The filtered mass density function (FMDF) model has been employed for large-eddy simulations (LES) of compressible high-speed turbulent mixing and reacting flows. However, the mixing model remains a pressing challenge for FMDF methods, especially for compressible reactive flows. In this work, a temporal development mixing layer with two different convective Mach numbers, Mc=0.4 and Mc=0.8, is used to investigate the mixing models. A simplified one-step reaction and a real hydrogen/air reaction are employed to study the mixing and turbulence-chemistry interaction. Two widely used mixing models, interaction by exchange with the mean (IEM) and Euclidean minimum spanning tree (EMST), are studied. Numerical results indicate that no difference is observed between the IEM and EMST models in simple reaction flows. However, for hydrogen/air reactions, the EMST model can predict the reaction more accurately in high-speed flow. For mixing models in compressible reactive flows, the requirement of... [more]

The energy transition is accompanied by developing a digital decentralized low-carbon energy infrastructure with renewable-based generating plants as its main elements. In 2020, 15 photovoltaic power plants (PVPs) with an installed capacity of 364 MW were commissioned in Russia, which is 21.08% of the total installed PVP capacity of Russia. The findings of an analysis of Russia’s current regulatory and technical documents (RTD) concerning the frequency and active power flow control are presented. They indicate that all PVPs must participate in the general primary frequency control (GPFC). This requirement is due to large frequency deviations of transient processes resulting from an emergency active power shortage, which can shut down frequency-maintaining generating plants by relay or process protection devices and industrial consumers with significant damage to them. The requirements suggest full-scale tests of PVP to confirm their readiness for participation in GPFC. The program and... [more]

High energetic efficiency is a major requirement in industrial processes. The poor thermal conductivity of conventional working fluids stands as a limitation for high thermal efficiency in thermal applications. Nanofluids tackle this limitation by their tunable and enhanced thermal conductivities compared to their base fluid counterparts. In particular, carbon-based nanoparticles (e.g., carbon nanotubes, graphene nanoplatelets, etc.) have attracted attention since they exhibit thermal conductivities much greater than those of metal-oxide and metallic nanoparticles. In this work, thermal conductivity data from the literature are processed by employing rigorous statistical methodology. A high-accuracy regression equation is developed for the prediction of thermal conductivity of graphene nanoplatelet-water nanofluids, based on the temperature (15−60 °C), nanoparticle weight fraction (0.025−0.1 wt.%), and graphene nanoparticle specific surface area (300−750 m2/g). The strength of the impa... [more]

A vibration control concept based on vibration energy conversion and storage with respect to a serial-stiffness-switch system (4S) has previously been proposed. Here, we first present a rotational electromagnetic serial-stiffness-switch system as a novel practical vibration control system for experimental validation of the concept and, furthermore, an improved control strategy for higher vibration suppression performance is also proposed. The system consists of two spring-switch elements in series, where a parallel switch can block a spring. As an alternating mechanical switch, the experimental system uses two electromagnets with a shared armature. By connecting the armature to the rotating load or the base, the electromagnets decide which of the two spiral springs is blocked, while the other is active. A switching law based on the rotation velocity of the payload is used. Modelling and building of the experimental system were carried out. The corresponding experiment and simulation we... [more]

Autothermal reforming of bioethanol (ATR of C2H5OH) over promoted Ni/Ce0.8La0.2O1.9 catalysts was studied to develop carbon-neutral technologies for hydrogen production. The regulation of the functional properties of the catalysts was attained by adjusting their nanostructure and reducibility by introducing various types and content of M promoters (M = Pt, Pd, Rh, Re; molar ratio M/Ni = 0.003−0.012). The composition−characteristics−activity correlation was determined using catalyst testing in ATR of C2H5OH, thermal analysis, N2 adsorption, X-ray diffraction, transmission electron microscopy, and EDX analysis. It was shown that the type and content of the promoter, as well as the preparation mode (combined or sequential impregnation methods), determine the redox properties of catalysts and influence the textural and structural characteristics of the samples. The reducibility of catalysts improves in the following sequence of promoters: Re < Rh < Pd < Pt, with an increase in the... [more]

