The subsea production control system, characterized by a complex and diverse structure and high cost, is one of the essential parts of a subsea production system. The rational layout of the subsea production control system is essential to reduce development costs and ensure safe production in offshore fields. Most previous studies on layout design in offshore fields have focused on the oil- and gas-gathering system. However, the layout of the subsea production control system has not thoroughly been researched to date and the seabed terrain and integral optimization have rarely been discussed. This paper focuses on the multi-layer star structure and multi-layer star-tree structure, two common layout structures of subsea production control systems, and establishes the corresponding model with obstacle and seabed terrain conditions. Obtaining the lowest possible total cost was the aim of the model. A hybrid algorithm combining the adaptive mutation particle swarm algorithm and the A-star... [more]

Every year, large amounts of selective catalytic reduction (SCR) catalysts with losing catalytic activity and failing to be regenerated need to be regenerated, which will result in acute pollution. Recycling valuable metals from spent SCR catalysts can not only solve environmental problems, but also save resources. The process of sodium roasting and water leaching is able to effectively extract vanadium (V) and tungsten (W) from spent SCR catalysts. To improve the efficiencies of V and W, different sodium additives were first investigated in the roasting process. The results revealed that the process of NaCl-NaOH composite roasting and water leaching showed superior leaching efficiencies of V and W, which can reach 91.39% and 98.26%, respectively, and simultaneously, it can be found that adding low melting point NaOH promoted mass transfer as compared with the melting points of different sodium additives. Next, a single-factor experiment was conducted to investigate different roasting... [more]

In this paper, internal division point genetic algorithm (IDP-GA) was proposed to lessen the computational burden of multi-variable multi-objective optimization problem using finite element analysis such as optimal design of electric bicycles. The IDP-GA could consider various objectives with normalized weighted sum method and could reduce the number of function calls with novel crossover strategy and vector-based pattern search method. The superiority of the proposed algorithm was verified by comparing performances with conventional optimization method at two mathematical test functions. Finally, the applicability of the IDP-GA in practical electric machine design was verified by successfully deriving an improved design of electric bicycle propulsion motor.

The effective separation of CO2 and CH4 mixtures is essential for many applications, such as biogas upgrading, natural gas sweetening or enhanced oil recovery. Membrane separations can contribute greatly in these tasks, and innovative membrane materials are being developed for this gas separation. The aim of this work is the evaluation of the potential of two types of highly CO2-permeable membranes (modified commercial polydimethylsiloxane and non-commercial ionic liquid−chitosan composite membranes) whose selective layers possess different hydrophobic and hydrophilic characteristics for the separation of CO2/CH4 mixtures. The study of the technical performance of the selected membranes can provide a better understanding of their potentiality. The optimization of the performance of hollow fiber modules for both types of membranes was carried out by a “distance-to-target” approach that considered multiple objectives related to the purities and recovery of both gases. The results demonst... [more]

Electrochemical impedance spectroscopy (EIS) is an important electrochemical technique that is used to detect changes and ongoing processes in a given material. The main challenge of EIS is interpreting the collected measurements, which can be performed in several ways. This article focuses on the electrical equivalent circuit (EEC) approach and uses grammatical evolution to automatically construct an EEC that produces an AC response that corresponds to one obtained by the measured electrochemical process(es). For fitting purposes, synthetic measurements and data from measurements in a realistic environment were used. In order to be able to faithfully fit realistic data from measurements, a new circuit element (ZARC) had to be implemented and integrated into the SPICE simulator, which was used for evaluating EECs. Not only is the presented approach able to automatically (i.e., with almost no user input) produce a more than satisfactory EEC for each of the datasets, but it also can also... [more]

As an advanced oxidative processes, the Fenton process is receiving popularity as a wastewater treatment technique that can be used for hazardous landfill leachate. The treatment is simple, yet involves complex interactions between the affecting parameters including reaction time, H2O2/Fe2+ ratio, pH, and iron (II) ion concentration. Hence, the purpose of this present study was to analyze the factors affecting landfill leachate treatment as well as their interaction by means of response surface methodology (RSM) with central composite design. The independent variables were reaction time, H2O2/Fe2+ ratio, iron (II) ion concentration, and pH, and the dependent variable (response) was color-removal percentage. The optimum treatment conditions for pH, H2O2/Fe2+ ratio, Fe2+ concentration, and reaction time were 8.36, 3.32, 964.95 mg/L, and 50.15 min, respectively. The model predicted 100% color removal in optimum conditions, which was close to that obtained from the experiment (97.68%). In... [more]

Industrial experiments of mechanical soft reduction in continuous casting were conducted in the present study aiming to improve the internal quality of the bearing steel blooms. Two methods were developed to verify the solidification model for a reliable crater end in the caster, which is provided by SMS CONCAST. The verified solidification model was applied to determine the solidification status of the bloom and provides theoretical reduction region. Several trials were conducted to study the optimization of the reduction rate regarding the V-shaped and centerline segregation of the bloom. The results show an obvious improvement of internal quality in the bearing steel bloom by applying appropriate reduction during casting.

