The efficient and timely removal of organic matter and nutrients from water used in normal municipal functions is considered to be the main task of wastewater treatment plants (WWTPs). Therefore, these facilities are considered to be essential units that are required to avoid pollution of the water environment and decrease the possibility of triggering eutrophication. Even though these benefits are undeniable, they remain at odds with the high energy demand of wastewater treatment and sludge processes. As a consequence, WWTPs have various environmental impacts, which can be estimated and categorized using Life Cycle Assessment (LCA) analysis. In this study, a municipal WWTP based in Poznań, Poland, was examined using the method defined in ISO 14040. ReCiPe Endpoint and Midpoint (v1.11), in a hierarchical approach, were used to evaluate the environmental impacts regarding 18 different categories. All calculations were conducted using a detailed database from 2019, which describes each c... [more]

Circular economy is emerging as a regenerative concept that minimizes emissions, relies on renewable energy, and eliminates waste based on the design of closed-loop systems and the reuse of materials and resources. The implementation of circular economy practices in resource-consuming agricultural systems is essential for reducing the environmental ramifications of the currently linear systems. As the renewable segment of circular economy, bioeconomy facilitates the production of renewable biological resources (i.e., biomass) that transform into nutrients, bio-based products, and bioenergy. The use of recycled agro-industrial wastewater in agricultural activities (e.g., irrigation) can further foster the circularity of the bio-based systems. In this context, this paper aims to provide a literature review in the field of circular economy for the agrifood sector to enhance resource efficiency by: (i) minimizing the use of natural resources (e.g., water, energy), (ii) decreasing the use o... [more]

The presence of dyes in aquatic environments can have harmful effects on aquatic life, including inhibiting photosynthesis, decreasing dissolved oxygen levels, and altering the behavior and reproductive patterns of aquatic organisms. In the initial phase of this review study, our aim was to examine the categories and properties of dyes as well as the impact of their toxicity on aquatic environments. Azo, phthalocyanine, and xanthene are among the most frequently utilized dyes, almost 70−80% of used dyes, in industrial processes and have been identified as some of the most commonly occurring dyes in water bodies. Apart from that, the toxicity effects of dyes on aquatic ecosystems were discussed. Toxicity testing relies heavily on two key measures: the LC50 (half-lethal concentration) and EC50 (half-maximal effective concentration). In a recent study, microalgae exposed to Congo Red displayed a minimum EC50 of 4.8 mg/L, while fish exposed to Disperse Yellow 7 exhibited a minimum LC50 of... [more]

Synthetic fibers enter wastewater treatment plants together with natural fibers, which may affect treatment efficiency, a fact not considered in previous studies. Therefore, the aim of the present study was to evaluate the efficiency of the coagulation/flocculation process for the removal of a mixture of textile fibers from different water matrices. Natural and synthetic fibers (100 mg/L; cotton, polyacrylonitrile, and polyamide) were added to a synthetic matrix, surface water and laundry wastewater and subjected to coagulation/flocculation experiments with ferric chloride (FeCl3) and polyaluminum chloride (PACl) under laboratory conditions. In the synthetic matrix, both coagulants were found to be effective, with FeCl3 having a lesser advantage, removing textile fibers almost completely from the water (up to 99% at a concentration of 3.94 mM). In surface water, all dosages had approximately similar high values, with the coagulant resulting in complete removal. In laundry effluent, the... [more]

Slags from the ferrous and nonferrous metallurgical industries have been used to treat toxic contaminants in water and wastewater. Using slag as a recycling or renewable resource rather than a waste product has environmental and economic benefits. Recycled smelter slags can be used in both in situ and ex situ treatment. However, their application has some limitations. One of the challenges is how to handle spent slag adsorbents, as they contain the accumulation of solid waste loaded with high concentrations of toxic contaminants. These challenges can be overcome by regeneration, recycling, reuse, and immobilization treatment of spent slag adsorbents. The present paper explored the scientific and technical information about the composition, reaction mechanisms, adsorption capacity, and opportunities of recycled slags while adsorbing toxic compounds from contaminated water. It comprehensively reviewed the current state of the art for using smelting slags as sustainable adsorbents for wat... [more]