The main objective of the paper was comparative analyses of natural gas quantities delivered through the existing pipeline capacities in the last decade and new pipeline capacities for the prediction of possible future flows of gas import to Europe. Changes in physical flows have been influenced by European energy strategies that became green oriented resulting with a high amount of non-utilized transmission capacities. The research findings have shown that there is a significant decrease observed in transit of Russian gas through Ukraine in 2020 than previously. Concerning the high increase of LNG import to Europe in the same year, the start of operation of TurkStream, planned start of operation of Nord stream 2, authors project the gradual decrease of transit of Russian gas through Ukraine until the year 2025 with the total stop of transit of Russian gas until the year 2030. The change of supply routes will be also under the economic influence of low gas prices and coal and gas fuel... [more]

To improve the utilization of steel slag (SS) in CO2 capture and making building materials, the paper mainly discussed the effects of desulphurization gypsum (DG) and w/s ratio on strength development and CO2 capture capability of high Al content SS. It showed that 10 wt% DG enhanced the strength of hydration-curing SS by 262% at 28 days. Similarly, adding 6 wt% DG in carbonation-curing SS contributed to increases in strength and CO2 uptake by 283% and 33.54%, reaching 42.68 MPa and 19.12%, respectively. Strength decreases and CO2 uptake increases with w/s. Microanalysis (QXRD, SEM-EDS, TG-DTG, FTIR, XPS, and MIP) revealed that the main hydration products of SS were C-S-H gel and C4AH13, which transformed to ettringite with DG addition. The carbonation products were mainly calcite and aragonite. Additionally, the amount of aragonite, mechanically weaker than calcite, decreased and calcite increased significantly when DG was added in carbonation-curing samples, providing a denser struct... [more]

The prevention and evaluation of explosions requires suitable standards of measurement. As such, for this study two ignition thresholds, the ignition temperature and the minimum ignition irradiance were selected as the assessment criteria. These ignition threshold values were experimentally determined by heating stationary inert silicon carbide particles via thermal radiation with a large spot size in order to ignite quiescent methane-air fuel mixtures. A high-speed Schlieren camera was used to capture the progression of the formation and propagation of the flames throughout the experiments. The results of the experiments show that the irradiance and temperature threshold are directly and inversely proportional to the particle size, respectively. Furthermore, the irradiance and temperature thresholds have similar tendencies within the flammability limits; wherein, the minimum value corresponds to fuel mixtures at a stoichiometric ratio, and increases as the equivalence ratio shifts tow... [more]

Boosting the externalities across the water, energy, food, and waste (WEFW) sectors is challenging, especially considering tightening constraints such as population growth, climate change, resource-intensive lifestyles, increased waste production, sanitary crises and many others. The nexus approach supports the transition to a more sustainable future because intersectoral trade-offs can be reduced and externalities exploited, making imperative for decision makers, entrepreneurs, and civil society to simultaneously engage, with respect to all the components of the nexus. This research addressed intersectoral synergies and trade-offs in the case of the WEFW nexus in Romania, judging from the perspectives of entrepreneurial activity and economic results. The objective of this research was to explore the nexus in-depth by statistically analyzing the financial and economic indicators reported by active enterprises at county-level, based on the Romanian Ministry of Public Finance data. Resea... [more]

In this study, we numerically investigated the effects of design parameters, such as the strut geometry or diffusion angle, on the performance of an industrial turbine exhaust diffuser. Turbine exhaust diffusers are commonly used to change the kinetic energy of exhaust gases from the outlet of turbine stages into the static pressure. The turbine exhaust diffuser investigated in this work consisted of an annular diffuser with five identical struts equally spaced around the front circumference and a conical diffuser with a hub extension at the rear. Four design parameters were considered and several values for each parameter were tested in this study. The aerodynamic performances of the studied diffusers were evaluated according to their pressure recovery coefficients and rates of total pressure loss. Contours for the velocity, pressure, and entropy increase were plotted and compared for the various diffuser shapes. The numerical results showed that the strut thickness and the axially sw... [more]

