The article presents a method for solving the inverse problem of a two-dimensional anomalous diffusion equation with a Riemann−Liouville fractional-order derivative. In the first part of the present study, the authors present a numerical solution of the direct problem. For this purpose, a differential scheme was developed based on the alternating direction implicit method. The presented method was accompanied by examples illustrating its accuracy. The second part of the study concerned the inverse problem of recreating the model parameters, including the orders of the fractional derivative, in the anomalous diffusion equation. Equations of this type can be used to describe, inter alia, the heat conductivity in porous materials. The ant colony optimization algorithm was used to solve this problem. The authors investigated the impact of the distribution of measurement points, the use of different mesh sizes, and the input data errors on the obtained results.

This paper presents the identification and classification of steel cord failures in the conveyor belt core based on an analysis of a two-dimensional image of magnetic field changes recorded using the Diagbelt system around scanned failures in the test belt. The obtained set of identified changes in images, obtained for numerous parameters settings of the device, were the base for statistical analysis. This analysis makes it possible to determine the Pearson’s linear correlation coefficient between the parameters being changed and the image of the failures. In the second stage of the research, artificial intelligence methods were applied to construct a multilayer neural network (MLP) and to teach it appropriate identification of damage. In both methods, the same data sets were used, which made it possible to compare methods.

This work aims to evaluate the Flexibility Potential that a residential household can effectively provide to the public grid for participating in a Demand Response activity. In detail, by using 14 dwellings electrical data collection, an algorithm to simulate the Load Shifting activity over the daytime is implemented. That algorithm is applied to different scenarios having considered the addition of several technical constraints on the end users’ devices. In such a way, more realistic demand-side management actions are implemented in order to assess the Flexibility Potential deriving from the loads shifting. Basically, by performing simulations it is possible to investigate how the household appliances real operating conditions can reduce the theoretical Flexibility Potential extent. Starting from a Flexibility Price-Market-based Strategy, this work simulates the shifting over the day and night-time of some flexible loads, i.e., the shiftable and the storable ones. Specifically, all in... [more]

To meet climate change challenges, the UK government is aiming to reach zero emissions by 2050. The heavy-duty transportation sector contributes 17% to the UKs total emissions, so to combat this, alternative power units to traditional fossil fuel-reliant internal combustion engines (ICEs) are being utilized and investigated. Hydrogen fuel cells are a key area of interest to try and reduce these transportation emissions. To gain a true view of the impact that hydrogen fuel cells can have, this study looks at the impact the manufacturing of a fuel cell has upon the environment, from material extraction through to the usage phase. This was done through the use of a lifecycle assessment following ISO 14040 standards, with hydrogen systems being compared to alternative systems. This study has found that whilst fuel cells depend upon energy intensive materials for their construction, it is possible to reduce emissions by 34−87% compared to ICE systems, depending upon the source of hydrogen u... [more]

Thermal convective flows are common phenomena in real urban canyons and strongly affect the mechanisms of pollutant removal from the canyon. The present contribution aims at investigating the complex interaction between inertial and thermal forces within the canyon, including the impacts on turbulent features and pollutant removal mechanisms. Large-eddy simulations reproduce infinitely long square canyons having isothermal and differently heated facades. A scalar source on the street mimics the pollutant released by traffic. The presence of heated facades triggers convective flows which generate an interaction region around the canyon-ambient interface, characterised by highly energetic turbulent fluxes and an increase of momentum and mass exchange. The presence of this region of high mixing facilitates the pollutant removal across the interface and decreases the urban canopy drag. The heating-up of upwind facade determines favourable convection that strengthens the primary internal vo... [more]

Inter-Turn Short Circuit (ITSC) fault in stator winding is a common fault in Doubly-Fed Induction Generator (DFIG)-based Wind Turbines (WTs). Improper measures in the ITSC fault affect the safety of the faulty WT and the power output of the Wind Farm (WF). This paper combines derating WTs and the power optimization of the WF to diminish the fault effect. At the turbine level, switching the derating strategy and the ITSC Fault Ride-Through (FRT) strategy is adopted to ensure that WTs safely operate under fault. At the farm level, the Particle Swarm Optimization (PSO)-based active power dispatch strategy is used to address proper power references in all of the WTs. The simulation results demonstrate the effectiveness of the proposed method. Switching the derating strategy can increase the power limit of the faulty WT, and the ITSC FRT strategy can ensure that the WT operates without excessive faulty current. The PSO-based power optimization can improve the power of the WF to compensate f... [more]