Tequila vinasses is a mixture made from up to six still distillation two-stage process residual effluents. First stage fractions: residual must (60%), heads (0.9%) and tails (20.0%); second stage fractions: non-evaporated (8.0%), heads (0.1%) and tails (1.0%); the result is a more complex effluent for its treatment or biorefining. The objectives of this study were to: (a) characterize the five still distillation volatile streams in the Tequila 100% Agave processing; compounds: methanol, ethanol, acetaldehyde, ethyl acetate, sec-butanol, n-propanol, iso-butanol, n-butanol, iso-amyl, n-amyl, and ethyl lactate were detected by gas chromatography; calculated chemical oxygen demand from chemical composition had very high values (53,760−1,239,220 mg/L); measurement of pH (3.24−4.80), color (38.6 UC Pt-Co max), turbidity (46.1 max), electrical conductivity (3.30−172.20 μS/cm), and solid content (0 mg/L) was also made; (b) report an energy analysis (2.02 × 109 KWh) and CO2 production (429 × 10... [more]

Microalgae-based wastewater treatment plants are low-cost alternatives for recovering nutrients from contaminated effluents through microalgal biomass, which may be subsequently processed into valuable bioproducts and bioenergy. Anaerobic digestion for biogas and biomethane production is the most straightforward and applicable technology for bioenergy recovery. However, pretreatment techniques may be needed to enhance the anaerobic biodegradability of microalgae. To date, very few full-scale systems have been put through, due to acknowledged bottlenecks such as low biomass concentration after conventional harvesting and inefficient processing into valuable products. The aim of this study was to evaluate the anaerobic digestion of pretreated microalgal biomass in a demonstration-scale microalgae biorefinery, and to compare the results obtained with previous research conducted at lab-scale, in order to assess the scalability of this bioprocess. In the lab-scale experiments, real municipa... [more]

Global deposits of concentrated phosphates, which are a necessary source for the production of phosphate fertilizers, are limited. These reserves keep getting thinner, and every day, large amounts of phosphorus end up in watercourses. In this study, we verified that modified biochar (saturated with FeCl3 solution and then neutralized with NaOH solution) can adsorb significant amounts of phosphorus from wastewater. Moreover, the agrochemical qualities of sludge water from a municipal wastewater treatment plant, struvite, phosphorus-saturated biochar, and iron(III) phosphate from a reused biochar filter were tested in this study. We determined the amount of mobile phosphorus as well as the amount of extractable phosphorus and its five fractions. It was found that modified biochar can hold one-third of the phosphorus amount contained in the commonly used agricultural fertilizer simple superphosphate (1 × 105 g of modified biochar captures up to 2.79 × 103 g of P). Moreover, plants can mor... [more]

With increasing demands for cleaning and purification of water, wastewater treatment plants (WWTP) require their most efficient operation. The operators are thus obliged to constantly review the efficiency of the processing units and technological equipment of WWTPs and seek opportunities for improvements. To increase the efficiency of particular equipment, the important parameters to be used for the intensification must be correctly selected. A common WWTP consists of different types of processing units, where the basic parameters can be changed to achieve the highest efficiency (i.e., maximum output with minimum energy consumption) in the WWTP. However, due to many possible technologies in the wastewater treatment process, the combinations of processing units can be complex. In such cases, the efficiency assessment can be misleading if only basic parameters were accessed. Moreover, single-unit intensification can potentially improve the efficiency of the unit itself but cannot guaran... [more]

The energy contained in wastewaters has been identified as a promising sustainable energy resource that could be harvested by using microbial fuel cells (MFC). When dealing with real wastewaters, the MFCs should be able to manage high flow rates and flow rates fluctuations. In this work, the short-term effects of the influent flow rate variations on the performance of a microbial fuel cell has been studied. With this aim, the influent flow rate was stepwise increased from 0.72 to 7.2 L/d and then stepwise decreased. The obtained results indicate that, on the one hand, an increase in the influent flow rate leads to higher chemical oxygen demand removal rates up to 396 g/(L/d) and higher electric power generation almost 18 mW/m2, but to lower coulombic efficiencies. On the other hand, the reduction of the flow rate increases the coulombic efficiencies, as well as the percentage of chemical oxygen demand removed, but decreases electric power generation. In the short-term, the exposition t... [more]

