has been designed to be easily encapsulated, simulated using MATLAB/Simulink software, and tested in a micromixer. Multi-physical coupling mathematical models are developed based on the elastic deformation force of the valve membrane, the driving force of the valve core, and the fluid force in the microchannel. Two single microvalves are used to form a three-way microvalve, which can control the air pressure in a pneumatic microchannel on the microfluidic chip. The relationship between the flow−duty cycle, the flow−pressure difference of the single electromagnetic microvalve, and the load pressure of the three-way microvalve is simulated and analyzed. Sample mixing performance... [more]

The traditional Fixed Band Hysteresis Current Control (FB-HCC) though being widely used for the current control of grid integrated voltage source inverter (GI-VSI), has the drawback of variable switching frequency. To overcome this drawback, Complex Programmable Logic Device (CPLD) based switching scheme is proposed in this paper. The proposed method calls for a single reference wave and the control concept is to terminate the rising and falling inductor current (iL) either by the comparator or by the CPLD, based on the nature of its slope. Termination of the iL with steeper slope by the comparator ensures lower current ripple, whereas the CPLD ensures constant switching frequency (fsw). However, the iL obtained with the proposed logic has a DC offset, which is corrected by modifying the reference. The basic concept, switching logic, and reference correction are thoroughly detailed. MATLAB/Simulink results are included to verify the proposed concept. The constant frequency operation of... [more]

The efficiency problem of hydraulic pump units with advanced double structures with constant pressure regulators with different linear characteristics in the case of work in an open supply system is presented in the paper. The main parts of the hydraulic power pack structure and pressure controller functions are described. The equation is given for the calculation of energy losses in particular pumps and the whole multi-pump power pack unit. The difference between the efficiency of particular pumps and the hydraulic pump unit was discussed.

For the management of fractured large pores in high-water-bearing reservoirs, the general approach is to use transfer dissection and sealing. Conventional regulators have a limited regulating radius and can only produce blocking in the near-well zone, which is not ideal. Deep dissection technology can expand the radius of action and substantially improve the blocking effect. The existing deep-dissection agent system has problems such as high cost and poor effect, which affect its large-scale application. In this paper, to address these problems, a gel-type dissection modifier cross-linking agent was synthesized and optimized in the laboratory using low-concentration polymer, and the factors affecting the final gel formation effect were experimentally studied. The final polymer concentration was chosen to be 1500 mg/L~3000 mg/L, the poly-crossing ratio was 30:1, the pH was controlled at 7−9, and the temperature was controlled at 30−60 °C; the rubber was formed with good shear resistance... [more]

An optimal tilt-angle control based on artificial intelligence (AI control) for tracking bifacial photovoltaic (BPV) systems is developed in this study, and its effectiveness and characteristics are examined by simulating a virtual system over five years. Using deep reinforcement learning (deep RL), the algorithm autonomously learns the control strategy in real time from when the system starts to operate. Even with limited deep RL input variables, such as global horizontal irradiance, time, tilt angle, and power, the proposed AI control successfully learns and achieves a 4.0−9.2% higher electrical-energy yield in high-albedo cases (0.5 and 0.8) as compared to traditional sun-tracking control; however, the energy yield of AI control is slightly lower in low-albedo cases (0.2). AI control also demonstrates a superior performance when there are seasonal changes in albedo. Moreover, AI control is robust against long-term system degradation by manipulating the database used for reward setti... [more]

Cloud computing provides a ubiquitous data storage and access mechanism for organizations, industries, and smart grids to facilitate their operations. However, the concern in cloud storage systems is to secure data access control toward authentication for sensitive data, such as the electric vehicles (EVs) requesting information for attending a charging service. Consequently, denying an authentic user’s request will result in delaying the requested service, thereby leading to service inefficiency. The role-based access control (RBAC) plays a crucial role in securing and authenticating such time-sensitive data. The design mechanism of roles is based on skills, authority, and responsibilities for organizations. For EVs, the roles are based on the type of membership, such as permanent, occasional, or one-time. In this paper, we propose a new RBAC access control and privacy-preserving information access method toward the coarse-grained measure control and privacy protection in the cloud st... [more]

