For renewable ocean wave energy to support global energy demands, wave energy converters (WECs) will likely be deployed in large numbers (farms), which will necessarily change the nearshore environment. Wave farm induced changes can be both helpful (e.g., beneficial habitat and coastal protection) and potentially harmful (e.g., degraded habitat, recreational, and commercial use) to existing users of the coastal environment. It is essential to estimate this impact through modeling prior to the development of a farm, and to that end, many researchers have used spectral wave models, such as Simulating WAves Nearshore (SWAN), to assess wave farm impacts. However, the validity of the approaches used within SWAN have not been thoroughly verified or validated. Herein, a version of SWAN, called Sandia National Laboratories (SNL)-SWAN, which has a specialized WEC implementation, is verified by comparing its wave field outputs to those of linear wave interaction theory (LWIT), where LWIT is theo... [more]

The recent expansion of the internet network and rapid advancements in information and communication technology are expected to lead to a significant increase in power consumption and the number of data centers. However, these data centers consume a considerable amount of electric power all year round, regardless of working days or holidays; thus, energy saving at these facilities has become essential. A disproportionate level of power consumption is concentrated in computer rooms because air conditioners in these rooms are required to operate throughout the year to maintain a constant indoor environment for stable operation of computer equipment with high-heat release densities. Considerable energy-saving potential is expected in such computer rooms, which consume high levels of energy, if an outdoor air-cooling system and air conditioners are installed. These systems can reduce the indoor space temperature by introducing a relatively low outdoor air temperature. Therefore, we studied... [more]

Landfilling of organic waste is still the predominant waste management method in Canada. Data collection and analysis of the waste were done for the case study city of Montréal in Canada. A life cycle assessment was carried out for the current and proposed waste management system using the IWM-2 software. Using life cycle assessment results, a non-dominated sorting genetic algorithm was used to optimize the waste flows. The optimization showed that the current recovery ratio of organic waste of 23% in 2017 could be increased to 100% recovery of food waste. Also, recycling could be doubled, and landfilling halved. The objective functions were minimizing the total energy consumption and CO2eq emissions as well as the total cost in the waste management system. By using a three-objective optimization algorithm, the optimized waste flow for Montréal results in 2% of waste (14.7 kt) to anaerobic digestion (AD), 7% (66.3 kt) to compost, 32% (295 kt) to recycling, 1% (8.5 kt) to incineration,... [more]

The high concentration of pollutant sources, complex topography, and regional meteorology are all factors that may contribute to air episodes in dense urban areas. Energy use in buildings is a significant source of pollution in the Greater Athens Area (GAA), Greece, where over 90% of the existing building stock has been classified below energy class B. The present study focuses on the potential effects that a realistic level of building energy efficiency upgrades will have on the air quality over the GAA. Results are expected to be relevant to similar urban areas. Furthermore, the study of primary pollutants’ dispersion is applied at a 1.2 × 1.2 km spatial resolution, providing significant local (neighborhood) level information. Numerical simulations were performed using EPA’s CALPUFF modeling system with wind field input from an independent numerical weather prediction using NCAR’s Weather Research and Forecasting (WRF) model. In order to calculate emission rates from major roads, hig... [more]

Our paper focuses on eliciting the factors that constitute threats and dangers for urban energy networks, information networks, and energy grids in the cities. Moreover, we attempt to determine how these threats are perceived by the inhabitants of those cities. Urban energy networks tend to play an increasing role in achieving energy efficiency and environmental sustainability in large urban centers. Even though they do not necessarily correspond to reality, public opinions can substantially influence the adoption of relevant technologies in populous urban locations. We use the public opinion representative survey data from the Czech Republic (a sample of 1023 respondents) in order to show how people perceive the dangers and threats for urban energy networks from such events as: (i) Extensive and long-term power outage; (ii) service disruption of the Internet, mobile networks or telephone landlines; (iii) cyber-attacks, and (iv) the technological dependence of the state on multinationa... [more]

