The meteorological environment is a determining factor in photovoltaic (PV) system feasibility (PVSF). To evaluate this impact more accurately, a quantitative analysis model based on multimeteorological factors and the Random Forest Regression model is proposed in this work. Firstly, an evaluation system is established to assess the impact. Then, to predict the indicators of the evaluation system, a parameter, i.e., performance ratio in sampling period, is defined. Secondly, a set of essential influences on the performance ratio in the sampling period is established through analyzing and reducing the discovered influences on the PV system performance. Finally, data from the Desert Knowledge Australia Solar Centre (DKASC) website are used to conduct the experiment. During the experiment, the sample set is cleaned using the model based on the cosine of the zenith angle. The functional relationship between the performance ratio in the sampling period and its essential influences is establ... [more]

Set against the United Nations Sustainable Development Goal 7, and the need to increase biomass Improved Cookstove (ICS) adoption and sustained use across the globe, this paper presents an evaluation of Practical Action Nepal’s (PAN) Results Based Financing for Improved Cookstove Market Development in Nepal (RBF) project, which was conducted between January and April 2020. Nepal has a long history of International Development assistance, yet 65.8% of rural households still use firewood as their primary source of energy. With this in mind we aimed to understand the barriers, enablers and engagement strategies for the adoption and sustained use of Improved Cookstoves (ICS), map key stakeholder role perceptions and interactions, and identify areas for improvement to increase the sustained use of ICS in the focus communities. This paper uses the methodological approach from the qualitative Technology Implementation Model for Energy (TIME) for the data collection and analysis elements. Our... [more]

This article presents the development, simulation and validation of the uncertainty cost functions for a commercial building with climate-dependent controllable loads, located in Florida, USA. For its development, statistical data on the energy consumption of the building in 2016 were used, along with the deployment of kernel density estimator to characterize its probabilistic behavior. For validation of the uncertainty cost functions, the Monte-Carlo simulation method was used to make comparisons between the analytical results and the results obtained by the method. The cost functions found differential errors of less than 1%, compared to the Monte-Carlo simulation method. With this, there is an analytical approach to the uncertainty costs of the building that can be used in the development of optimal energy dispatches, as well as a complementary method for the probabilistic characterization of the stochastic behavior of agents in the electricity sector.

The ecological and economic context determine the management goals of a modern enterprise, which are in line with the growing concern about the well-being of society caused by the effects of enterprises’ activities that are particularly harmful to the environment. This increases the need to search for new tools that will have the capacity to generate information supporting the decision-making process in the area of enterprise management in terms of ecological, economic, and social goals. For these reasons, synthetic measures of development were constructed on the basis of the set of diagnostic variables describing various aspects of sustainable development in the case. Based on the environmental synthetic indicators, it has been possible to point out the Polish voivodeships, in which enterprises that are particularly harmful to the environment were able to reduce the emissions of dust and gaseous pollutants in the 2005−2019 period. These changes were often accompanied by an increase in... [more]

The European Union’s environmental goal by 2050 is to become the first climate-neutral continent in the world. This means specific efforts for diversifying the energy mix and investing in low-carbon energy. Our study investigates the nexus among carbon emissions, energy consumption and mix, and economic growth in a modified framework that includes the contribution of inward foreign direct investments and international trade to lowering air pollution. We have used a two-step approach to explore in more detail the links between these variables in 24 EU countries over the period 1995−2018, followed by a panel VECM analysis. Our results indicate that there is a unidirectional link between economic growth and CO2 emissions, which should imply a decoupling of environmental improvement measures from the pace of economic growth. We also find bidirectional causal relationships between low-carbon energy shares in consumption and CO2 emissions, as well as between low-carbon energy share in consum... [more]