Investigation is devoted to the optimization of light spectrum and intensity used for red mustard growing. Notably, most of the studies devoted to red mustard growing were conducted on micro-greens, which is not enough for the development of methods and recommendations for making the right choices about the irradiation parameters for full-cycle cultivation. In this study, we tested four models of LED with different ratios of blue, green red and far red radiation intensity: 12:20:63:5; 15:30:49:6; 30:1:68:1, in two values of photon flux density (PFD)—120 and 180 µmol m−2 s−1—to determine the most effective combination for red mustard growing. The study was conducted in a container-type climate chamber, where the red leaf mustard was cultivated in hydroponics. On the 30th day of cultivation, the plant’s morphological, biochemical and chlorophyll fluorescence parameters, and reflection coefficients were recorded. The results indicated that the PFD 120 µmol m−2 s−1 had a worse effect on bo... [more]

In this article, a dual-stage proportional integral−proportional derivative with filter (PI−PDF) controller has been proposed for a hybrid two-area power system model having thermal-, hydro-, gas-, wind-, and solar-based power generating sources. Superconductor magnetic energy storage (SMES) units to cope with the transient power deviations have been incorporated in both areas. Governor dead-band (GDB) is considered in the governor model of thermal, and a generation rate constraint (GRC) is considered in the thermal and hydro turbine models to analyze the impact of system nonlinearity. The parameters of the proposed control strategy are optimally tuned by deploying a newly developed bull−lion optimization (BLO) to maintain optimal frequency and power response during system load deviations. Variations in wind speed and PV solar irradiance data have been included to examine the effectiveness of the BLO-based PI−PDF controller with system uncertainties and variability of renewable energy... [more]

The power system of wind farms is generally characterized by a weak grid, in which voltages may be heavily distorted and imbalanced, challenging the control scheme of wind-power converters that must be impervious to such disturbances. The control scheme in the stationary natural abc-frame has shown good performance under non-ideal voltage conditions, and then this paper proposes to analyze the operational performance of a wind-power system based on a permanent magnet synchronous generator subject to non-ideal conditions of the grid voltage, with its control scheme devised in the abc-reference frame. The proposed control scheme considers the torque control decoupling the flux and torque for the generator-side, showing the possibility to implement the machine torque control, without any coordinates transformation using a closed loop dot-product approach, between the field flux and stator currents. For the grid-side converter, the load current compensation is proposed, using the load curr... [more]

Aiming at the problem of unbalanced data categories of UHV converter valve fault data, a method for UHV converter valve fault detection based on optimization cost-sensitive extreme random forest is proposed. The misclassification cost gain is integrated into the extreme random forest decision tree as a splitting index, and the inertia weight and learning factor are improved to construct an improved particle swarm optimization algorithm. First, feature extraction and data cleaning are carried out to solve the problems of local data loss, large computational load, and low real-time performance of the model. Then, the classifier training based on the optimization cost-sensitive extreme random forest is used to construct a fault detection model, and the improved particle swarm optimization algorithm is used to output the optimal model parameters, achieving fast response of the model and high classification accuracy, good robustness, and generalization under unbalanced data. Finally, in ord... [more]

The injecting drilling mud is typically at the ambient temperature, relatively much colder than the deep formation, inducing a cooling effect in the formation. Although the cooled formation temperature gradually returns to its original temperature after drilling circulation, the recovery speed is slow due to low thermal diffusivity. Considering that any well tests begin in a short period after drilling ends, temperature recovery is not fully achieved before the tests. It means that the measured temperature of producing fluid is not that of the actual formation, significantly impairing the robustness of the subsequent thermal applications. Furthermore, there has been no quantified concept of thermal disturbance in the formation and its analysis. In this work, a proposed numerical transient heat transfer model computes the radial temperature in the drill pipe, annulus, and formation. The concept of quantifying thermal disturbance, named thermally disturbed radius (TDR), indicates how lon... [more]

With the large-scale distributed PV connected to the grid, the random and intermittent nature of PV output, the non-linearity of the inverter, as well as the low daytime base-load and large-scale back feeding cause outstanding power quality problems such as overvoltage, three-phase unbalance, and high harmonic content at the end of the power supply system, which seriously affects the safe and stable operation of the grid and power efficiency. Based on the residual capacity of the inverter, this paper investigates a cooperative power quality control strategy that integrates active power filter, reactive power compensation, and inverter functions to achieve comprehensive power quality control and management without adding additional hardware equipment. The validation results show that the control strategy strongly improves the power quality, grid security, stability, and efficiency. This strategy indicates significant economic benefits.

