Perovskite solar cells (PSCs) have captured the attention of the global energy research community in recent years by showing an exponential augmentation in their performance and stability. The supremacy of the light-harvesting efficiency and wider band gap of perovskite sensitizers have led to these devices being compared with the most outstanding rival silicon-based solar cells. Nevertheless, there are some issues such as their poor lifetime stability, considerable J−V hysteresis, and the toxicity of the conventional constituent materials which restrict their prevalence in the marketplace. The poor stability of PSCs with regard to humidity, UV radiation, oxygen and heat especially limits their industrial application. This review focuses on the in-depth studies of different direct and indirect parameters of PSC device instability. The mechanism for device degradation for several parameters and the complementary materials showing promising results are systematically analyzed. The main o... [more]

After long-term polymer flooding, water channeling, and ineffective water circulation occur in oil wells, which seriously affect polymer flooding efficiency and oilfield recovery. The weak gel system has the property of delaying cross-linking. After the weak gel system enters the deep formation, the cross-linking reaction is carried out, which can achieve the purpose of deep regulation and flooding. In this paper, according to the formation characteristics of high temperature, high permeability, and large pores in Y1 block (a block in the Daqing Yushulin Oilfield), the formulation of weak gel system was developed. The optimal formulation was determined by parameters such as gel-forming properties, stability, viscoelasticity, and rheology. Finally, the best formulation for the Y1 block is that containing 0.22% of polyacrylamide (HPAM) and 0.15% of chromium (III) acetate system. The gel-forming time of the formulation is 8 h, and the viscosity can be maintained at 15,000−24,000 mPa·s. Ne... [more]

This paper presents the results of comprehensive numerical analyses in the performance of a packed-bed latent heat storage (PBLHS) system in terms of key performance indicators, namely charging time, charging rate, charging capacity, and charging efficiency. Numerical simulations are performed for the packed bed region using a transient two-dimensional axisymmetric model based on the local thermal non-equilibrium (LTNE) approach. The model considers the variation in the inlet temperature of the system as these storage systems are typically integrated with solar collectors that operate with intermittent solar radiation intensity. The model results are validated using the experimental data for temperature distribution throughout the bed. The simulations are carried out while changing the operating parameters such as the capsule diameter, bed porosity, inlet velocity, and the height-to-diameter aspect ratio to investigate their impact on the performance indicators. Observations indicate t... [more]

The adsorption mechanism of Cd2+ on different cleavage planes of montmorillonite was investigated using density functional theory (DFT) calculations and molecular dynamics (MD) simulations. The most stable adsorption energies of Cd2+ on the (001) and (010) surfaces were −88.74 kJ/mol and −283.55 kJ/mol, respectively. On the (001) surface, Cd2+ was adsorbed on the centre of the silicon−oxygen ring by electrostatic interactions, whereas on the (010) surface, Cd2+ was adsorbed between two ≡Al−OH groups and formed two covalent bonds with O, which was mainly due to the interaction between the Cd s and O p orbitals. Upon the partial substitution of Na+ by Cd2+, Cd2+ was adsorbed on the (001) surface as inner-sphere surface complexes, with a hydration number of 5.01 and a diffusion coefficient of 0 m2/s. Whereas, when Cd2+ completely replaced Na+, part of the Cd2+ moved from the inner-sphere surface complexes to the outer-sphere surface complexes owing to its competitive adsorption. In this c... [more]

This study aimed to explore the enzymatic acylation of dihydromyricetin (DHM) to synthesized DHM derivatives with a different substituted carbon chain to improve its liposolubility. In the presence of Lipozyme TL IM, DHM was butyrylated in a 96.28% conversion in methyl tert-butyl ether under the optimized conditions (molar ratio of DHM to vinyl butyrate, 1:20; lipase dosage, 0.4 U/mg DHM; temperature, 50 °C; stirrer speed, 200 rpm; reaction time, 72 h). Liquid chromatography-mass spectrometry (LC-MS) and nuclear magnetic resonance (NMR) spectroscopy revealed that two acylation products were formed; these were 7-O-acyl-DHM and 3-O-acyl-DHM. In addition, the liposolubility of the DHM derivatives increased with the increase in the substituted carbon chain length; their antioxidant activities were higher than that of DHM in the lecithin peroxidation system, and C8-DHM had a better effect. Therefore, enzymatic acylation broadens the application of DHM in a lipid system in the food field.