The huge influence of the sampling rate on the performance of the digital PID control of a voltage source inverter (VSI) is revealed. It is shown that an appropriately chosen continuous-time model of a digital controller with the PWM power converter behaves like the actual discrete-time system, which allows for a simple controller analysis and design. The variable structure nature of the inverter with both the RC rectifier and an abruptly changing resistive load with two modes of operation within the sampling period is directly taken into account. Two simulation models, a discrete-time PWM and a continuous-time, of an inverter are presented, which are used to tune the PID controller and to evaluate the control performance. The behavior of the system in both modes is explained on the basis of the root loci and frequency characteristics. The results obtained for three sampling rates: 12.8, 25.6, and 51.2 kHz, are presented and compared with an actual VSI experiment. A comparison with oth... [more]

One of the methods of converting thermal energy into electricity is the use of thermoelectric generators (TEG). The method can be used in low-temperature waste heat conversion systems from industrial installations, but its serious limitation is the low efficiency of thermolectric generators and the relatively low power of the electric waveforms obtained. Increasing the obtained power values is done by multiplying the number of TEGs used, grouped into modules (MTEG). In such systems, the design of the module is extremely important, as it should ensure the best possible heat transfer between both sides of the TEG (hot and cold), and thus obtaining maximum electrical power. The article presents an analysis of a two-section flat plate heat hot side exchanger MTEG. The key parameters like effectiveness of exchange and MTEG efficiency and their impact on the efficiency of heat use and generated electric power were indicated. The tests showed an improvement in these main system parameters for... [more]

The participation of central banks in the fight against climate change has recently been advanced in several academic articles and policy papers. Since the emerging consensus is that climate change poses financial risks, the envisaged green central banking has a responsibility to address environmental sustainability as a means of promoting financial stability—an increasingly accepted goal of central banks in the post-financial crisis world. Thus far, the pro side of the argument is well represented in the literature, though often the benefits remain implicit: with the help of central banks via monetary and macroprudential policies, a smooth transition to a low-carbon economy would be somehow beneficial to all of us. With this article, we aim to add to this literature by looking at the costs and trade-offs of this course of action in light of the observation that the con side of the proposal has been only marginally addressed. We put forward a framework for the analysis of the costs and... [more]

Wind energy is a form of renewable energy with the highest installed capacity. However, it is necessary to reduce the operation and maintenance costs and extend the lifetime of wind turbines to make wind energy more competitive. This paper presents a power-derating-based Fault-Tolerant Control (FTC) model in 2 MW three-bladed wind turbines implemented using the National Renewable Energy Laboratory’s (NREL) Fatigue, Aerodynamics, Structures, and Turbulence (FAST) wind turbine simulator. This control strategy is potentially supported by the health status of the gearbox, which was predicted by means of algorithms and quantified in an indicator denominated as a merge developed by SMARTIVE, a pioneering of in this idea. Fuzzy logic was employed in order to decide whether to down-regulate the output power or not, and to which level to adjust to the needs of the turbines. Simulation results demonstrated that a reduction in the power output resulted in a safer operation, since the stresses wit... [more]

Numerical relays have become essential tools for carrying out the protection and surveillance tasks of electrical power systems. These relays implement their functions from the phasors of the electrical network signals, estimated by digital processing using digital filters. Digital filters must meet certain requirements, such as providing a fast and effective response to increasingly complex transient signals made up of components that make the estimation process difficult. In addition to the decreasing exponential (decaying dc offset), harmonics, and signal noise, it must be added that the interharmonic components that in recent years have acquired great relevance, mainly because of the increase in non-linear loads and the extensive use of power electronic systems. The presence of these interharmonic components causes a poor response in most of the filters implemented today. This article presents the design of a new digital filter, C-CharmDF (Cleaned Characteristic Harmonic Digital Fi... [more]