An essential aspect of wastewater treatment systems based on membranes is fouling, which leads to a decrease in their performance and durability. The membrane biofouling is directly related to the deposition of biological particles (e.g., microorganisms in the form of biofilm) on the membrane surface. The objective of the study was to investigate the possibility of using nonthermal plasma for membrane treatment to overcome the biofouling problem. The removal of biological cells from the membrane surface was performed in a dielectric barrier discharge (DBD) plasma. The biofoulant (i.e., activated sludge) on the surface of membranes was treated with plasma for 3−10 min, corresponding to a plasma dose of 13−42 J cm−2. Results of biofouling removal studies indicated that the process was very efficient (i.e., lethal effect was also observed) and dependent on the type of membrane and exposure time to the nonthermal plasma. Moreover, investigations of the influence of plasma treatment on extr... [more]

The current work presents the electro-oxidation of olive mill and biodiesel wastewaters in an alkaline medium with the aim of hydrogen production and simultaneous reduction in the organic pollution content. The process is performed, at laboratory scale, in an own-design single cavity electrolyzer with graphite electrodes and no membrane. The system and the procedures to generate hydrogen under ambient conditions are described. The gas flow generated is analyzed through gas chromatography. The wastewater balance in the liquid electrolyte shows a reduction in the chemical oxygen demand (COD) pointing to a decrease in the organic content. The experimental results confirm the production of hydrogen with different purity levels and the simultaneous reduction in organic contaminants. This wastewater treatment appears as a feasible process to obtain hydrogen at ambient conditions powered with renewable energy sources, resulting in a more competitive hydrogen cost.

Batch electrocoagulation (BEC), continuous electrocoagulation (CEC), and chemical precipitation (CP) were compared in struvite (MgNH4PO4·6H2O) precipitation from synthetic and authentic water. In synthetic water treatment (SWT), struvite yield was in BEC 1.72, CEC 0.61, and CP 1.54 kg/m3. Corresponding values in authentic water treatment (AWT) were 2.55, 3.04, and 2.47 kg/m3. In SWT, 1 kg struvite costs in BEC, CEC, and CP were 0.55, 0.55, and 0.11 €, respectively, for AWT 0.35, 0.22 and 0.07 €. Phosphate removal in SWT was 93.6, 74.5, and 71.6% in BEC, CEC, and CP, respectively, the corresponding rates in AWT were 89.7, 77.8, and 74.4%. Ammonium removal for SWT in BEC, CEC, and CP were 79.4, 51.5, and 62.5%, respectively, rates in AWT 56.1, 64.1, and 60.9%. Efficiency in CEC and BEC are equal in nutrient recovery in SWT, although energy efficiency was better in CEC. CP is cheaper than BEC and CEC.

Recent national government policy in Ireland proposes a radical transformation of the energy sector and a large reduction in CO2 emissions by 2050. Water and energy form the water−energy nexus, with water being an essential component in energy production. However, the connection between the production of energy and water is rarely made. In particular, the end-user processes are generally excluded because they occur outside the water industry. The present study includes two simple approaches for industrial sites to calculate their carbon footprint in the water sector. The assessment of the milk powder manufacturing using both approaches indicates that the combined emission factor of the water supply and treatment is approximately 1.28 kg CO2 m−3 of water. The dairy production among steel, textile, and paper industries appears to be the most carbon-emitting industry. However, the results show that the carbon intensity of the water supply and treatment can be minimized by the integration... [more]

Aerobic granular sludge (AGS) with oversized diameter commonly affects its stability and pollutant removal. In order to effectively restrict the particle size of AGS, a sequencing batch reactor (SBR) with a spiny aeration device was put forward. A conventional SBR (R1) and an SBR (R2) with the spiny aeration device treating tannery wastewater were compared in the laboratory. The result indicates that the size of the granular sludge from R2 was smaller than that from R1 with sludge granulation. The spines and air bubbles could effectively restrict the particle size of AGS by collision and abrasion. Nevertheless, there was no significant change in mixed liquor suspended solids (MLSS) and the sludge volume index (SVI) in either bioreactors. The removal (%) of chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) in these two bioreactors did not differ from each other greatly. The analysis of biological composition displays that the proportion of Proteobacteria decreased slightly in R... [more]