This study investigates applying the principles of the long-discontinued Pedersen process as a possible route for producing metallurgical grade alumina from low-grade and secondary feed materials. The investigation focused on the hydrometallurgical steps in the process, namely leaching, desilication, and precipitation, and adapting it to valorize bauxite residue. The test material used was a calcium−aluminate slag made by the smelting-reduction of a mixture of bauxite residue (dewatered red mud) and a calcium-rich bauxite beneficiation by-product. Samples of the slag were leached in a 1 L jacketed glass reactor with Na2CO3 solution, varying Na2CO3 concentration and leaching time. Additionally, different approaches to leaching involving mechanical treatment of the leached slag and re-leaching using either fresh or recycled solution were also explored. The desilication step was carried out by treating the leachate solution with powdered CaO, varying the amounts of CaO used. Finally, the... [more]

Potassium thiocyanate (KSCN), a highly efficient “three birds with one stone” activator, might work with inorganic activators to produce excellent N/S co-doped porous carbon (NSC) materials for environmental remediation. However, the effects of inorganic activators on cooperative activation are unclear. As a result, the influence of inorganic activators on the synthesis of NSC materials was investigated further. This study shows that the surface areas of the NSC materials acquired through cooperative activation by potassium salts (KOH or K2CO3) were considerably higher than those acquired through KSCN activation alone (1403 m2/g). Furthermore, KSCN could cooperate with K2CO3 to prepare samples with excellent specific surface area (2900 m2/g) or N/S content. The as-prepared NSC materials demonstrated higher adsorption capability for chloramphenicol (833 mg/g) and Pb2+ (303 mg/g) (pore fitting, complexation). The research provides critical insights into the one-step synthesis of NSC mate... [more]

Co-doped Fe-MOF bimetallic organic framework materials at different ratios were synthesized based on the solvothermal method, and we evaluated their morphological characteristics by modern analytical methods such as SEM, XRD, FT-IR, and isotherm of nitrogen adsorption-desorption (BET). The specific surface area of the 0.3 CoFe-MOF sample (280.9 m2/g) is much larger than the Fe-MOF and samples at other ratios. The post-synthesized materials were evaluated for their ability to absorb various dyes, including Methylene Blue (MB), Methyl orange (MO), Congo red (CR), and Rhodamine (RhB), and evaluated for the effects of pH, the initial concentration of the dye solution, time, and dose of adsorbent. The results show that the 0.3 CoFe-MOF material has a high adsorption capacity that is superior to both the original Fe-MOF and the CoFe-MOFs at other ratios. The highest adsorption capacity of MB dye by 0.3 CoFe-MOF reaches up to 562.1 mg/g at pH 10, the initial concentration of MB of 200 mg/L, a... [more]

In this study, a V2O5-Sb2O3/TiO2 monolithic catalyst was modified by introducing WO3. The WO3-modified catalyst exhibited enhanced catalytic activity in the measuring temperature range of 175−320 °C. The changes in dispersion of vanadia species were investigated by ultraviolet-visible (UV-Vis) spectroscopy and H2 temperature-programmed reduction (H2-TPR). A durability test was conducted in a wet SO2-containing atmosphere at 220 °C for 25 h. The sulfate deposition was estimated by temperature-programmed decomposition (TPDC) of sulfates, thermo-gravimetric (TG) analysis, and temperature-programmed desorption (TPD) of NH3. Isothermal SO2 oxidation and temperature-programmed surface reaction (TPSR) of NH4HSO4 with NO were performed. Based on these characterizations, effects of WO3 modification on the sulfate tolerance of the catalyst were explored.

As the utilization of zeolites has become more frequent in the dry reforming of methane (DRM) reaction, more systematic studies are required to evaluate properly the influence of zeolites’ composition and framework type on the performance. Therefore, in this work, a step-by-step study was performed with the aim of analyzing the effects of Ni loading (5, 10 or 15 wt.% over USY(3) zeolite), Si/Al ratio (3, 15 or 38 on USY zeolites with 15 wt.% Ni) and framework type (USY, BEA, ZSM-5 or MOR for 15 wt.% Ni and Si/Al ratios of ≈40) on catalysts’ properties and performances. Increasing Ni loadings enhanced CH4 and CO2 conversions even though the catalysts’ stability was decreasing over the time. The variation of the Si/Al ratio on USY and the use of different zeolites had also a remarkable impact on the catalytic performance. For instance, at 500−600 °C reaction temperatures, the catalysts with higher basicity and reducibility exhibited the best results. However, when the temperature was fur... [more]