The present study is aimed at studying the energy and environmental performance at various engine loads (BMEP) with identical start of injection (SOI) for all fuel types. The combustion parameters for the fuel mixtures were analyzed using the AVL BOOST software (BURN subroutine). Five different blends were tested, consisting completely of renewable raw materials based on hydrotreated vegetable oil (HVO) and fatty acid methyl ester (FE100), and the properties of diesel fuel (D) were compared with respect to these blends. The mixtures were mixed in the following proportions: FE25 (FE25HVO75), FE50 (FE50HVO50), FE75 (FE75HVO25). In this study, diesel exhaust was found to produce higher NOx values compared to FE blends, with HVO being the lowest. Hydrocarbon and smoke emissions were also significantly lower for blends than for diesel. Possible explanations are the physical properties and fatty acid composition of fuel mixtures, affecting injection and further combustion. The results showed... [more]

Green bonds have increasingly been utilized around the world as a source of financing for renewable energy development, designed with compliance requirements and measurable economic returns to investors, while mitigating climate change. However, the efficacy of green bond arranged in the emerging economies for financing renewable energy assets and how the underlying risks are managed have remained to be explored. The paper aims to examine the evolving green financial system sponsored by both public and private institutions in managing such risks within China’s emerging economy. A case study of green financing for a bundle of wind power assets led by a state-owned enterprise (SOE) reveals an alternative approach by structuring public−private collaboration while stipulating market-based financial incentives to institutional stakeholders under a political economy. This institutional consortium is composed of a state development bank, a commercial bank, credit rating agencies, institutiona... [more]

The thermal management of magnetic components for power electronics is crucial to ensure their reliability. However, conventional thermal models for magnetic components are known to have either poor accuracy or excessive complexity. Contrary to these models, the use of Thermal Resistance Matrices is proposed in this paper instead, which combine both accuracy and simplicity. They are usually used to characterize semiconductor devices, but not for magnetic components. The guidelines to apply Thermal Resistance Matrices for magnetic components are discussed in detail. The accuracy of this model is validated by 3D FEA simulations and experimental results, showing an absolute error lower than 5 ∘C and a relative error between −6.4% and 3.9%, which is outstanding compared to the carried-out literature review.

Erosion causes substantial damage in many industrial equipment such as pump components, valves, elbows, and plugged tees. In most cases, erosion is coupled with corrosion, resulting in major financial loss (nearly 3.4% of the global gross domestic product) as evidenced in oil and gas industries. In most cases, the erosion occurs in a submerged water medium. In this paper, erosion characteristics of stainless steel 316 were investigated computationally in a water-submerged jet impingement setup. The erosion profiles and patterns were obtained for various parameters over ranges of inlet velocities (3 to 16 m/s), nozzle diameters (5 to 10 mm), nozzle−target distances (5 to 20 mm), nozzle shapes (circular, elliptical, square, and rectangular), impingement angles (60° to 90°), and particle sizes (50 to 300 µm). The range of Reynolds number studied based on nozzle diameters is 21,000−120,000. The Eulerian−Lagrangian approach was used for flow field prediction and particle tracking considerin... [more]

This paper proposes a design guideline for selecting the pole and slot combination of an outer-rotor permanent magnet synchronous motor (PMSM) using a maximum slot occupation (MSO) coil. Because the MSO coil has a large conductor area, the AC Joule loss in the conductors may be increased at high frequencies. To ensure high-efficiency for the PMSM, it is necessary to reduce the loss. Thus, it is important to select the pole- and slot- combination that has the minimum AC Joule loss. The loss is caused by skin/proximity effects and variations in the slot leakage flux. The skin effect is due to the armature winding and the variation in the slot leakage flux is due to the field flux. A method for separating the AC Joule loss due to each component using the frozen permeability method is proposed. Based on the proposed method, the effect of each cause on the loss at various pole- and slot- combinations is analyzed in this study.

Stable operation of fuel cell air compressions is constrained by rotating surge in low flowrate conditions. In this paper, a diagnosis criterion based on wavelet transform to solve the surge fault is proposed. First of all, the Fourier transform was used to analyze the spectral characteristics of the outlet flowrate. Before wavelet transform was used, the data are standardized. This step eliminated the influence of the flowrate’s absolute value. Then, the wavelet coefficients under characteristic frequencies were extracted. Finally, the diagnosis criterion’s threshold, which indicates the surge occurrence, was defined from the perspective of safety margin. The criterion threshold alerted a surge only 1 s after it occurred. The analysis results show that the criterion meets with the expectation, and it can be used for the control of anti-surge valve.