The main advantages of multi-winding (multiphase) induction machines include reducing torque ripple, decreasing rotor harmonics losses, reducing the current per phase without increasing the voltage per phase, reducing the current harmonics of the DC voltage source, and high fault tolerance. The authors propose a theoretical description for the harmonic content of the DC-link current, magnetomotive force, and electromagnetic torque of a multi-winding induction machine (IM), and an account of the interaction of the time harmonics for the power supply and the spatial harmonics for winding functions is presented. The proposed theoretical analysis has made it possible to substantiate supply-winding schemes for the compensation of higher harmonics (6th and 12th in the DC-link current and the IM’s electromagnetic torque) and the improvement of the electromagnetic and electromechanical compatibility of the multi-winding machine, which are justified according to the proposed theoretical descrip... [more]

High voltage direct current (HVDC) transmission systems play a critical role to optimize resource allocation and stabilize power grid operation in the current power grid thanks to their asynchronous networking and large transmission capacity. To ensure the operation reliability of the power grid and reduce the outage time, it is imperative to realize fault diagnosis of HVDC transmission systems in a short time. Based on the prior research on fault diagnosis methods of HVDC systems, this work comprehensively summarizes and analyzes the existing fault diagnosis methods from three different angles: fault type, fault influence, and fault diagnosis. Meanwhile, with the construction of the digital power grid system, the type, quantity, and complexity of power equipment have considerably increased, thus, traditional fault diagnosis methods can basically no longer meet the development needs of the new power system. Artificial intelligence (AI) techniques can effectively simplify solutions’ com... [more]

In this paper, the method and a control algorithm for detecting resonant destruction of a resonant auxiliary power supply for railway vehicle are proposed. It is essential to reduce the weight of the electric equipment attached to the lower part of the railway vehicle because it greatly affects the life of the railway vehicle, such as wheel and bearing. In order to reduce the weight and volume of the auxiliary power supply, in the case of windings, high-speed switching should be performed by lowering the input voltage. Therefore, in this paper, the auxiliary power supply control algorithm using an LLC resonant converter to reduce the weight of auxiliary power supply for railway vehicle is proposed, and the method of detecting resonant destruction due to device failure of a resonant converter is proposed. The proposed algorithm steps down the wire voltage using an input buck converter for high-speed switching, and the inverter input voltage is controlled through the LLC resonant convert... [more]

The second-order sliding mode control has strong robustness. Its application has greatly improved the anti-jamming ability of permanent magnet synchronous motor(PMSM) speed control systems. However, the influence of noise is unavoidable due to the introduction of a differentiator in the second-order sliding mode control, and the steady-state performance of the system is poor due to the absence of a q-axis current loop. This paper proposes a second-order sliding mode control method based on singular perturbation, which decouples the PMSM speed control system into two subsystems, the slow subsystem, including the speed variable, adopts second-order sliding mode control, and the fast subsystem, including the current variable of q-axis, adopts linear control. The design of a sliding surface for the slow subsystem avoids the application of the differentiator, which reduces the chattering better. Besides this, the steady-state performance of the system is improved due to the introduction of... [more]

The rapid growth in renewable energies has given rise to their integration into the grid system. These renewable and clean energy sources are dependent on external conditions such as wind speed, solar irradiation, and temperature. For a stable connection between these sources and power grid systems, a controller is necessary to regulate the system’s closed-loop dynamic behavior. A sliding mode control (SMC) using a new reaching law is proposed for the integration of a Modified Capacitor-Assisted Extended Boost (MCAEB) quasi-Z Source 7 level 18 switch inverter with the grid. An SMC-based controller was implemented to regulate the current flow between the inverter and the grid. SMC has the advantages of ease of implementation, robustness, and invariance to disturbance. The simulation results of SMC and the proportional integral (PI) controller are compared in terms of settling time, steady-state error, and total harmonic distortion (THD) during transient response, steady-state response a... [more]