Olaparib (OLP) is an orally active poly (ADP-ribose) polymerase enzyme inhibitor, approved for treatment for the metastatic stage of prostate, pancreatic, breast and ovarian cancer. Due to its low bioavailability, an increase in dose and frequency is required to achieve therapeutic benefits, which also results in associated toxicity in patients. In the current study, OLP-loaded poly (d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) (OLP-PLGA NPs) and a coating of OLP-PLGA NPs with chitosan (CS) (OLP-CS-PLGA NPs) were prepared successfully in order to improve the dissolution rate and bioavailability. The developed OLP-PLGA NPs were evaluated for hydrodynamic particle size (392 ± 5.3 nm), PDI (0.360 ± 0.03), ZP (−26.9 ± 2.1 mV), EE (71.39 ± 5.5%) and DL (14.86 ± 1.4%), and OLP-CS-PLGA NPs, hydrodynamic particle size (622 ± 9.5 nm), PDI (0.321 ± 0.02), ZP (+36.0 ± 1.7 mV), EE (84.78 ± 6.3%) and DL (11.05 ± 2.6%). The in vitro release profile of both developed NPs showed a sustained re... [more]

Pore structure is the key factor affecting reservoir accumulation and enrichment behavior. Due to the complex mineral components and pore structure of shale oil reservoirs and strong heterogeneity, it is necessary to explore the micro-pore structure characteristics of inter-salt shale. In this study, in order to qualitatively and quantitatively analyze the pore structure of inter-salt shale reservoirs, as well as evaluate the mineral composition and its spatial distribution characteristics, three shale samples from the 10th cyclothem of the Eq3 (Eq34−10 cyclothem) inter-salt shale were selected to acquire 2D and 3D grayscale images by modular automated processing system (MAPS) and X-ray micro-computed tomography (Micro-CT), respectively. The color map of the inlaid characteristics of mineral aggregates was established by Quantitative Evaluation of Minerals by Scanning Electron Microscopy (QEMSCAN), and different mineral types in the grayscale image were determined. After that, the digi... [more]

Due to its high hardness and high transmittance, ultra-white glass has a strong application prospect in the fields of optoelectronics industry and experimental instruments. However, because of its brittleness, it was still a difficult problem in the machining industry. Surface modification provides a basic research idea for ultra-white glass microstructure processing. An effective method to obtain surface modified area on ultra-white glass was presented. The modified zone on the surface of ultra-white glass was induced by the technique of coating and femtosecond laser-assisted chemical etching. The method combines vacuum coating with femtosecond laser irradiation. Next, the modified glass was processed with highly selective potassium hydroxide solution. In order to control the surface size more efficiently, the optimization experiment of laser parameters and chemical parameters on the machining process was carried out. The experimental results show that the method made the surface modi... [more]

Biofilters (BFs) and biotrickling filters (BTFs) are two types of bioreactors used for treatment of volatile organic compounds (VOCs). Both BFs and BTFs use packing materials in which various microorganisms are immobilised. The water phase in BFs is stationary and used to maintain the humidity of packing materials, while BTFs have a mobile liquid phase. Optimisation of irrigation of packing materials is crucial for effective performance of BFs and BTFs. A literature review is presented on the influence of water content of packing materials on the biofiltration efficiency of various pollutants. Different configurations of BFs and BTFs and their influence on moisture distribution in packing materials were discussed. The review also presents various packing materials and their irrigation control strategies applied in recent biofiltration studies. The sources of this review included recent research articles from scientific journals and several review articles discussing BFs and BTFs.

In this review article, the state of the art of the complete processing chain in the production of solar photo-electric modules from raw materials (quartzites, quartz sand) is detailed. In particular, the silicon and silane production technologies of the Institute of Physics and Technology of Almaty, Kazakhstan, can become part of an expansive technologies chain. Such integration could present a number of benefits in comparison with the analogs, including less environmental pressure and increased safety. The combination of innovative production technologies of highly effective solar cells and modules with competitive production technologies of solar-grade silicon and silane constitutes a basis for the creation of an industrial cluster in the field of silicon solar photo energy with a complete vertically integrated production cycle.