California has set two ambitious targets aimed at achieving a high level of decarbonization in the coming decades, namely (i) to generate 60% and 100% of its electricity using renewable energy (RE) technologies, respectively, by 2030 and by 2045, and (ii) introducing at least 5 million zero emission vehicles (ZEVs) by 2030, as a first step towards all new vehicles being ZEVs by 2035. In addition, in California, photovoltaics (PVs) coupled with lithium-ion battery (LIB) storage and battery electric vehicles (BEVs) are, respectively, the most promising candidates for new RE installations and new ZEVs, respectively. However, concerns have been voiced about how meeting both targets at the same time could potentially negatively affect the electricity grid’s stability, and hence also its overall energy and carbon performance. This paper addresses those concerns by presenting a thorough life-cycle carbon emission and energy analysis based on an original grid balancing model that uses a combin... [more]

The residential building stock represents one of the major players in energy use and greenhouse gas emissions; thus, it is fundamental to reduce the energy used. Simulation tools are becoming more and more accurate in compliance with the new requirements both at the single-building and at the district scale, although they are not affordable by non-specialist users such as policymakers. The research concerns the evaluation of the energy demand for space heating for a historical district that is representative of the Italian building stock. The work compares dynamic and specialist-oriented urban scale tools such as Energy Urban Resistance Capacitance Approach (EUReCA) and City Energy Analyst (CEA)) as well as a quasi-steady-state calculation method (Excel spreadsheet), which is more affordable for non-specialist users. The work was carried out to assess the possible deviation of the results between the dynamic and quasi-steady-state calculation methods, as well as to identify any limits... [more]

The purpose of this study is to evaluate the optimal earthquake intensity measures (IMs) for probabilistic seismic demand models (PSDMs) of the base-isolated nuclear power plant (NPP) structures. The numerical model of NPP structures is developed using a lumped-mass stick model, in which a bilinear model is employed to simulate the force-displacement relations of base isolators. In this study, 20 different IMs are considered and 90 ground motion records are used to perform time-history analyses. The seismic engineering demand parameters (EDPs) are monitored in terms of maximum floor displacement (MFD), the maximum floor acceleration (MFA) of the structures, and maximum isolator displacement (MID). As a result, a set of PSDMs of the base-isolated structure is developed based on three EDPs (i.e., MFD, MFA, and MID) associated with 20 IMs. Four statistical parameters including the coefficient of determination, efficiency (i.e., standard deviation), practicality, and proficiency are then c... [more]

This paper provides a modeling approach for average current control (ACC) operating in open-loop configuration. The converters chosen are non-ideal boost and synchronous boost converters operating in continuous conduction mode (CCM). Initially, these converters are mathematically modeled considering all the non-idealities using volt-sec and amp-sec balance equations and simulated using MATLAB and Simulink. The open-loop transfer function of the switch current or inductor current (Gid) to the duty ratio is derived using the state space averaging (SSA) technique and analyzed using MATLAB/Simulink. It is observed that the Gid of the converters is highly stable in open loop. A larger magnitude resonance is observed in ideal boost and synchronous boost converters than the non-ideal converters. However, the low frequency gain and the crossover frequency remained the same. With the increase in the load resistance, higher resonance and lower low frequency gain is observed in non-ideal boost an... [more]

The article presents the results of the application of an original methodology for designing residential buildings with a positive energy balance in accordance with the principles of sustainable development. The methodology was verified using a computational example involving the selection of a compromise solution for a single-family residential building with a positive energy balance located in Warsaw, Poland. Three different models of decision-makers’ preferences were created, taking into account selected decision sub-criteria. Three technical solutions were identified, permissible according to the principles and guidelines for designing buildings with a positive energy balance. As a result of the performed calculations, the final order of the analyzed variants was obtained, from the most preferred to the least accepted solution. Variant 2 is definitely the most advantageous solution, being the best in a group of 20 to 26 evaluation sub-criteria—depending on the adopted model of the... [more]

