To host the 2022 FIFA World Cup, Qatar is facing the greatest challenge in balancing the energy consumptions for cooling the stadiums and the thermal comfort for both players and spectators. Previous studies have not considered using a combined configuration of air curtain and roof cooling supply slot in stadiums to prevent the infiltration of outside hot air and reduce the cooling system’s energy consumption. This paper presents a Computational Fluid Dynamics (CFD) study of thermal and wind modeling around a baseline stadium and simulates the cooling scenarios of air curtains and roof cooling along with the energy consumption estimations for the World Cup matches using Building Energy Simulation (BES). Sensitivity analysis of different supply speeds and supply temperatures of air curtain gates and roof cooling was carried out, and the results showed that scenario six, which provides supply air of 25 m/s and 20 m/s at the roof and air curtain gates with a supply temperature of 10 °C, d... [more]

Shifting from fossil to renewable energy sources is a major global challenge, and in this context, the European Union has promoted sustainable and environmentally friendly growth as early as the Maastricht Treaty of 1992. To date, European institutions have promulgated a series of environmental regulations and directives aimed at promoting and imposing adoption by member states of internal regulations. This paper is focused on Western Europe, and it explores, for each state under analysis, energy policies adopted, the results achieved and recommendations for the future growth of renewable energy. The results show that in countries where energy policy is not fragmented, the yield in renewable energies has been higher, and also in the states where more and various forms of subsidies are foreseen, growth seems to be greater. Finally, the paper provides useful recommendations and future policy implications for states that have not met the 2020 targets.

The article analyses energy and environmental operating parameters of a compression ignition internal combustion engine running on HVO-biobutanol and castor oil fuel blends, also comparing them with parameters of an engine running on convection diesel. Since biobutanol is known for poor lubrication characteristics, it was mixed with 5% of castor oil. The obtained blend of biobutanol and castor oil was mixed with HVO at 2/95, 10/90, and 20/80 v/v and fed to the compression ignition internal combustion engine. The presented physicochemical indicators justified the use of the said fuel blends. Constant engine crankshaft speed of 2000 rpm and a variable load expressed as BMEP of 0.1−0.9 MPa was selected in the research. When using the biobutanol−castor oil additive (hereafter simply biobutanol additive) in HVO, an increase in the rate of heat release (ROHR) and the convergence of its value to that of to conventional diesel fuel was observed. A decrease in BTE values was also observed with... [more]

Cu(In,Ga)Se2 (or CIGS) thin films and devices were fabricated using a modified three-stage process. Using high deposition rates and a low temperature during the process, a copper chloride vapor treatment was introduced in between the second and third stages to enhance the films properties. X-ray diffraction and scanning electron microscopy demonstrate that drastic changes occur after this recrystallization process, yielding films with much larger grains. Secondary ion mass spectrometry shows that the depth profile of many elements is not modified (such as Cu, In and Se) while others change dramatically (such as Ga and Na). Because of the competing effects of these changes, not all parameters of the solar cells are enhanced, yielding an increase of 15% in the device efficiency at the most.

Inducing spanwise motions in the vicinity of solid boundaries alters the energy, mass and/or momentum transfer. Under some conditions, these motions are such that drag is reduced and/or transition to turbulence is delayed. There are several possibilities to induce those spanwise motions, be it through active imposition a predefined velocity distribution at the walls or by careful design of the wall shape, which corresponds to passive control.In this contribution, we investigate the effect that wavy walls might have on delaying transition to turbulence. Direct Numerical Simulation of both planar and wavy-walled channel flows at laminar and turbulent regimes are conducted. A pseudo laminar regime that remains stable until a Reynolds number 20% higher that the critical is found for the wavy-walled simulations. Dynamic Mode Decomposition applied to the simulation data reveals that in these configurations, modes with wavelength and frequency compatible with the surface undulation pattern ap... [more]

The aim of the study was to assess leaching of Cl−, SO42−, and PO43− from ashes formed in household furnaces. The ashes were obtained following the combustion of conventional fuels, namely wood and hard coal, and alternative fuels with various fractions of municipal waste in a household boiler. Aqueous leachates of the ashes were used to determine concentrations of chlorides by titration (Mohr’s method) (21.3−3049.6 mg/dm3), sulphates by the gravimetric method (12.2−244.1 mg/dm3), and phosphates by spectrophotometry (0.01−67.2 mg/dm3). It was found that co-combustion of municipal waste with plastic-coated paper cartons, diapers, or a mixed waste fraction leaves the greatest amount of ashes on the furnace grate. The highest amounts of Cl−, SO42−, and PO43− were leached from ashes generated from burning a mix of wood and coals, or wood alone (different species). The addition of municipal waste to the process of burning the conventional and alternative fuels studied did not significantly... [more]