3-hydroxybutyraldehyde (3-HBA) is mainly employed to synthesize 1,3-BDO (1,3-butanediol), which is one of the most important components in cosmetics moisturizers. In this study, a series of composite oxide catalysts were prepared by bringing alkaline earth metal Ca and rare earth metal La to the composite oxide MgO/Al2O3, which were made through the co-precipitation method. These catalysts were applied in the synthesis of 3-HBA through acetaldehyde (AcH) condensation. The structure, texture, and acidic properties of these catalysts were characterized using various characterization methods, and the effects of catalyst composition, reaction temperature, reaction pressure, and residence time on the conversion of AcH were investigated as well. The results showed that the introduction of Ca and La weakened the acidic property and enhanced the basic property, which favored the AcH condensation to synthesize 3-HBA. At a temperature of 20 °C, pressure of 200 kPa, and residence time of 70 min,... [more]

In this work, a method to predict the surface structures of particles produced by fluidized bed spray layering granulation using the CFD-DEM method was developed. A simple state-variable/event tracking approach was implemented to capture indirect quantifiers of the progression of structure-forming microprocesses. The state of the droplet at the time of impact on the particle surface, as well as the time required for drying, is correlated to product properties that quantify surface structure morphology such as roughness. A workflow for scale-up of fluidized bed granulation guided by product-property predictors is presented. The approach was tested on a demonstration case from the literature, where a particle core is coated with sodium benzoate solution. The experiment was scaled-up by a factor of eight to pilot-scale using the developed method. Varying the number of nozzles in use in the pilot-scale granulation affected the particle surface roughness due to the differing drying conditio... [more]

Green synthesis of zinc oxide nanoparticles (ZnO NPs) using plant extracts have recently attracted considerable attention due to their environmental protection benefits and their easy and low cost of fabrication. In the current study, ZnO NPS were synthesized using the aqueous extract of Ochradenus arabicus as a capping and reducing agent. The obtained ZnO NPs were firstly characterized using ultraviolet visible (UV-Vis) spectroscopy, Fourier transform infrared (FTIR), transmission electron microscope (TEM), X-ray diffraction (XRD), energy dispersive X-ray absorption (EDX), zeta potential, and zeta size. All these techniques confirmed the characteristic features of the biogenic synthesized ZnO NPs. Then, ZnO NPs were evaluated for their effects on morphological, biochemical, and physiological parameters of Salvia officinalis cultured in Murashige and Skoog medium containing 0, 75, 100, and 150 mM of NaCl. The results showed that ZnO NPs at a dose of 10 mg/L significantly increased the... [more]

This paper proposes a high-efficiency single-mode traveling wave reactor based on a rectangular waveguide and its design method for continuous flow processing. The reactor has a large-capacity reaction chamber (1000 mm × 742.8 mm × 120 mm) that can provide high-energy-efficiency and approximately uniform microwave heating. The microwave heating uniformity is improved by maintaining single-mode microwave transmission and eliminating higher-order modes in such a multi-mode reaction chamber. The high energy efficiency of microwave heating is achieved by adopting impedance matching techniques. The incident microwave in the reactor can remain in a traveling wave state, and the power reflection can be minimized. Several numerical simulations based on multi-physics modeling are conducted to investigate the heating uniformity, the energy efficiency and the flexibility under different operation conditions. The results show the microwave energy efficiency can be higher than 99%, and meanwhile, t... [more]

Aqueous solutions of glycerol are widely used as model fluids in flow phenomena experiments. The design of these experiments involves the description of the physical properties of liquids and the refractive index matching using a salt, i.e., calcium chloride. The first part of this paper describes the physical properties of aqueous solutions of glycerol. Refractive index, viscosity, and density were measured for a mass fraction of glycerol in a range from 0 to 1 and compared to the data in the literature. In the second part, calcium chloride was added to aqueous solutions of glycerol, and the variations of density, viscosity, and refractive index with the mass fraction of calcium chloride were reported, which is a new contribution to literature. The main novelties of this work are (1) the development and validation of a set of equations to predict the rheological and physical properties of model fluids for flow studies involving dissimilar fluids; (2) the introduction of an algorithm t... [more]