Hybrid hydro energy systems are usually analysed with pumped hydro storage systems, which can facilitate energy accumulation from other sources. Despite the lack of water storage, run-of-the-river hydropower plants are also attractive for hybrid systems owing to their low investment cost, short construction time, and small environmental impact. In this study, a hybrid system that contains run-of-the-river small hydro power plants (SHPs), PV systems, and batteries to serve local loads is examined. Low-power and low-head schemes that use variable-speed operation are considered. The novelty of this study is the proposal of a dedicated steady-state model of the run-of-the-river hydropower plant that is suitable for energy production analysis under different hydrological conditions. The presented calculations based on a real SHP of 150 kW capacity have shown that a simplified method can result in a 43% overestimation of the produced energy. Moreover, a one-year analysis of a hybrid system o... [more]

In this paper, a chance-constrained (CC) framework is developed to manage the voltage control problem of medium-voltage (MV) distribution systems subject to model uncertainty. Such epistemic uncertainties are inherent in distribution system analyses given that an exact model of the network components is not available. In this context, relying on the simplified deterministic models can lead to insufficient control decisions. The CC-based voltage control framework is proposed to tackle this issue while being able to control the desired protection level against model uncertainties. The voltage control task disregarding the model uncertainties is firstly formulated as a linear optimization problem. Then, model uncertainty impacts on the above linear optimization problem are evaluated. This analysis defines that the voltage control problem subject to model uncertainties should be modelled with a joint CC formulation. The latter is accordingly relaxed to individual CC optimizations using the... [more]

The next generation of nuclear energy systems, also known as Generation IV reactors, are being developed to meet the highest targets of safety and reliability, sustainability, economics, proliferation resistance, and physical protection, with improved performances compared with the currently licensed plants or those presently being built. Among the proposed technologies, lead-cooled fast reactors (LFRs) have been identified by nuclear industries in both Western and developing countries as being among the optimal Generation IV candidates. Since 2000, ENEA, the Italian National Agency for New Technologies, Energy, and Sustainable Economic Development is supporting the core design, safety assessment, and technological development of innovative nuclear systems cooled by heavy liquid metals (HLM) and, most recently, fully oriented on LFRs. ENEA is developing world-recognized skills in fast spectrum core design and is one of the largest European fleets of experimental facilities aiming at in... [more]

This paper presents a comprehensive review of the developments made in rotating bearing fault diagnosis, a crucial component of a rotatory machine, during the past decade. A data-driven fault diagnosis framework consists of data acquisition, feature extraction/feature learning, and decision making based on shallow/deep learning algorithms. In this review paper, various signal processing techniques, classical machine learning approaches, and deep learning algorithms used for bearing fault diagnosis have been discussed. Moreover, highlights of the available public datasets that have been widely used in bearing fault diagnosis experiments, such as Case Western Reserve University (CWRU), Paderborn University Bearing, PRONOSTIA, and Intelligent Maintenance Systems (IMS), are discussed in this paper. A comparison of machine learning techniques, such as support vector machines, k-nearest neighbors, artificial neural networks, etc., deep learning algorithms such as a deep convolutional network... [more]

A robust and reliable method for fabricating porous anodic alumina (PAA)-based distributed Bragg reflectors (DBRs), operating in mid-infrared (MIR) spectral region, is presented. The method relies on application of high (UH) and low (UL) voltage pulse sequence repeated in cycles. PAA-based DBR consists of alternating high-(dH) and low-porosity (dL) layers translated directly into periodically varied refractive index. Two anodization modes were used: time- and charge density-controlled mode. The former generated dH + dL pairs with non-uniform thickness (∆d) and effective refractive index (∆neff). It is supposed, that owing to a compensation effect between the ∆d and ∆n, the photonic stopbands (PSBs) were symmetrical and intensive (transmittance close to zero). Under the charge density-controlled mode dH + dL pairs of uniform thickness were formed. However, the remaining ∆neff provided an asymmetrical broadening of PSBs. Furthermore, it is demonstrated that the spectral position of the P... [more]