This paper presents an inductive power transfer system on the basis of a double single-phase three-level T-type inverter and two split transmitting coils for constant current and constant voltage wireless charging of low-voltage light electric vehicle batteries with closed-loop control, considering time-delay communication constraints. An optimal control structure and a modified control strategy were chosen and implemented to the wireless power transfer system as a result of a review and analysis of existing solutions. The control system analysis and adjustment of the coefficients of the regulator using Laplace transform were performed. Our study addressed the behavior of the control system with different time delays as well as the dynamic response of the system. The detecting algorithm of a secondary coil was proposed, which ensured efficient system operation and increased the functionality, safety and usability of the device. The efficiency of energy transfer of 90% was reached at th... [more]

The purpose of the study is to identify factors affecting the intention to change an energy supplier. This is in a country, Poland, where competition in the energy market has been intensifying over several years, but incumbent suppliers still have an extremely strong position on the market, and the tendency to change an energy supplier is relatively low. The survey was conducted in 2020 on a sample of 1216 adults. The research results were used for a multigroup SEM (Structural Equation Modelling) analysis using AMOS 26. The main findings indicated a strong impact on a general image of a company, as well as the lack of importance of a green image of the current energy supplier. In the general research approach, there are no visible differences in the impact of the perceived price transparency on the intention to switch the supplier. However, taking into consideration two groups (a low energy bill vs. a high energy bill), some interesting differences are visible. In the markets with low... [more]

Local flexibility markets or smart markets are new tools used to harness regional flexibility for congestion management. In order to benefit from the available flexibility potential for grid-oriented or even grid-supportive applications, complex but efficient and transparent allocation is necessary. This paper proposes a constrained optimization method for matching the flexibility demand of grid operators to the flexibility supply using decentralized flexibility options located in the distribution grid. Starting with a definition of the operational and stakeholder environment of smart market design, various existing approaches are analyzed based on a literature review and a resulting meta-analysis. In the next step, a categorization of the allocation method is conducted followed by the definition of the optimization goal. The optimization problem, including all relevant input parameters, is identified and formulated by introducing the relevant boundary conditions and constraints of fle... [more]

The number of aircraft flights worldwide has increased steadily since the introduction of air transportation to the public. Accordingly, environmental issues caused by the exhaust gases of aircraft engines have emerged. In particular, international organizations have crafted emission regulations since gases exhausted during takeoff and landing have been identified as the direct cause of air pollution near airports. Nitrogen oxides (NOx) produced at high combustion temperatures and carbon monoxide (CO) due to incomplete combustion affect the performance of the combustion chamber. Therefore, annular combustors comprising two annular zones have been developed to reduce the emissions of these two substances, which occur under different conditions. Parameters that should be considered when modifying a conventional single annular (SAC) to a double annular combustor (DAC) are discussed herein. In this paper, an optimization algorithm for obtaining the main design parameters of the DAC is pres... [more]

Aesthetic appearance of building-integrated photovoltaic (BIPV) products, such as semitransparent PV (STPV) glass, is crucial for their widespread adoption and contribution to the net-zero energy building (NZEB) goal. However, the visual distortion significantly limits the aesthetics of STPV glass. In this study, we investigate the distortion effect of transparent periodic-micropattern-based thin-film PV (PMPV) panels available in the market. To minimize the visual distortion of such PMPV glass panel types, we design and develop an aperiodic micropattern-based PV (APMP) glass that significantly reduces visual distortion. The developed APMP glass demonstrates a haze ratio of 3.7% compared to the 10.7% of PMPV glass. Furthermore, the developed AMPV glass shows an average visible transmittance (AVT) of 58.3% which is around 1.3 times higher than that of AMPV glass (43.8%). Finally, the measured CIELAB values (L* = 43.2, a* = −1.55, b* = −2.86.) indicate that our developed AMPV glass posse... [more]

The integration of distributed power plants that rely on renewable energy sources (RESs) is a major challenge for system operators (SOs) due to the variable nature of the input energy (e.g., wind and solar irradiation) to these power sources. A key solution to such a challenge is to coordinate and combine the power generation of these sources such that their behavior is closer to a conventional and dispatchable power station, taking into account the limitations imposed by the battery storage system (BESS), so it is seen as a hybrid power plant (HPP) from the SOs’ viewpoint. This paper develops a model of HPP that encompasses two generation technologies, wind and photovoltaic farms, which are assisted by a BESS. The paper proposes a comprehensive control method that can smooth the HPP output with minimized energy rejection whilst enabling the HPP to provide synthetic inertia and primary frequency response, which are grid-code compliant. The proposed control method is validated through v... [more]