The necessity of developing renewable energy sources has contributed to increasing interest in developing the anaerobic digestion for producing biomethane since it both provides green energy and reduces disposal treatment. In this regard, to assure efficient water utilization by finding alternative water sources, sewage sludge collected from the wastewater treatment plant (WWTP) was recently investigated because it could represent a suitable resource for producing biomethane within the context of a circular economy. Therefore, this study aims at improving the current knowledge on the feasibility of biomethane production from sewage sludge by optimizing the logistic-supplying phase. In this regard, a GIS-based model was developed and applied to the Emilia-Romagna region to consider the existing networks of WWTPs and biogas systems to valorize sewage sludge for bioenergy production and minimizing environmental impact. The results of the GIS analyses allowed to localize the highest produc... [more]

Indoor climate comfort is important for school buildings. Nowadays, this is a topical problem, especially in renovated buildings. Poorly ventilated school classrooms create improper conditions for classrooms. A post-occupancy study was performed in a school building in temperate climatic conditions. The evaluation was based on the results of long-term monitoring of the natural ventilation strategy and measurements of the carbon dioxide concentration in the school classroom’s indoor environment. The monitoring was carried out in an old school building that was constructed in the 1970s and compared to testing carried out in the same school classroom after the building was renovated in 2016. Surprisingly, the renovated classroom had a significantly higher concentration of CO2. It was found that this was due to the regulation of the heating system and the new airtight windows. The occupants of the renovated classroom have a maintained thermal comfort, but natural ventilation is rather negl... [more]

The main objective of this article is to analyze the use of modern information technologies, referring to the example of smartphones, paying particular attention to selected cultural aspects of the phenomena that appear to play an important role in creating the concept of a smart city. The authors asked a research question: whether there is a difference in the perception of smart cities between Poland and Turkey in terms of a set of individual criteria and cultural differences in the context of globalization processes. The authors decided to compare the use of smartphones in an international environment. In their analysis, they examined Poland and Turkey, the countries which are characterized by markedly distinct culture and customs, but simultaneously present a similar level of IT development. The research was conducted in two stages at the turn of 2019 and 2020, and it involved more than 600 selected young people aged 18−25. It is important to mention that the study consulted the gro... [more]

Indoor Environmental Quality (IEQ) is a crucial issue in school buildings, because of the conditions that pupils and students are exposed to. From this assumption, potentialities of retrofit actions with Nearly Zero-Energy Building (NZEB) targets were analyzed in existing school buildings, focusing on the impact of such measures of IEQ. Numerical analyses in a transient regime for a typical school building were carried out to assess the impacts on the thermal comfort and Indoor Air Quality (IAQ). The study took into account several building configurations and three reference cities. The results showed severe overheating risks in retrofitted schools: the operative temperature increased by several degrees with respect to the existing configuration, leading to thermal discomfort for a relevant part of the observation period. Passive techniques, namely external solar protection devices and night ventilative cooling, were applied to assess their mitigation potential. Results showed that the... [more]

The paper deals with the characteristics of three different types of power train hybridization of forest logging machines and with the benefits of reducing environmental impacts by comparing new technology with more conventional, older technology. New hybridization options that could be implemented in forestry machines are also discussed. The paper divides a hybrid solution into three classes based on the energy used in the system of hybridization. First is an electro-hybrid system that uses an electric motor and battery or different storage device. The second, a hydraulic hybrid system, is a solution with a hydraulic accumulator, hydraulic motor, and pump. The third system is a combination of the electro-hybrid and hydraulic-hybrid system. The current technical and technological development of hybrid drive systems, as well as their components, has led to significant improvements in drive performance and thus better performance of the new generation of forest vehicles. Improved energy... [more]

It is necessary to carry out experiments on cores with different degrees of crack development when studying the seepage law of cracked reservoirs and evaluating cracks. The seepage experiment in the laboratory requires cores with different degrees of microcrack development; cores obtained via conventional drilling cannot meet the requirements, and the efficacies and evaluation methods of geological parameters used for artificial cracks are not perfect. In this study, cores are loaded using a triaxial gripper, and cracks are produced by changing the difference of stress; the relationship between the increased rate of permeability and the change in stress concentration is used to evaluate the degree of development of the crack in real time. The angle between the cracks and the maximum principal stress direction, calculated using the Mohr−Coulomb failure criterion, is 20−27.5°, which provides theoretical support for the process of crack creation. The experimental results show that the per... [more]