Moth−flame optimization (MFO) is a prominent swarm intelligence algorithm that demonstrates sufficient efficiency in tackling various optimization tasks. However, MFO cannot provide competitive results for complex optimization problems. The algorithm sinks into the local optimum due to the rapid dropping of population diversity and poor exploration. Hence, in this article, a migration-based moth−flame optimization (M-MFO) algorithm is proposed to address the mentioned issues. In M-MFO, the main focus is on improving the position of unlucky moths by migrating them stochastically in the early iterations using a random migration (RM) operator, maintaining the solution diversification by storing new qualified solutions separately in a guiding archive, and, finally, exploiting around the positions saved in the guiding archive using a guided migration (GM) operator. The dimensionally aware switch between these two operators guarantees the convergence of the population toward the promising zo... [more]

Digital transformation has become one of the major themes of the development of the global oil industry today. With the development of digital transformation, on-site production will surely achieve further automated management, that is, on-site production data automatic collection, real-time tracking, diagnosis and optimization, and remote control of on-site automatic adjustment devices. In this process, the realization of real-time optimization work based on massive data collection needs to be carried out combined with oil and gas well transient simulation. Therefore, research of the horizontal well capacity prediction transient model is one of the important basic works in the work of oil and gas digital transformation. In this paper, the method and process of establihing the transient calculation model of single-phase flow in horizontal wells are introduced in detail from three aspects: reservoir seepage, horizontal wellbore flow (taking one kind of flow as an example), and the coupl... [more]

Exchange rate forecasting is a crucial but challenging task due to the uncertainty and fuzziness of the associated data caused by complex influence factors. However, most traditional forecasting methods ignore the ambiguity of the data itself. Thus, in this paper, a novel fuzzy time series forecasting system based on a combined fuzzification strategy and an advanced optimization algorithm was proposed for use in exchange rate forecasting, and was proven to have an excellent ability to deal with the uncertainties and ambiguities in data. Concretely, the data “decomposition and ensemble” strategy was applied to carry out the data preprocessing process. The combined fuzzification strategy was used in the fuzzification of the observed data, and the advanced optimization algorithm was developed to determine the optimal parameters in the models. The analysis of this experiment verified the effectiveness of the proposed forecasting system, which will benefit future research and decision-makin... [more]

Due to various environmental regulations, the demand for natural gas, i.e., a clean energy, is expected to increase continuously. In terms of efficient storage and transportation of natural gas, liquefied natural gas has an advantageous volume of 1/600 compared to natural gas, but the materials that can be used at a cryogenic temperature of −163 °C are limited. A 9% nickel steel is a material recommended by IMO through IGC. It has excellent mechanical properties compared to other cryogenic materials, but its use has been limited due to its disadvantages in arc welding. Therefore, the main topic of this study is the automatic welding of 9% nickel steel using fiber laser and its purpose is to predict the welding deformation during fiber laser welding. First, an investigation was conducted to find the fiber laser welding heat source. A model that can cover all the models in prior studies such as curve, exponential, conical, conical-conical combination, and conical-cylinder combination mod... [more]

Intelligent Transportation system are becoming an interesting research area, after Internet of Things (IoT)-based sensors have been effectively incorporated in vehicular ad hoc networks (VANETs). The optimal route discovery in a VANET plays a vital role in establishing reliable communication in uplink and downlink direction. Thus, efficient optimal path discovery without a loop-free route makes network communication more efficient. Therefore, this challenge is addressed by nature-inspired optimization algorithms because of their simplicity and flexibility for solving different kinds of optimization problems. NIOAs are copied from natural phenomena and fall under the category of metaheuristic search algorithms. Optimization problems in route discovery are intriguing because the primary objective is to find an optimal arrangement, ordering, or selection process. Therefore, many researchers have proposed different kinds of optimization algorithm to maintain the balance between intensifica... [more]

Aiming at the problems of high-power consumption and insufficient kneading and cutting of roughage in the total mixed ration mixer. In this paper, licorice stems were taken as experimental objects, the horizontal twin-shaft TMR mixer was used to carry out the experimental study. It should be as brief as possible and concise. Through the kneading and cutting process power analysis, determine the influencing factors of kneading and cutting power consumption. The auger speed, processing time and blade type were taken as experimental factors, with standard straw length rate and power consumption as indicators, Box−Behnken test with three factors and three levels was carried out, analysis of variance was performed on the test results, the results show that the significant effect of each factor on the standard grass length is processing time, blade type and auger speed in descending order. The significance of the influence on power consumption from large to small is auger speed, processing t... [more]