Rural sanitation is still a challenge in developing countries, such as Brazil, where the majority population live with inadequate services, compromising public health and environmental safety. In this context, this study analyzed the demographic density of these rural agglomerations using secondary data from the Brazilian Institute of Geography and Statistics (IBGE). The goal was to identify the possibilities associated with using small-scale upflow anaerobic sludge blanket (UASB) reactors for sewage treatment, mainly focusing on biogas production and its conversion into energy for cooking, water heating and sludge sanitization. Results showed that most rural agglomerations lacking the appropriate sewage treatment were predominant from 500 to 1500 inhabitants in both northern and southern Brazilian regions. The thermal energy available in the biogas would be enough to sanitize the whole amount of sludge produced in the sewage treatment plants (STPs), producing biosolids for agricultura... [more]

Water reuse is now becoming a global necessity. However, one of the drawbacks in releasing wastewater into the environment is some persistent pollutants that are not completely removed in wastewater treatment plant. Residual bacteria and antibiotics in the inflowing wastewater can contribute to the antibiotic resistance spread in the aquatic environment. This study determined the effectiveness of activated sludge process for fecal coliform bacteria elimination, and also the Escherichia coli resistance to antimicrobial agents as erythromycin, azithromycin, clarithromycin, ofloxacin, ciprofloxacin, trimethoprim, and metronidazole in treated wastewater. The research was carried out using the membrane filtration technique, and the susceptibility of isolates to antimicrobial agents was tested by the disc diffusion method. The concentrations of fecal coliform bacteria and Escherichia coli differed significantly depending on the seasonal period in which it was carried out. Despite up to 99% r... [more]

The re-use of wastewater is an increasingly important subject. Most recently, several attempts were reported to convert wastewater in harmless or even valuable substances by the use of electrical current. Electrochemistry is an old approach. The renewed interest stems from the fact that electrical current is often available in abundance, for example from solar energy in arid regions, while clean water is not. Experimentally, one has to deal with very many products which are the result of many reaction steps. Here, theory can help. Using Car−Parrinello molecular dynamics, we simulate the first few reaction steps of the electrolysis of wastewater. On the basis of previous studies, we investigate the reaction of carbon dioxide and nitrogen compounds. The results show a great variety of reaction steps and resulting products. Some of them are technologically interesting, such as hydrogen and formic acid.

This study uses the fuzzy analytical hierarchy process (FAHP) method to prioritize contracting methods to determine the most suitable contract option for water and wastewater projects (WWP). Content analysis, a two-round Delphi survey technique, and a series of validation and reliability tests helped establish the 18 key criteria for FAHP analysis. Consequently, data collected from experts through a pairwise comparison questionnaire form the basis for the inputs for the FAHP analysis. Consequently, the final weightings were derived for each of the key criteria and available contracting methods. The results indicate that the bilateral, cooperative, and trilateral contracting methods are the most suitable for WWP in Iran, with the highest weighting. The study provides useful guidance for the top management of project firms in selecting the optimal contracting method for their projects and offers significant contributions from theoretical and practical perspectives.

Photocatalytic degradation is one of the environmentally friendly methods used in treating dye wastewater. In this study, a series of MXene/g-C3N4 heterostructure photocatalysts with different loading amounts of MXene (1, 4, 8, and 12 wt.%) were successfully synthesized via the wet impregnation method and their photocatalytic activity was evaluated via the degradation of methylene blue under visible-light irradiation. As such, the 1 wt.% MXene/g-C3N4 heterostructure photocatalyst achieved a high degradation of methylene blue compared to the pure g-C3N4 under visible-light illumination of 180 min. This significant improvement was attributed to the intimate interfacial contact, evidently from the FESEM analysis, which allows the smooth photocharge carriers to transport between g-C3N4 and MXene. Additionally, the larger BET surface area demonstrated by the 1 wt.% MXene/g-C3N4 heterostructure allowed this sample to have higher adsorption of dye molecules and provided a higher number of rea... [more]