 Borehole heat exchangers (BHEs) generally employ water-antifreeze solutions to allow working fluid temperatures to fall below 0 °C. However, some local regulations have forbidden antifreeze additives (even non-toxic ones) to avoid groundwater pollution in case of pipe leakage. This paper presents a techno-economic and environmental analysis of four different fluids: propylene glycol at 25% and 33% weight concentrations, calcium chloride at 20% weight concentration (CaCl2 20%), and pure water. Thermal loads from 36 case studies in six different climate zones are used to perform BHE sizing and compare the abovementioned fluids from the economic, operational, and environmental points of view. The economic analysis and the carbon footprint assessment are performed on a life cycle of 25 years considering the installation (BHE drilling, fluid) and operation (heat pump and ground-side circulation pump energy demand, fluid replacement) of the simulated GSHPs. Results highlight that using... [more]

Increasing the share of renewable energies in electricity and heat generation is the cornerstone of a climate-friendly energy transition. However, as renewable technologies rely on diverse natural resources, the design of decarbonized energy systems inevitably leads to environmental trade-offs. This paper presents the case study of a comprehensive impact assessment for different future development scenarios of a decentralized renewable energy system in Germany. It applies an adapted ecological scarcity method (ESM) that improves decision-support by ranking the investigated scenarios and revealing their main environmental shortcomings: increased mineral resource use and pollutant emissions due to required technical infrastructure and a substantial increase in land use due to biomass combustion. Concerning the case study, the paper suggests extending the set of considered options, e.g., towards including imported wind energy. More generally, the findings underline the need for a comprehe... [more]

The present study sought to investigate the formation of carbon monoxide (CO) during aerobic biostabilization (AB) of the organic fraction of municipal solid waste (OFMSW) in forced aerated piles. Understanding the factors influencing CO formation may be important not only for safety, but also for environmental and technical reasons. The objective of the study was to determine the effect of the technical parameters of the piles on the concentration of CO in the process gas during AB of the OFMSW in a full-scale waste treatment system: rate of waste aeration (from 3365 to 12,744 m3∙Mg−1), waste mass loads in the pile (from 391 to 702 Mg), thermal conditions, application of sidewalls as an element of pile bioreactor construction, concentration of O2 and CO2 in the waste piles and the duration of the process from 6 to 9 weeks. The temperature and concentration of O2, CO2, CO, CH4 were measured in each pile at weekly intervals. All six reactors provide stable thermal and aerobic conditions... [more]

Predicting the energy needs of future water systems is important for coordinating long-term energy and water management plans, as both systems are interrelated. We use the case study of the Los Angeles City’s Department of Water and Power (LADWP), located in a densely populated, environmentally progressive, and water-poor region, to highlight the trade-offs and tensions that can occur in balancing priorities related to reliable water supply, energy demand for water and greenhouse gas emissions. The city is on its path to achieving higher fractions of local water supplies through the expansion of conservation, water recycling and stormwater capture to replace supply from imported water. We analyze scenarios to simulate a set of future local water supply adoption pathways under average and dry weather conditions, across business as usual and decarbonized grid scenarios. Our results demonstrate that an aggressive local water supply expansion could impact the geospatial distribution of ele... [more]

The overall purpose of this study is to evaluate the impact of financing renewable energy sources on the assessment of sustainable development in Poland’s provinces. There are also two detailed objectives: (1) define how Polish policies are being passed on to local authorities; (2) realize a Poland’s provinces ranking, taking into account the indicators of sustainable development, thanks to the taxonomic measure of development in the area of environmental order. This study deals with the taxonomic assessment of local sustainable development in the local administration units of Poland. To this end, the methods of linear ordering were applied for the assessment of the level of objects differentiation with the use of a closed set of statistical features. The presented analysis proved that the taxonomic distances between synthetic measures for particular provinces are considerable. The highest values of the integrated measure in 2018 were obtained by the following provinces: Podlaskie, Sub... [more]