The commercial and financial attributes of oil have significantly changed the evolution characteristics of prices and returns of the international crude oil market. Using monthly data from April 2003 to October 2020, this paper identifies dynamic characteristics of oil’s commercial and financial attributes based on the structural vector autoregressive model (SVAR) and further analyzes their market effects with different attributes. The result shows that there are situations of commercial and financial attributes dominating, and dual attributes co-dominating for oil. Furthermore, their durations account for 51%, 23%, and 26% respectively, of the full sample. Besides, the reactions of crude oil price or return to the different properties of oil are heterogeneous. Specifically, the dual attributes of oil play the most important role in the price evolution of the international crude oil market, which is 80.851. There are significant differences among the impact of different attributes of o... [more]

This study proposes a calculation methodology that determines the optimal boundary parameters of the single-diode photovoltaic model. It allows the calculation of the single-diode photovoltaic model when no reference parameter boundaries are available. The differential evolution algorithm, integrated with a step-by-step boundary definition module, is used to calculate the optimal parameters of the single-diode photovoltaic model, improving the performance of the classic algorithm compared with other studies. The solution is validated by comparing the results with well-established algorithms described in the state-of-the-art, and by estimating the five important points (cardinal points) of an IV curve, namely short-circuit, maximum power, and open circuit points, using a database composed of 100 solar photovoltaic modules. The results show that an optimal set of parameter boundaries enables the differential evolution algorithm to minimize the error of the estimated cardinal points. More... [more]

In this paper, the frequency broadband effect in vibration energy harvesting was studied numerically using a quasi-zero stiffness resonator with two potential wells and piezoelectric transducers. Corresponding solutions were investigated for system excitation harmonics at various frequencies. Solutions for the higher voltage output were collected in specific branches of the power output diagram. Both the resonant solution synchronized with excitation and the frequency responses of the subharmonic spectra were found. The selected cases were illustrated and classified using a phase portrait, a Poincaré section, and recurrence plot (RP) approaches. Select recurrence quantification analysis (RQA) measures were used to characterize the discussed solutions.

The exploitation of power inductors outside their linear region in switching converters can be achieved by raising the current until a decrease in the inductance can be noticed. This allows using a smaller magnetic core, increasing the power density of the converter. On the other hand, a detailed description of the magnetization curve including the temperature is required. Since this information is often not included in the inductor’s datasheets, this paper shows how to identify the behavior of an inductor when it is operated up to saturation and its temperature rises. In order to characterize the inductor in real operating conditions, a dedicated measurement rig was developed. It consists of a switching converter that encompasses the inductor under test and is controlled by a virtual instrument developed in LabVIEW. The characterization system was tested by retrieving the inductance and the magnetization curves vs. current for two commercial inductors at core temperatures up to 105 °C... [more]

The sustainable environment has been a desired situation around the world for the last few decades. Environmental contaminations can be a consequence of various economic activities. Different socio-economic factors influence the environment positively or negatively. Many previous studies have resulted in the efficient allocation of inputs as an environment-friendly component. This paper investigates the effects of energy efficiency on ecological footprint in the ASEAN region using balanced panel data from 2001 to 2019. First, this paper technically derives the energy efficiency, using the stochastic frontier analysis (SFA) of the translog production type of single output and multiple inputs. Findings of the SFA show that the Philippines and Singapore have the highest energy efficiency (94%) and Laos has the lowest energy efficiency (85%) in the ASEAN region. The estimated average efficiency score of the ASEAN region was around 90%, ranging from 85% to 96%, indicating that there is stil... [more]

The Renewable Energy Directive and the Electricity Market Directive, both parts of the Clean Energy for all Europeans Package (issued in 2019), provide supranational rules for renewable energy communities and citizen energy communities. Since national transpositions need to be completed within two years, Austria has already drafted corresponding legislation. This article aims at providing a detailed comparison of the European guidelines and the transposition into Austrian law. The comparison not only shows how, and to what extent, the European guidelines are transposed into Austrian law, but also helps to identify loopholes and barriers. The subsequent discussion of these issues as well as positive aspects of the Austrian transposition may be advantageous for legislators and policy makers worldwide in their process of designing a coherent regulatory framework. It is concluded that experts from different areas (i.e., project developers, scientists concerned with energy communities, ener... [more]

A new modulation strategy has been introduced in this paper in order to enhance the boost factor for the three-level quasi-switched boost T-type inverter (3L-qSBT2I). Under this approach, the component rating of power devices is significantly decreased. Moreover, the use of a larger boost factor produces a smaller shoot-through current. This benefit leads to reducing the conduction loss significantly. Furthermore, the neutral voltage unbalance is also considered. The duty cycle of two active switches of a quasi-switched boost (qSB) network is redetermined based on actual capacitor voltages to recovery balance condition. Noted that the boost factor will not be affected by the proposed capacitor voltage balance strategy. The proposed method is taken into account to be compared with other previous studies. The operation principle and overall control strategy for this configuration are also detailed. The simulation and experiment are implemented with the help of PSIM software and laborator... [more]