In this study, a modified non-uniform adiabatic section in a Two-Phase Closed Thermosiphon (TPCT) is proposed where the uniform section was replaced by convergent and divergent (C-D) sections. The heat transfer analysis was performed on the modified TPCT and their findings were compared with standard TPCT. The deionized water (DI) in the proportion of 30 vol% is filled in both the TPCTs. Further, the heat transfer performance analysis was carried out for three different orientations, such as 0°, 45° and 90°, and heat input was varied from 50 to 250 W. The effect of these geometrical changes and inclination angles on the heat transfer performance of both the TPCT were evaluated to compare the thermal resistance, wall temperature variation and heat transfer coefficient. The non-dimensional numbers such as Weber (WE), Bond (BO), Condensation (CO) and Kutateladze (KU) were investigated based on heat fluxes for both TPCTs. By introducing the convergent-divergent section nearer to the conden... [more]

Modern mobility and adaptation of transport and communication systems to the requirements of the inhabitants are both inseparable elements of the developed concept of smart cities. One of the important stages in the implementation of this concept is the planning stage, taking into account the complexity and a large number of determinants that impact the effectiveness of decisions related to the planning of transport, communication and logistic systems. The purpose of the article is to lay out a model of a system based on the integration of selected Internet of Things tools used in smart cities to support urban development planning processes in the scope of the ongoing modification of transport, public communication and logistic systems. The model was developed on the basis of the cooperation between the authors and the boards of selected cities’ observations made during the authors’ travels and on the basis of identification and analysis of IT systems types and ICT (Information and Com... [more]

In this paper, we report an investigation of adding a non-hydride forming element in the multicomponent Ti-V-Nb-M system. By the Calculation of Phase Diagrams approach (CALPHAD), the thermodynamic phase stability of the TiVNbT (T = Cr, Mn, Fe, Co, and Ni) was investigated, and Cr was selected as the fourth alloying element due its high tendency to stabilize body-centered cubic solid solutions (BCC). The (TiVNb)100−xCrx alloys (with x = 15, 25, and 35 at.% Cr) were synthesized by arc-melting. The structural characterization reveals that the three alloys were composed of a major BCC phase, which agrees with the thermodynamic calculations. The three alloys absorb hydrogen at room temperature without any activation treatment, achieving a hydrogen uptake of about H/M = 2. The Pressure-Composition-Isotherms curves (PCI) has shown that increasing the Cr amount increases the equilibrium pressures, indicating that tunable H storage properties can be achieved by controlling the alloys’ Cr conten... [more]

Selection and assessment of mining equipment used in open pit rock mines relies chiefly on estimates of overall exploitation cost. The rational arrangement of mining equipment and systems comprising loading machines, haul trucks and crushing plants should be preceded by a thorough analysis of technical and economic aspects, such as investment outlays and the costs of further exploitation, which largely determine the costs of mining operations and the deposit value. Additionally, the operational parameters of the mining equipment ought to be considered. In this study, a universal set of evaluation criteria has been developed, and an evaluation method has been applied for the selection of surface mining equipment and the processing system to be operated in specific mining conditions, defined by the user. The objective of this study is to develop and apply the new methodology of multi-criteria selection of open pit rock mining equipment based on multiple criteria decision-making (MCDM) pr... [more]

The share of renewable and distributed energy resources (DERs), like wind turbines, solar photovoltaics and grid-connected batteries, interconnected to the electric grid is rapidly increasing due to reduced costs, rising efficiency, and regulatory requirements aimed at incentivizing a lower-carbon electricity system. These distributed energy resources differ from traditional generation in many ways including the use of many smaller devices connected primarily (but not exclusively) to the distribution network, rather than few larger devices connected to the transmission network. DERs being installed today often include modern communication hardware like cellular modems and WiFi connectivity and, in addition, the inverters used to connect these resources to the grid are gaining increasingly complex capabilities, like providing voltage and frequency support or supporting microgrids. To perform these new functions safely, communications to the device and more complex controls are required.... [more]

This study addresses the problem of geological structure tightness for the purposes of enhanced oil recovery with CO2 sequestration. For the first time in the history of Polish geological survey the advanced methods, practical assumptions, and quantitative results of detailed simulations were applied to study the geological structure of a domestic oil reservoir as a potential candidate for a combined enhanced oil recovery and CO2 sequestration project. An analysis of the structure sequestration capacity and its tightness was performed using numerical methods that combined geomechanical and reservoir fluid flow modelling with a standard two-way coupling procedure. By applying the correlation between the geomechanical state and transport properties of the caprock, threshold pressure variations were determined to be a key factor affecting the sealing properties of the reservoir−caprock boundary. In addition to the estimation of the sequestration capacity of the structure, the process of C... [more]

The energy consumption and emissions in the urban transportation are influenced not only by technical efficiency in the mobility operations but also by the citizens’ mobility behaviors including mode choices and modal shift among sustainable and unsustainable mobility modes. Information and Communication Technologies (ICTs) can play an important role in the mobility behaviors of citizens, and it is necessary to study whether ICTs support sustainable mode choices like public transport and nonmotorized modes, which increase the total energy efficiency in the urban mobility and reduce traffic congestion and related emissions. This paper focuses on the two most popular ICT services in the urban transport, which are ATIS (Advanced Traveler Information Systems), and ridesourcing services. This study used the New York Citywide Mobility Survey (CMS) findings with a sample of 3346 participants. The associations between using these two ICT services and the mobility behaviors (mode choice with AT... [more]