Water treatment generally does not specifically address the removal of microplastics (MPs). Nevertheless, treatment plants process water effectively, and the number of synthetic microparticles in effluents is usually very low. Still, discharge volumes from water-treatment plants are often elevated (reaching around 108 L/day), leading to the daily discharge of a substantial number of MPs and microfibers. Furthermore, MPs accumulate in the primary and secondary sludge, which in the end results in another environmental problem as they are currently used to amend soils, both for cultivation and forestry, leading to their dispersion. Something similar occurs with the treatment of water intended for human consumption, which has a much lower but still significant number of MPs. The amount of these pollutants being released into the environment depends on the processes that the water undergoes. One of the most-used treatment processes is rapid sand filtration, which is reviewed in this article... [more]

In recent years, anaerobic membrane bioreactors (AnMBRs) technology, a combination of a biological reactor and a selective membrane process, has received increasing attention from both industrialists and researchers. Undoubtedly, this is due to the fact that AnMBRs demonstrate several unique advantages. Firstly, this paper addresses fundamentals of the AnMBRs technology and subsequently provides an overview of the current state-of-the art in the municipal and domestic wastewaters treatment by AnMBRs. Since the operating conditions play a key role in further AnMBRs development, the impact of temperature and hydraulic retention time (HRT) on the AnMBRs performance in terms of organic matters removal is presented in detail. Although membrane technologies for wastewaters treatment are known as costly in operation, it was clearly demonstrated that the energy demand of AnMBRs may be lower than that of typical wastewater treatment plants (WWTPs). Moreover, it was indicated that AnMBRs have th... [more]

In this study, zinc oxide nanoparticles (ZnO NPs) were biosynthesized with the use of an extract derived from seaweed (Sargassum sp.) and used as a sorbent for the removal of Cr(III) ions from wastewater. The biosorption properties of the seaweed itself as well as of the post-extraction residue were investigated for comparison. ZnO NPs were characterized with UV−vis, ICP-OES, FTIR, XRD, and SEM techniques. The sorption capacity of the (bio)sorbents was investigated as a function of contact time at different pH values and initial concentrations of metal ions. Sorption kinetics and isotherms were studied in order to comprehend the sorption nature and mechanism. The sorption kinetic data were well-fitted with the pseudo-second-order model, and the highest sorption capacity was calculated for ZnO NPs (137 mg/g), whereas those calculated for Sargassum sp. (82.0 mg/g) and the post-extraction residue (81.3 mg/g) were comparable (at pH 5 and 300 mg of Cr(III) ions/L). The adsorption isotherms... [more]

In this study, chromate adsorption onto red peanut skin (RPS) was investigated in a fixed-bed column; FTIR, PZC, SEM, DLS, and BET were used to evaluate its adsorption properties. The experiments were conducted to determine the effect of physical parameters, including the inlet initial Cr(VI) concentration (100−500 mg L−1), bed height (10−20 cm), and feed flow rate (13.59−23.45 mL min−1). They were carried out to predict breakthrough curves. The adsorption capacity coefficients were determined using the most widely used Bohart−Adams model. It was tested to fit experimental data, for a better understand the dynamic behavior, and for further optimize column performance. It was found that the Cr(VI) uptake decreases when increasing the flow rate and that high chromate concentration and bed height consequently increase the column’s life span. A high column adsorption capacity can be achieved with a higher Cr(VI) concentration due to the higher driving force. The results indicated that the... [more]

The purpose of this study is to explore the impact of pollution control on industrial production efficiency in 31 provinces and cities in the Yellow River and Non-Yellow River basins in China from 2013 to 2017, using the methods of the directional distance function (hereinafter referred to as DDF) and the technology gap ratio (hereinafter referred to as TGR) in parallel, while taking the industrial production sector (labor force, total capital formation, energy consumption and industrial water consumption) and the pollution control sector (wastewater treatment funds and waste gas treatment funds) as input variables. Undesirable outputs (total wastewater discharge, lead, SO2 and smoke and dust in wastewater) and an ideal output variable (industrial output value) are taken as output variables. It is found that the total efficiency of DDF in the Non-Yellow River Basin is 0.9793, which is slightly better than 0.9688 in the Yellow River Basin. Among the 17 provinces and cities with a total... [more]