The increasing share of distributed renewable energy resources (DER) in the grid entails a paradigm shift in energy system operation demanding more flexibility on the prosumer side. In this work we show an implementation of linear economic model predictive control (MPC) for flexible microgrid dispatch based on time-variable electricity prices. We focus on small and medium enterprises (SME) where information and communications technology (ICT) is available on an industrial level. Our implementation uses field devices and is evaluated in a hardware-in-the-loop (HiL) test bench to achieve high technological maturity. We use available forecasting techniques for power demand and renewable energy generation and evaluate their influence on energy system operation compared to optimal operation under perfect knowledge of the future and compared to a status-quo operation strategy without control. The evaluation scenarios are based on an extensive electricity price analysis to increase representa... [more]

Ground-source heat pump systems are renewable and highly efficient HVAC systems that utilise the ground to exchange heat via ground heat exchangers (GHEs). This study developed a detailed 3D finite element model for horizontal GHEs by using COMSOL Multiphysics and validated it against a fully instrumented system under the loading conditions of rural industries in NSW, Australia. First, the yearly performance evaluation of the horizontal straight GHEs showed an adequate initial design under the unique loads. This study then evaluated the effects of variable trench separations, GHE configurations, and effective thermal conductivity. Different trench separations that varied between 1.2 and 3.5 m were selected and analysed while considering three different horizontal loop configurations, i.e., the horizontal straight, slinky, and dense slinky loop configurations. These configurations had the same length of pipe in one trench, and the first two had the same trench length as well. The result... [more]

In the development process for a fractured-porous gas reservoir with developed fracture and active water, edge water or bottom water easily bursts rapidly along the fracture to the production well, and the reservoir matrix will absorb water, reducing the gas percolation channel and increasing the gas phase percolation resistance of the reservoir matrix, therefor reducing the stable production capacity and recovery efficiency of the gas reservoir. For this reason, this paper investigates physical simulation experimental technology and mechanisms as reported by both domestic and foreign scholars regarding water invasion in fractured-porous gas reservoirs. In this paper, it is considered that the future trend and focus of water invasion experiments will be to establish a more realistic three-dimensional physical model on the basis of fine geological description, combined with gas reservoir well pattern deployment and production characteristics, and to fully consider the difference between... [more]

Energy supply for clean cooking is a priority for Sub-Saharan Africa (SSA). Liquefied petroleum gas (LPG, i.e., propane or butane or a mixture of both) is an economically efficient, cooking energy solution used by over 2.5 billion people worldwide and scaled up in numerous low- and middle-income countries (LMICs). Investigation of the technical, policy, economic and physical requirements of producing LPG from renewable feedstocks (bioLPG) finds feasibility at scale in Africa. Biogas and syngas from the circular economic repurposing of municipal solid waste and agricultural waste can be used in two groundbreaking new chemical processes (Cool LPG or Integrated Hydropyrolysis and Hydroconversion (IH2)) to selectively produce bioLPG. Evidence about the nature and scale potential of bioLPG presented in this study justifies further investment in the development of bioLPG as a fuel that can make a major contribution toward enabling an SSA green economy and universal energy access. Techno-econ... [more]

The building sector, as a major energy consumer with high direct and indirect CO2 emissions, plays a vital role in the fight against climate change. In order to make buildings more comfortable, functional, efficient and safe, building services are used. Therefore, building services are the key to decrease their contribution to climate change. Due to the lack of organized literature on this topic, this paper presents the first comprehensive assessment of trends in the literature on building services related to climate change, which was completed by conducting a bibliometric analysis of the existing literature on the topic. The ultimate goal is to provide a source where researchers and other interested parties can find this information in an organized manner. Results show that the most abundant and recent studies related to building services are based on improving energy efficiency by optimizing systems such as ventilation or lighting, the latter with the installation of LED lights. In a... [more]

This paper aims to assess the direct economic impact on the maritime sector from its inclusion in the European Union-Emission Trading System (EU-ETS). The Monitoring, Reporting and Verification (MRV) data are analysed for the estimation of carbon dioxide (CO2) emissions within the European Economic Area (EEA). The economic impact assessment model used is scenario-based, and includes different price incentives, geographical coverage and emission allowances allocation methods. According to our findings, in case the emission allowances are fully auctioned or partially free allocated on the basis of a uniform benchmark, the increased costs would be disproportional among the maritime segments. Such a scheme would penalise Roll-on/Roll-off (RoRo) and Roll-On/Roll-Off/Passenger (RoPax) segments due their high fuel consumption per transport work in relation to oil tankers and bulkers. The establishment of differentiated benchmarks per segment seems to be a prerequisite for the effective inclus... [more]