Under the background of the prompt development of the global economy and continuous improvement of environmental protection awareness, end-of-life vehicles (ELVs), as an essential part of “urban mineral”, have the substantial economic, resource, and environmental value. The research on reverse logistics of ELVs has developed rapidly, but the existing relevant reviews are based on unique research perspectives and do not fully understand the whole field. This work aims to help comprehend the research status of reverse logistics of ELVs, excavate and understand the critical publications, and reveal the main research topics in the past 20 years. Based on 299 articles published in ISI Web of Science Core Collection (WOSCC) database from 2000 to 2019, this paper uses the methodologies of literature bibliometrics and content analysis, combined with VOS viewer, CiteSpace, and Bibexcel software. Besides, the literature quantity and cited situation, core journals, distribution of countries and r... [more]

In this paper, we consider the navigation of a group of solar-powered unmanned aerial vehicles (UAVs) for periodical monitoring of a set of mobile ground targets in urban environments. We consider the scenario where the number of targets is larger than that of the UAVs, and the targets spread in the environment, so that the UAVs need to carry out a periodical surveillance. The existence of tall buildings in urban environments brings new challenges to the periodical surveillance mission. They may not only block the Line-of-Sight (LoS) between a UAV and a target, but also create some shadow region, so that the surveillance may become invalid, and the UAV may not be able to harvest energy from the sun. The periodical surveillance problem is formulated as an optimization problem to minimize the target revisit time while accounting for the impact of the urban environment. A nearest neighbour based navigation method is proposed to guide the movements of the UAVs. Moreover, we adopt a partiti... [more]

With the continuous improvement of the voltage level of the power system, the electromagnetic interference problem of the converter station has become more and more serious. The thyristor control unit (TCU) is the core equipment of the converter valve, and its normal operation is related to the safe and stable operation of the entire converter valve. This paper starts with the actual electromagnetic environment in the converter valve hall, analyzes the failure principle of the TCU under electromagnetic disturbance, and observes the electromagnetic field distribution and sensitive components on the circuit board. Then, a TCU failure early warning method based on pattern matching and support vector regression (SVR) is proposed. The failure trend is deduced by constructing an abnormal information vector, and then the failure predictor is constructed using support vector regression optimized by grid search (GS), genetic algorithm (GA), and particle swarm optimization (PSO). Considering the... [more]

This paper summarizes the literature on detection of islanding resulting from distributed generating capabilities in a power distribution system, with emphasis on the rural distribution systems. It is important to understand the legacy technology and equipment in the rural distribution electrical environment due to the growth of power electronics and the potential for adding the new generations of intelligent sensors. The survey identified four areas needing further research: 1. Robustness in the presence of distribution grid disturbances; 2. the future role of artificial intelligence in the islanding application; 3. more realistic standard tests for the emerging electrical environment; 4. smarter sensors. In addition, this paper presents a synchro-phasor-based islanding detection approach based on a wireless sensor network developed by the University of Texas at Austin. Initial test results in a control hardware-in-the-loop (CHIL) simulation environment suggest the effectiveness of th... [more]

The 20-year cumulative fatigue damage of an offshore jacket substructure was estimated under the long-term local environmental conditions in the Taiwan Strait. Because of the nonlinearity of wave load for slender members of the structure, time-domain simulations of the dynamic finite element model were conducted for each sea state. By utilizing the Dirlik method to process the stress signals, the fatigue damages of joints were computed. Concerning the computational time, we propose a probability-based method of using a representative combination of environmental conditions in this study, which can considerably reduce the required number of evaluations prior to determining fatigue damage, thereby improving the process of preliminary design. The results show that only three sea states among 120 can represent 28% of the average damage ratio, and up to 17 sea states fully resolved the fatigue life.

