The European Union (EU) energy policy for sustainable development has been the topic of continuous debate, research, and analysis, which frequently focused on objectives and the evaluation of quantitative and qualitative performance. Different approaches can be used for the assessment of sustainable development goals. The authors of the article conducted a literature review of relevant research papers dated 2016−2020. The most common are quantitative methods based on hard data. Some qualitative studies based on soft data are also available but rare. This article proposes hybrid Rough Set Data Envelopment Analysis (DEA) and Rough Set Network DEA models that integrate both approaches. Also, the models allow the inclusion of uncertainty in the underlying data. The article uses hard data of the International Energy Agency (IEA) and the results of the EU survey regarding the influence of the socio-economic environment on CO2 emissions in EU countries. The authors demonstrate that multifacet... [more]

This paper proposes a near to real-time local market to provide reactive power to the transmission system operator (TSO), using the resources connected to a distribution grid managed by a distribution system operator (DSO). The TSO publishes a requested reactive power profile at the TSO-DSO interface for each time-interval of the next delivery period, so that market agents (managing resources of the distribution grid) can prepare and send their bids accordingly. DSO resources are the first to be mobilized, and the remaining residual reactive power is supplied by the reactive power flexibility offered in the local reactive market. Complex bids (with non-curtailability conditions) are supported to provide flexible ways of bidding fewer flexible assets (such as capacitor banks). An alternating current (AC) optimal power flow (OPF) is used to clear the bids by maximizing the social welfare to supply the TSO required reactive power profile, subject to the DSO grid constraints. A rolling win... [more]

The energy sector is currently undergoing a rapid transformation with the integration of power electronic converter (PEC)-interfaced renewable energy sources (RES), such as wind and solar photovoltaic (PV) systems, at both the transmission and distribution networks. Power system stability has been significantly influenced by this power grid transformation. This paper comprehensively reviews major power system stability issues affected due to large-scale integration of PEC-interfaced RES in power grids, with some example case studies relevant for each stability category. According to the review, stability issues are mainly originating from reduction in synchronous inertia, reduction in reactive power reserve, low short-circuit strength of the power network, and fault ride-through (FRT) strategy/capability of the PEC-interfaced RES. Decrease in synchronous inertia could affect both the rotor angle stability and the frequency stability, while decrease in short-circuit strength and reactiv... [more]

The increasing presence of distributed generation (DG) in the electrical grid determines new challenges in grid operations, especially in terms of voltage and frequency regulation. Recently, several grid codes have required photovoltaic (PV) inverters to control their reactive power output in order to provide voltage regulation services, and the allocation of a certain amount of active power reserve for fast frequency response (FFR) service during under-frequency contingencies is needed. This requirement involves a significant waste of energy for PV systems, due to the necessity to constantly operate in de-loaded mode, under normal operating conditions. In addition, the variability of the irradiance can affect the correct amount of active power reserve that the system can provide in the moments after an under-frequency occurrence. The increasing number of battery energy storage systems (BESSs), coupled to PV systems, can be used to provide a worthy contribution to this frequency regula... [more]

Home energy management systems (HEMS) are a key technology for managing future electricity distribution systems as they can shift household electricity usage away from peak consumption times and can reduce the amount of local generation penetrating into the wider distribution system. In doing this they can also provide significant cost savings to domestic electricity users. This paper studies a HEMS which minimizes the daily energy costs, reduces energy lost to the utility, and improves photovoltaic (PV) self-consumption by controlling a home battery storage system (HBSS). The study assesses factors such as the overnight charging level, forecasting uncertainty, control sample time and tariff policy. Two management strategies have been used to control the HBSS; (1) a HEMS based on a real-time controller (RTC) and (2) a HEMS based on a model predictive controller (MPC). Several methods have been developed for home demand energy forecasting and PV generation forecasting and their impact o... [more]

This article presents a methodology for building an AGV (automated guided vehicle) power supply system simulation model with a polymer electrolyte membrane fuel cell stack (PEMFC). The model focuses on selecting the correct parameters for the hybrid energy buffering system to ensure proper operating parameters of the vehicle, i.e., minimizing vehicle downtime. The AGV uses 2 × 1.18 kW electric motors and is a development version of a battery-powered vehicle in which the battery has been replaced with a hybrid power system using a 300 W PEMFC. The research and development of the new power system were initiated by the AGV manufacturer. The model-based design (MBD) methodology is used in the design and construction of a complete simulation model for the system, which consists of the fuel cell system, energy processing, a storage system, and an energy demand models. The energy demand model has been developed based on measurements from the existing AGV, and the remaining parts of the model... [more]

Charging a group of series-connected batteries of a PV-battery hybrid system exhibits an imbalance issue. Such imbalance has severe consequences on the battery activation function and the maintenance cost of the entire system. Therefore, this paper proposes an active battery balancing technique for a PV-battery integrated system to improve its performance and lifespan. Battery state of charge (SOC) estimation based on the backpropagation neural network (BPNN) technique is utilized to check the charge condition of the storage system. The developed battery management system (BMS) receives the SOC estimation of the individual batteries and issues control signal to the DC/DC Buck-boost converter to balance the charge status of the connected group of batteries. Simulation and experimental results using MATLAB-ATMega2560 interfacing system reveal the effectiveness of the proposed approach.