A novel method proposed to choose the optimal working fluid—solely from the point of view of expansion route—for a given heat source and heat sink (characterized by a maximum and minimum temperature). The basis of this method is the novel classification of working fluids using the sequences of their characteristic points on temperature-entropy space. The most suitable existing working fluid can be selected, where an ideal adiabatic (isentropic) expansion step between a given upper and lower temperature is possible in a way, that the initial and final states are both saturated vapour states and the ideal (isentropic) expansion line runs in the superheated (dry) vapour region all along the expansion. Problems related to the presence of droplets or superheated dry steam in the final expansion state can be avoided or minimized by using the working fluid chosen with this method. Results obtained with real materials are compared with those gained with model (van der Waals) fluids; based on t... [more]

The high-stress hazards of underground engineering have stimulated the exploration of microseismic monitoring and early warning methods. To achieve a good monitoring effect, the monitoring object is usually enclosed by a microseismic array (sensor array) (e.g., slope engineering, etc.). However, some characteristics of a buried tunnel, including “linear”, “deep-buried”, and “long”, make it difficult to deploy a reasonable microseismic array, which leads to the microseismic array being non-enclosed for the monitoring object. Application of the non-enclosed microseismic array yields decreases the accuracy of the source location. To solve the problem wisely, this paper deals with the feasibility of non-enclosed microseismic arrays (axial-extended, lateral-extended, and twin-tube arrays) by introducing a quantitative method. To this end, an optimized microseismic array with the best source location accuracy for a twin-tube expressway tunnel is proposed. The obtained results reveal that the... [more]

In order to study the contribution of each harmonic to the output torque and axial torque of the axial magnetic gear with Halbach permanent magnet arrays (HAMG), torque and axial force calculation formulas of the HAMG are proposed based on the air-gap flux density distribution of the HAMG. Because of the difference of the air-gap flux densities at different radii, two simplified torque and axial force calculation formulas are proposed and compared. To improve the torque capability of the HAMG, parametric analysis of eight dimensional parameters is firstly conducted. By parametric analysis, six parameters such as the inner radius have been found to have obvious impact on the output torque and output torque density of the HAMG. The optimization using Maxwell software is then executed for maximizing the output torque density of the HAMG. The output torque density of the optimized HAMG is improved from 78.1 kNm/m3 to 93.3 kNm/m3 with an increase of 19%. Furthermore, spectrum analysis is al... [more]

A data-driven workflow approach is presented in this study for optimizing fracture spacing of multifractured horizontal wells (MFHW) in shale oil reservoirs. The workflow employs a simple well productivity model for the initial design of hydraulic fracturing well completions. This provides a transparent approach to the identification of key fracturing parameters affecting well productivity. The workflow uses transient pressure or production data to identify fracture interference. This offers a reliable and cost-effective means for assessment of well production potential in terms of optimization of fracture spacing in the MFHW. Result of a field case study indicated that three wells were drilled in an area with dense natural fractures, and the fracture spacing of MFHW in this area was short enough to effectively drain the stimulated reservoir volume (SRV), while the other three wells were drilled in an area with less natural fractures, and the fracture spacing of MFHW in this area could... [more]

Offshore wind power has become an important trend in global renewable energy development. Based on a particle swarm optimization (PSO) algorithm and FAST program, a time-domain coupled calculation model for a floating wind turbine is established, and a combined optimization design method for the wind turbine’s blade is developed in this paper. The influence of waves on the power of the floating wind turbine is studied in this paper. The results show that, with the increase of wave height, the power fluctuation of the wind turbine increases and the average power of the wind turbine decreases. With the increase of wave period, the power oscillation amplitude of the wind turbine increases, and the power of the wind turbine at equilibrium position decreases. The optimal design of the offshore floating wind turbine blade under different wind speeds is carried out. The results show that the optimum effect of the blades is more obvious at low and mid-low wind speeds than at rated wind speeds.... [more]

Traditional static anaerobic digestion technology presents the disadvantages of a low gas production rate and long digestion cycle, which is not conducive to the treatment of livestock manure. A 12 m3 multiphase flow anaerobic digester (MFD) was developed in this study to improve the biogas production rate and maintain constant temperature digestion during winters. Full-scale field experiments were conducted on the biogas production rate at different temperatures, the dynamic digestion effects, and the dynamic heating digestion effects of the system at Sichuan, China. A comparison of the dynamic and static digestion results of 50 days indicated that the biogas production for the dynamic digestion (DD) group was 115.22 m3 or 127.1% higher than that of the static digestion (SD) group with the same digestion temperature. The results of the heat transfer performance experiment revealed that the heat transfer rate of the system increased significantly, and the temperature of the biogas slur... [more]