Renewable energy sources are environmentally friendly and cost-efficient. However, the problem with these renewable resources is their heavy reliance on weather conditions. Thus, at times, these solutions are not guaranteed to meet the required demand all the time. For this, hybrid microgrids are introduced, which have a combination of both renewable energy sources and non-renewable energy resources. In this paper, a cost-efficient optimization algorithm is proposed that minimizes the use of non-renewable energy sources. It maximizes the use of renewable energy resources by meeting the demand for utility grids. Real data based on the load and demand of the utility grids in Italy is used, and a system that determines the optimal sizing of the microgrid and a daily plan is introduced to optimize the renewable resources operations. As part of the proposal, the objective function for the operation and planning of the microgrid in such a way to minimize cost is formulated. Moreover, a varia... [more]

The article examines the relationship between CO2 equivalent emissions and agricultural production, taking into account additional economic and social variables that correct the considered relationship for the six Central and Eastern European countries over the period 1992−2017. The aim of the article was to confirm or negate the occurrence of the environmental Kuznets curve (EKC) in the countries of Central and Eastern Europe. Countries that experienced a political transformation and were subsequently admitted to the European Union (EU) undergoing a preparatory period were included. The topic is timely as all EU countries are required to monitor their emissions under the EU Climate Monitoring Mechanism. The discussed problem is significant due to the changes taking place in the common agricultural policy, the choice of actions to be taken by individual countries in their national policies, and the choice of instruments to support the transformation of agriculture. Agriculture has a pa... [more]

The purpose of the “Made in China 2025” strategy is to enhance the innovation capabilities of the local manufacturing industry and achieve green and sustainable development. The role of innovation in the development of manufacturing is a hotspot in academic research, though only a few studies have analyzed the interaction between green technology manufacturing efficiency and its external innovation capabilities. This study used the 2011−2017 Chinese A-share listed manufacturing companies as samples to discuss whether regional innovation capabilities can promote the improvement of green technology manufacturing efficiency. The results showed that a significant spatial correlation between regional innovation capability and green technology manufacturing efficiency was prevalent within spatial heterogeneous bounds. In addition, regional innovation capability directly promoted the effective manufacturing of green technology efficiency, which was strongest in the eastern region of the count... [more]

“Israeli Hope in Academia” is a program, designed by the president of the state of Israel, Reuven Rivlin. The program is based on the perception that Israeli society is changing, from having a clear majority and several minorities to a society comprised of four principal sectors that are roughly similar in size: secular Jews, religious Jews, Haredi (ultra-orthodox) Jews and Arabs. The program acts to encourage a more diverse and culturally competent higher education system that promotes partnership. One of the means to achieve that goal is to create meaningful educational interactions between people from academia and the younger generation of these sectors. Over the past year, students from various faculties in the Holon Institute of Technology (HIT) took part in a course called “Green Ambassadors”, which corresponds with the “Israeli Hope” program. This course was considered an action learning course, which is a course that combines academic learning and social involvement that has an... [more]

This study analyzes the road freight sector of São Paulo state to identify the best options to reduce greenhouse gases emissions and local pollutants, such as particulate matter, nitrogen oxides, carbon monoxide, and hydrocarbons. Additionally, the investment cost of each vehicle is also analyzed. Results show that electric options, including hybrid, battery, and hydrogen fuel-cell electric vehicles represent the best options to reduce pollutants and greenhouse gases emissions concomitantly, but considerable barriers for their deployment are still in place. With little long-term planning on the state level, electrification of the transport system, in combination with increased renewable electricity generation, would require considerable financial support to achieve the desired emissions reductions without increasing energy insecurity.