The emergence of Internet of Things (IoT) architectures and applications has been the driver for a rapid growth in wireless technologies for the Machine-to-Machine domain. In this context, a crucial role is being played by the so-called Low Power Wide Area Networks (LPWANs), a bunch of transmission technologies developed to satisfy three main system requirements: low cost, wide transmission range, and low power consumption. This last requirement is especially crucial as IoT infrastructures should operate for long periods on limited quantities of energy: to cope with this limitation, energy harvesting is being applied every day more frequently, and several different techniques are being tested for LPWAN systems. The aim of this survey paper is to provide a detailed overview of the the existing LPWAN systems relying on energy harvesting for their powering. In this context, the different LPWAN technologies and protocols will be discussed and, for each technology, the applied energy harves... [more]

The ongoing diffusion of solid-state DC/DC converters makes possible a partial migration of electric power systems from the present AC paradigm to a future DC scenario. In addition, the power demand in the domestic environment is expected to grow considerably, for example, due to the progressive diffusion of electric vehicles, induction cooking and heat pumps. To face this evolution, the paper introduces a novel electric topology for a hybrid AC/DC smart house, based on the solid-state transformer technology. The electric scheme, voltage levels and converters types are thoroughly discussed to better integrate the spread of electric appliances, which are frequently based on internal DC buses, within the present AC distribution networks. Voltage levels are determined to guarantee high safety zones with negligible electric risk in the most exposed areas of the house. At the same time, the developed control schemes assure high power quality (voltage stability in the case of both load varia... [more]

Survivability assessment is the complexity compromising Wave energy development. The present study develops a hybrid model aiming to reduce computational power while maintaining accuracy for survivability assessment of a Point-Absorber (PA) Wave Energy Converter (WEC) in extreme Wave Structure Interaction (WSI). This method couples the fast inviscid linear potential flow time-domain model WaveDyn (1.2, DNV-GL, Bristol, UK) with the fully nonlinear viscous Navier−Stokes Computational Fluid Dynamics (CFD) code OpenFOAM (4.2, OpenFOAM.org, London, UK). The coupling technique enables the simulation to change between codes, depending on an indicator relating to wave steepness identified as a function of the confidence in the linear model solution. During the CFD part of the simulation, the OpenFOAM solution is returned to WaveDyn via an additional load term, thus including viscous effects. Developments ensure a satisfactory initialisation of CFD simulation to be achieved from a ‘hot-start’... [more]

In this work are presented experimental values of the burning velocity of iso-octane/air, n-heptane/air and n-heptane/toluene/air mixtures, gasoline surrogates valid over a range of pressures and temperatures similar to those obtained in internal combustion engines. The present work is based on a method to determine the burning velocities of liquid fuels in a spherical constant volume combustion bomb, in which the initial conditions of pressure, temperature and fuel/air equivalence ratios can be accurately established. A two-zone thermodynamic diagnostic model was used to analyze the combustion pressure trace and calculate thermodynamic variables that cannot be directly measured: the burning velocity and mass burning rate. This experimental facility has been used and validated before for the determination of the burning velocity of gaseous fuels and it is validated in this work for liquid fuels. The values obtained for the burning velocity are expressed as power laws of the pressure, t... [more]

This study describes the development of a multifunctional solar system designed for implementation in some communities in the Meseta Purepecha, Michoacan, Mexico. The multifunctional solar system device—called T’imani (in the Purepecha language)— consists of two modules designed for domestic use: one for cooking food, the other for heating water. The thermal characterization is based on the use of standardized tests for both modules. The parameters obtained indicate that use device is suitable for in the conditions of solar resources in this region. Additionally, a pilot test was carried out to implement some devices that show favorable preliminary results for domestic use. Hence, due to the device functionality and that in Mexico there is abundant solar resources it is feasible to implement the device in many places throughout the country.