In this study, we rationally designed a facile stepwise route and successfully synthesized a Co(OH)2/Ni3S2 heterostructure supported on nickel foam (NF) as a binder-free electrode for energy storage. Galvanostatic deposition was first applied to produce uniform Co(OH)2 nanoflakes on NF. Then, Ni3S2 was applied to its surface by potentiostatic deposition to form a Co(OH)2/Ni3S2 heterostructure at room temperature. The added Co(OH)2 not only functions as a practical electrochemically active component but also provides support for the growth of Ni3S2, and the deposition amount of Ni3S2 is controlled by adjusting the electrodeposition duration of Ni3S2. Then, the electrochemical behaviors of the Co(OH)2/Ni3S2 composite can be optimized. A maximum areal specific capacitance (Cs) of 5.73 F cm−2 at 2 mA cm−2 was achieved, and the coulombic efficiency was as high as 94.14%. A capacitance retention of 84.38% was measured after 5000 charge−discharge cycles.

Determination of oxyanions is of paramount importance because of the essential role they play in metabolic processes involved in various aquatic environmental problems. In this investigation, a novel chemical sensor array has been developed by using gold nanoparticles modified with different chain lengths of aminothiols (AET-AuNPs) as sensing elements. The proposed sensor array provides a fingerprint-like response pattern originating from cross-reactive binding events and capable of targeting various anions, including the herbicide glyphosate. In addition, chemometric techniques, linear discrimination analysis (LDA) and the support vector machine (SVM) algorithm were employed for analyte classification and regression/prediction. The obtained sensor array demonstrates a remarkable ability to determine multiple oxyanions in both qualitative and quantitative analysis. The described methodology could be used as a simple, sensitive and fast routine analysis for oxyanions in both laboratory... [more]

Glycosides have been synthesized using the starting materials magnolol (1) and honokiol (4), isolated from the Japanese white-bark magnolia, and their anti-aging effects on the skin (skin-beautifying effects) have been examined. The advanced glycation end-product (AGE) inhibitory activity test (anti-glycation test) and glycation induction model test, using human-derived dermal fibroblasts, TIG-110 cells, have been conducted to evaluate the anti-aging effects. The synthesized glycoside compounds, 5,5′-di(prop-2-en-1-yl)[1,1′-biphenyl]-2-hydroxy-2′-glucopyranoside (3a), 5,5′-di(prop-2-en-1-yl)[1,1′-biphenyl]-2,2′-diglucopyranoside (3b), 3′,5-di(prop-2-en-1-yl)[1,1′-biphenyl]-4′-hydroxy-2-glucopyranoside (6a) and 3′,5-di(prop-2-en-1-yl)[1,1′-biphenyl]-2,4′-diglucopyranoside (6b), have shown significant anti-glycation activities of less than 0.10 mM in IC50. The glycation induction model test with the fibroblasts, TIG-110 cells, demonstrates that the aforementioned glycosides significantly... [more]

In this study, we reported a rapid, sensitive, robust, and validated method for atenolol quantification in dried plasma spots (DPS) by liquid chromatography with high-resolution mass spectrometry (LC-HRMS) using parallel reaction monitoring mode (PRM). Aliquots of 25 µL human plasma were placed onto Whatman 903 Cards and air-dried. Disks (3.2 mm internal diameter) were punched, and a 100 µL working internal standard solution was added to each sample and then incubated on a shaker for 15 min at 40 °C, followed by rapid centrifugation (10,000× g, 10 s). The supernatant was transferred into 300 µL vials for subsequent LC−HRMS analysis. After chromatographic separation, atenolol and the internal standard were quantified in positive-ion parallel reaction monitoring mode by detection of all target product ions at 10 ppm tolerances. The total time of the analysis was 5 min. The calibration curve was linear in the range of 5−1000 ng/mL with interday and intraday precision levels and biases of... [more]

Produced water contaminated with oil has adverse effects on human health and aquatic life. Providing an efficient method for the removal of oil from produced water is a challenging task. In this study, the effects of carbon chain length and the cation nature of ionic liquids (ILs) on the removal efficiency of oil from produced water were investigated. For this purpose, seven ILs containing the bis (trifluoromethylsulfonyl) imide (NTf2) anion, and various cations such as imidazolium, pyridinium, phosphonium, and ammonium, were employed for the removal of oil from produced water via liquid−liquid extraction. The effects of process parameters such as the initial concentration of oil in produced water, contact time, pH, salinity, phase ratio, and temperature on the removal efficiency of oil were studied and optimized. 1-Decyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ([C10mim][NTf2]) (IL4) was found to give the highest oil extraction efficiency of 92.8% under optimum condition... [more]