The performance of three different confluent jets ventilation (CJV) supply devices was evaluated in a classroom environment concerning thermal comfort, indoor air quality (IAQ) and energy efficiency. The CJV supply devices have the acronyms: high-momentum confluent jets (HMCJ), low-momentum confluent jets (LMCJ) and low-momentum confluent jets modified by varying airflow direction (LMCJ-M). A mixing ventilation (MV) slot jet (SJ) supply device was used as a benchmark. Comparisons were made with identical set-up conditions in five cases with different supply temperatures (TS) (16−18 °C), airflow rates (2.2−6.3 ACH) and heat loads (17−47 W/m2). Performances were evaluated based on DR (draft rating), PMV (predicted mean vote), ACE (air change effectiveness) and heat removal effectiveness (HRE). The results show that CJV had higher HRE and IAQ than MV and LMCJ/LMCJ-M had higher ACE than HMCJ. The main effects of lower Ts were higher velocities, DR (HMCJ particularly) and HRE in the occupie... [more]

The impact of N2 and CO2 atmospheres on the interaction between Eucalyptus pilularis biomass and a ternary molten carbonate eutectic (Li2CO3: Na2CO3: K2CO3) has been investigated at 600 °C and 900 °C. For lower temperature conversion under CO2, prevention of volatile release in the eutectic treated biomass is slightly higher than under N2 injection; however, similar bubble-shaped morphology of the remnant char is observed under both carrier gases. By increasing the temperature to 900 °C under CO2, the reverse Boudouard reaction begins to consume carbon fuel, while molten carbonate gasification also accelerates the reaction to a lower temperature set point (shifted from ~735 °C to ~640 °C). The mass loss of carbonate under CO2 and N2 at 900 °C is 0 (negligible) and 18 wt.%, respectively. In the absence of carbon particles, the decomposition of carbonate to M2O (l) and CO2 (g), as well as molten salt vaporization, are the sole potential routes of weight loss in an inert gas. Previous obs... [more]

Taking climate and geopolitical issues into account, we must shift our thinking towards “eco” and focus on renewable energy. The accessible solar energy represents 400 times the amount of consumption, while its potential represents 10,000 times the amount of demand. The paper aims to analyze recycled, customized polyvinyl butyral (PVB) with high purity (more than 98%) concerning its physicochemical and mechanical properties and its possible applicability in the photovoltaic industry as an encapsulating material. The detailed investigation on polyvinyl butyral starting from characterizations, homogenization, and moulding process to tensile tests and used exposure testing in laboratory apparatus are performed. Samples of recycled polyvinyl butyral were exposed to ultraviolet (UV) radiation of the value 0.76 W.m−2.nm−1 at 340 nm, water spray, drying at 50 °C and condensation for 320 h when the radiation was turned off. The results obtained were more controlled in a laboratory environment... [more]

Compared with limestone-based wet flue gas desulfurization (WFGD), magnesia-based WFGD has many advantages, but it is not popular in China, due to the lack of good wastewater treatment schemes. This paper proposes the wastewater treatment scheme of selling magnesium sulfate concentrate, and makes thermal and economic analysis for different concentration systems in the scheme. Comparisons of different concentration systems for 300 MW power plant were made to determine which system is the best. The results show that the parallel-feed benchmark system is better than the forward-feed benchmark system, and the parallel-feed optimization system with the 7-process is better than other parallel-feed optimization systems. Analyses of the parallel-feed optimization system with 7-process were made in 300, 600, and 1000 MW power plants. The results show that the annual profit of concentration system for a 300, 600, and 1000 MW power plant is about 2.58 million, 5.35 million, and 7.89 million Chine... [more]

Automatic peer-to-peer energy trading can be defined as a Markov decision process and designed using deep reinforcement learning. We consider prosumer as an entity that consumes and produces electric energy with an energy storage system, and define the prosumer’s objective as maximizing the profit through participation in peer-to-peer energy trading, similar to that of the agents in stock trading. In this paper, we propose an automatic peer-to-peer energy trading model by adopting a deep Q-network-based automatic trading algorithm originally designed for stock trading. Unlike in stock trading, the assets held by a prosumer may change owing to factors such as the consumption and generation of energy by the prosumer in addition to the changes from trading activities. Therefore, we propose a new trading evaluation criterion that considers these factors by defining profit as the sum of the gains from four components: electricity bill, trading, electric energy stored in the energy storage s... [more]