As cities develop new interventions for climate change mitigation, incorporating renewable energy in urban public spaces becomes a common norm to address sustainability objectives. However, current built projects and assessment practices mainly uses a “techno-fixes” approach focusing on strategies that are related to the environmental benefits and neglecting other potential strategies instigating social and economic benefits of renewable energy. The purpose of this study is to present a potential sustainability assessment model introducing new strategies for public space renewable energy use where social and economic benefits of renewables become evident. Supplemented with theories and principles from ecology, the model’s economic strategies refer whether the project considers meaningful part of the produced electricity for generating a local economy; environmental strategy comprises embodied energy, energy storage and self-maintenance; social strategy includes whether the project cons... [more]

Wind power has been increasing its participation in electricity markets in many countries around the world. Due to its economical and environmental benefits, wind power generation is one of the most powerful technologies to deal with global warming and climate change. However, as wind power grows, uncertainty in power supply increases due to wind intermittence. In this context, accurate wind power scenarios are needed to guide decision-making in power systems. In this paper, a novel methodology to generate realistic wind power scenarios for the long term is proposed. Unlike most of the literature that tackles this problem, this paper is focused on the generation of realistic wind power production scenarios in the long term. Moreover, spatial-temporal dependencies in multi-area markets have been considered. The results show that capturing the dependencies at the monthly level could improve the quality of scenarios at different time scales. In addition, an evaluation at different time sc... [more]

This study aimed to analyse financial liberalisation, political stability, and economic determinants of Kenya’s real economic growth using time series data over the period of 1970−2016. The authors specified quadratic and interactive models to be estimated by employing a quantile regression analysis. The traditional and quantile unit root test was used in testing the stationarity issue. The co-integration findings indicated that the capital account openness and financial development impede on real economic growth; and the political stability also had potential influence on the real economic growth of Kenya. Interestingly, there is a nonlinear U-shape link between financial development and real economic growth that undermined the real economic growth at its onset, but as it advanced, it enhanced the growth of the country in the long run. The policymakers should ensure that the capital account is more liberalised so that it will continue to stimulate the financial development. In the sam... [more]

Improvement of the energy efficiency of public buildings appears to be one of the best ways to simultaneously reduce energy consumption as well as the negative impacts on the environment. The work is dedicated to the analysis of modernization process of the energy system in a sports facility in a way leading to design of smart energy system. The proposed solution, being a specific case study, offers optimal use of energy in the facility, significantly reducing the demand for energy derived from fossil fuels (heat providers and conventional power plants). The project, on its first step, consists of recovering energy from sewage that usually is irretrievably lost. This option allows to achieve the assumed goals simultaneously optimizing the investment costs. The proposed solution mitigates air pollution and harmful gas and dust emissions to the atmosphere, and contributes to an increase of both the attractiveness and competitiveness of the area in which the sports facility is located. Th... [more]

In order to overcome anaerobic digestion (AD) inhibition due to the large nitrogen content of swine wastewater (SW), air stripping (AS) and other chemical and physical pretreatments were applied on raw SW before AD. The efficiency of these pretreatments on both ammonia removal—recovering ammonia salts to be used as fertilizers in agriculture—and the increase of methane production were assessed in batch tests. Since the pH, temperature, and air flow rate heavily influence AS efficiency and the composition of treated SW, these parameters were set individually or in combination. In more detail, the pH was increased from the natural value of SW to 8 or 10, temperature was increased from the room value to 40 °C, and the air flow rate was increased from zero to 5 Lair LSW−1 min−1. AS was generally more efficient at removing ammonia (up to 97%) from raw (non-treated) SW compared to the other treatments. However, the tested pretreatments were not as efficient as expected in increasing the biog... [more]

This paper proposes a two-stage smart charging algorithm for future buildings equipped with an electric vehicle, battery energy storage, solar panels, and a heat pump. The first stage is a non-linear programming model that optimizes the charging of electric vehicles and battery energy storage based on a prediction of photovoltaïc (PV) power, building demand, electricity, and frequency regulation prices. Additionally, a Li-ion degradation model is used to assess the operational costs of the electric vehicle (EV) and battery. The second stage is a real-time control scheme that controls charging within the optimization time steps. Finally, both stages are incorporated in a moving horizon control framework, which is used to minimize and compensate for forecasting errors. It will be shown that the real-time control scheme has a significant influence on the obtained cost reduction. Furthermore, it will be shown that the degradation of an electric vehicle and battery energy storage system are... [more]

With increasing mean and extreme temperatures due to climate change, it becomes necessary to use—not only future typical conditions—but future heatwaves in building thermal simulations as well. Future typical weather files are widespread, but few researchers have put together methodologies to reproduce future extreme conditions. Furthermore, climate uncertainties need to be considered and it is often difficult due to the lack of data accessibility. In this article, we propose a methodology to re-assemble future weather files—ready-to-use for building simulations—using data from the European Coordinated Regional Downscaling Experiment (EURO-CORDEX) dynamically downscaled regional climate multi-year projections. It is the first time that this database is used to assemble weather files for building simulations because of its recent availability. Two types of future weather files are produced: typical weather years (TWY) and heatwave events (HWE). Combined together, they can be used to ful... [more]