Extensive studies are conducted to investigate the potential and techno-economic feasibility of bioenergy routes in different countries. However, limited researches have been focused on the whole national agricultural bioenergy resources in Egypt. This research provides an assessment of the potential agricultural biomass resources for electric energy production in Egypt. It provides a strategic perspective for the design of a national network of biomass power plants to utilize the spatially available agricultural residues throughout a country. A comprehensive approach is presented and is applied to Egypt. First, the approach estimates the amount, type, and characteristics of the agricultural residues in each Egyptian governorate. Then, a techno-economic appraisal for locating a set of collection stations, and installing a direct combustion biomass power plant in each governorate is conducted. SAM simulation software is used for the technical and economic appraisals, and preliminary pla... [more]

Boiling, as the most efficient type of convective heat transfer, is an area of interest in many fields of industry and science. Many works have focused on improving the heat transfer efficiency of boiling by altering the physical and chemical properties of surfaces by using different technological processes in their fabrication. This paper presents experimental investigations into pool boiling on enhanced surfaces with open microchannels. The material of the fabricated surface was copper. Parallel microchannels made by machining were about 0.2, 0.3, and 0.4 mm wide, 0.2 to 0.5 mm deep, and spaced with a pitch equal to twice the width of the microchannel. The experiments were carried out in water at atmospheric pressure. The experimental results obtained showed an increase in the heat flux and the heat transfer coefficient for surfaces with microchannels. The maximum (critical) heat flux was 2188 kW/m2, and the heat transfer coefficient was 392 kW/m2K. An improvement in the maximum heat... [more]

China has experienced rapid social and economic development in the past 40 years. However, excessive consumption of fossil fuel energy has caused an energy shortage and led to severe environmental pollution. To achieve sustainable development, China is striving to transform its growth mode. Adopting renewable energy (RE) including solar photovoltaic (PV) power is an effective measure. How to promote the further development of solar PV power under the scenario of China’s aspirational target of carbon peak by 2030 and 20% RE ratio in the energy mix remains a theme that need to be addressed. This paper analyzes the potential opportunities and challenges confronting solar PV power in China. The analysis covers the dimensions of political, economic, social, and technological (PEST). The results revealed a significant prospect for the further deployment of solar PV power in the coming decades. The aggressive estimated installed capacity of solar PV power is expected to reach 80+ GW annually.... [more]

Energy storage systems (ESS) are becoming essential as a solution for troublesome industrial systems. This study focuses on the application of a type of ESS, a high-power technology known in the literature as supercapacitors or electric double layer capacitors (EDLC). This technology has had a huge impact during the last decade on research related to the electric traction drives, renewable sources and powergrids. Related to this aspect, this paper summarizes the most relevant scientific publications in the last five years that study the use of supercapacitor technology (SCs) in electric traction applications (drives for rail vehicles and drives for road vehicles), generation systems for renewable energy (wind, solar and wave energy), and connection systems to the electric grid (voltage and frequency regulation and microgrids). The technology based on EDLC and the practical aspects that must be taken into account in the op-eration of these systems in industrial applications are briefly... [more]

As the integration of large-scale wind energy is increasing into the electricity grids, the role of wind energy suppliers should be investigated as a price-maker as their participation would influence the locational marginal price (LMP) of electricity. The existing bidding strategies for a wind energy supplier faces limitations with respect to the potential cooperation, other competitors’ bidding behavior, network loss, and uncertainty of wind production (WP) and balancing market price (BMP). Hence, to solve these problems, a novel bidding strategy (BS) for a wind power supplier as a price-maker has been proposed in this paper. The new algorithm, called the evolutionary game approach (EGA) inspired hybrid particle swarm optimization and improved firefly algorithm (HPSOIFA), has been proposed to handle the bidding issue. The bidding behavior of power suppliers, including conventional power suppliers, has been encoded as one species to obtain the equilibrium where the EGA can explore dyn... [more]

The installation of wind energy increased in the last twenty years, as its cost decreased, and it contributes to reducing GHG emissions. A race toward gigantism characterizes wind turbine development, primarily driven by offshore projects. The larger wind turbines are facing higher loads, and the imperatives of mass reduction make them more flexible. Size increase of wind turbines results in higher structural vibrations that reduce the lifetime of the components (blades, main shaft, bearings, generator, gearbox, etc.) and might lead to failure or destruction. This paper aims to present in detail the problems associated with wind turbine vibration and a thorough literature review of the different mitigation solutions. We explore the advantages, drawbacks, and challenges of the existing vibration control systems for wind turbines. These systems belong to six main categories, according to the physical principles used and how they operate to mitigate the vibrations. This paper offers a mul... [more]