Determining the ideal size of maintenance staff is a daunting task, especially in the operation of large and complex mechanical systems such as thermal power plants. On the one hand, a significant investment in maintenance is necessary to maintain the availability of the system. On the other hand, it can significantly affect the profit of the plant. Several mathematical modeling techniques have been used in many different ways to predict and improve the availability and reliability of such systems. This work uses a modeling tool called generalized stochastic Petri net (GSPN) in a new way, aiming to determine the effect that the number of maintenance teams has on the availability and performance of a coal-fired power plant cooling tower. The results obtained through the model are confronted with a thermodynamic analysis of the cooling tower that shows the influence of this system’s performance on the efficiency of the power plant. Thus, it is possible to determine the optimal size of th... [more]

Recovering energy from waste energy sources is an important issue as environmental pollution and the energy crisis become serious. In the same context, recovering liquefied natural gas (LNG) cold energy from an LNG-powered ship is also important in terms of energy savings. To this end, this study investigated a novel solution for a LNG-powered ship to recover LNG cold energy. Six different organic Rankine cycle (ORC) systems (three for high-pressure dual-fuel engines and three for medium-pressure dual-fuel engines) were proposed and optimized; nine different working fluids were investigated; annualized costs for installing proposed ORC systems were estimated based on the optimization results. In addition, a sensitivity analysis was performed to identify the effect of uncertainties on the performance of the ORC systems. As a result, the ORC system for the medium-pressure engines with direct expansion, multi-condensation levels, and a high evaporation temperature exhibited the best perfo... [more]

Accurate forecasting of electric loads has a great impact on actual power generation, power distribution, and tariff pricing. Therefore, in recent years, scholars all over the world have been proposing more forecasting models aimed at improving forecasting performance; however, many of them are conventional forecasting models which do not take the limitations of individual predicting models or data preprocessing into account, leading to poor forecasting accuracy. In this study, to overcome these drawbacks, a novel model combining a data preprocessing technique, forecasting algorithms and an advanced optimization algorithm is developed. Thirty-minute electrical load data from power stations in New South Wales and Queensland, Australia, are used as the testing data to estimate our proposed model’s effectiveness. From experimental results, our proposed combined model shows absolute superiority in both forecasting accuracy and forecasting stability compared with other conventional forecast... [more]

The development of electric vehicles has significant value for the sustainable utilization of energy resources. However, the unreasonable construction of charging stations causes problems such as low user satisfaction, waste of land resources, unstable power systems, and so on. Reasonable planning of the location and capacity of charging stations is of great significance to users, investors and power grids. This paper synthetically considers three indicators of user satisfaction: charging convenience, charging cost and charging time. Considering the load and charging requirements, the model of electric vehicle charging station location and volume is established, and the model based on artificial immune algorithm is used to optimize the solution. An empirical analysis was conducted based on a typical regional survey. The research results show that increasing the density of charging stations, lowering the charging price and shortening the charging time can effectively improve user satisf... [more]

The growing penetration of photovoltaic (PV) systems may cause an over-voltage problem in power distribution systems. Meanwhile, charging of massive electric vehicles may cause an under-voltage problem. The over- and under-voltage problems make the voltage regulation become more challenging in future power distribution systems. Due to the development of smart grid and demand response, flexible resources such as PV inverters and controllable loads can be utilized for voltage regulation in distribution systems. However, the voltage regulation needs to calculate the nonlinear power flow; as a result, utilizing flexible resources for voltage regulation is a nonlinear scheduling problem requiring heavy computational resources. This study proposes an intelligent search algorithm called voltage ranking search algorithm (VRSA) to solve the optimization of flexible resource scheduling for voltage regulation. The VRSA is built based on the features of radial power distribution systems. A numeric... [more]

The aim of this article is to highlight the impact of a periodic power source, such as a tidal turbine, on the operation and sizing of an autonomous hybrid microgrid with photovoltaic panels and storage. The technique of hill climbing (repeated local search) is used to find the optimum combination of Renewable Energy Sources (RES) and storage units with respect to the required capital cost for various load curves and weather conditions. To model the operation of the microgrid devices, analytical and phenomenological models, have been used, which take into account the specifications of actual commercial devices. Six different case studies are presented, with and without a tidal generator, which are based on six different sets of electrical consumption data corresponding to the Euripus campus of the National & Kapodistrian University of Athens (NKUA) in Psachna, Evia, Greece, and respective meteorological and tidal current data from the region. The results show that tidal energy may be u... [more]