Energy management and control of hybrid microgrids is a challenging task due to the varying nature of operation between AC and DC components which leads to voltage and frequency issues. This work utilizes a metaheuristic-based vector-decoupled algorithm to balance the control and operation of hybrid microgrids in the presence of stochastic renewable energy sources and electric vehicles charging structure. The AC and DC parts of the microgrid are coupled via a bidirectional interlinking converter, with the AC side connected to a synchronous generator and portable AC loads, while the DC side is connected to a photovoltaic system and an electric vehicle charging system. To properly ensure safe and efficient exchange of power within allowable voltage and frequency levels, the vector-decoupled control parameters of the bidirectional converter are tuned via hybridization of particle swarm optimization and artificial physics optimization. The proposed control algorithm ensures the stability o... [more]

The continuous development of fifth generation (5G) communication and Internet of Thing (IoT) inevitably necessitates more advanced systems that can satisfy the growing wireless data rate demand of future equipment. Device-to-Device (D2D) communication, whose performance is evaluated in terms of the overall throughput, energy efficiency (EE) and spectral efficiency (SE), is considered a promising solution for the aforementioned problem. Thereby, this paper aims at improving the performance of the D2D communication underlaying cellular networks operating on multiple bands by maximizing the EE in its uplink. Thanks to the stochastic geometry theory, it is possible to derive the closed-form expressions for the successful transmission probability (STP), the total average transmission rate (TATR), and the total average energy efficiency (TAEE) of cellular and D2D users in different time slot setting. Particularly investigated and compared in this study, there are one-hop, direct, D2D commun... [more]

The world’s energy demand is steadily increasing where it has now become difficult for conventional hydrocarbon reservoir to meet levels of demand. Therefore, oil and gas companies are seeking novel ways to exploit and unlock the potential of unconventional resources. These resources include tight gas reservoirs, tight sandstone oil, oil and gas shales reservoirs, and high pressure high temperature (HPHT) wells. Drilling of HPHT wells and shale reservoirs has become more widespread in the global petroleum and natural gas industry. There is a current need to extend robust techniques beyond costly drilling and completion jobs, with the potential for exponential expansion. Drilling fluids and their additives are being customized in order to cater for HPHT well drilling issues. Certain conventional additives, e.g., filtrate loss additives, viscosifier additives, shale inhibitor, and shale stabilizer additives are not suitable in the HPHT environment, where they are consequently inappropria... [more]

The paper presents the results of a 3D FEA simulations series of a dual air gap Axial Flux (AF) electric machine with Surface-Mounted Permanent magnets (SPM) with parameterized rotor geometry. Pole number and pole span influence on back-emf, as well as cogging and ideal electromagnetic torques angular characteristics were investigated for each model with the common segmented yokeless stator with concentric windings. Synchronous and BLDC drives supply were used to estimate back-emf distortion. Ideal torque ripple and cogging torque spectra were analyzed. It was concluded that the number of poles closer to the number of slots with ~0.8 pole span tends to yield good torque density with the lowest cogging torque, back-emf distortion and ideal torque ripple.

Carbonation lime mud is a by-product formed during the production of sugar in the process of raw beetroot juice purification. On average, during one campaign, over 12,000 tons of carbonation lime mud is obtained in the operation of one sugar production plant. It is stored in prisms, which negatively affects the environment. The chemical properties of carbonation lime mud allow using it as a soil improver. This article presents the results of research into the development of carbonation lime mud disposal technology and its management. The chemical composition and physical properties of waste were determined. It has been proposed to use carbonation lime mud as the basic raw material in the production of mineral−organic fertilizers. Tests were conducted in a disc granulator. The granulated material was wetted with water and aqueous solution of molasses. Carbonation lime mud is a material that is easily subjected to the granulation process, using any wetting liquid. The beds wetted with 33... [more]

The paper firstly summarizes a simple analytical model of the air gap flux-density distribution for isotropic permanent magnet (PM) synchronous machines, in the presence of static eccentricity. The model was proposed by the authors in a previous paper and is based on an efficacious analytical expression of the variable length of air gap magnetic field lines which occur in eccentric brushless machines with surface-mounted permanent magnets. The approximate expression of the air gap field makes it possible to achieve a mathematical model with concentrated parameters close to that of a PM machine without eccentricity. The expression of the armature voltages and electromagnetic torque are found, also with reference to steady-state operating conditions at fixed rotor speed and impressed currents. The differences introduced by the considered type of eccentricity are evaluated and highlighted especially with reference to the air gap inductance and to waveforms and frequency spectra of voltage... [more]