Space cooling is currently the fastest-growing end-user in buildings. The global warming trend combined with increased population and economic development will lead to accelerated growth in space cooling in the future, especially in China. The hot summer and cold winter (HSCW) zone is the most densely populated and economically developed region in China, but with the worst indoor thermal environment. Relatively few studies have been conducted on the actual measurements in the optimization of insulation design under typical intermittent cooling modes in this region. This case study was conducted in Chengdu—the two residences selected were identical in design, but the south bedroom of the case study residence had interior insulation (inside insulation on all opaque interior surfaces of a space) retrofitted in the bedroom area in 2017. In August 2019, a comparative on-site measurement was done to investigate the effect of the retrofit work under three typical intermittent cooling patterns... [more]

The work at hand assesses several driving factors of carbon emissions in terms of urbanization and energy-related parameters on a panel of emerging European economies, between 1990 and 2015. The use of machine learning algorithms and panel data analysis offered the possibility to determine the importance of the input variables by applying three algorithms (Random forest, XGBoost, and AdaBoost) and then by modeling the urbanization and the impact of energy intensity on the carbon emissions. The empirical results confirm the relationship between urbanization and energy intensity on CO2 emissions. The findings emphasize that separate components of energy consumption affect carbon emissions and, therefore, a transition toward renewable sources for energy needs is desirable. The models from the current study confirm previous studies’ observations made for other countries and regions. Urbanization, as a process, has an influence on the carbon emissions more than the actual urban regions do,... [more]

Improving quality of life still remains the main goal of strategic documents and is promoted by leaders on the global, national, regional, and local levels. Moreover, this ambitious challenge should be consistent with the principles of sustainable development, including the social, economic, and environmental aspects. The ISO 37120 indicators within the World Council on City Data (WCCD) database may be used to monitor the urban performance over time. However, the interpretation of the results is not always easy and sometimes requires a complex analysis. The aim of this paper was to investigate the possibility of illustrating in a transparent way the urban quality of life using the utility method. This study also presents that this method may facilitate making data-driven decisions on urban management, planning and investment. Thus, it may be useful for decision makers and help cities and communities of all sizes to become more sustainable, safe and resilient, prosperous, inclusive, and... [more]

Climate change as a worldwide phenomenon is the cause of multinational agreements such as the Kyoto Protocol and the Paris Agreement with the goal of reducing greenhouse gas emissions. Biogas is one of the most promising biofuels for the integration of clean energy sources; however, biogas has the disadvantage of a low calorific value. To overcome this problem, mechanical devices such as swirlers are implemented in combustion chambers (CCs) to increase their combustion efficiencies. A swirler induces rotation in the airstream that keeps a constant re-ignition of the air−fuel mixture in the combustion. We present the numerical modeling using computational fluid dynamics (CFD) and experimental testing of combustion with biogas in a CC, including an optimized swirler in the airstream with a swirl number (Sn) of 2.48. A turbulence model of the renormalization group (RNG) was used to analyze the turbulence. Chemistry was parameterized using the laminar flamelet model. The numerical model al... [more]

In recent years, many studies have been published on the applications of exergy analyses to complex systems, including entire countries. Oddly, the results, although consistent, appear to lead to divergent conclusions. The underlying problem is that in a “pure” thermodynamic analysis, the so-called “externalities”, i.e., labor, capital, and environmental costs, are often neglected or only approximately included in the picture. In 1998, an extension of the theory that included the exergy content of the externalities was introduced, called “extended exergy accounting” (EEA). Its novelty consisted of the explicit inclusion of the exergy embodied in the externalities. The aim of this work is to use the results of the extended exergy accounting to obtain an indicator that can be used to assess the sustainable development of a country. First, a novel methodological approach to the theory is presented, based on the exploitation of a very large dataset obtained from several national and Europe... [more]

A standardized range system based on carefully selected multi-criteria is proposed in this work to assess the feasibility of hydropower implementation. A thought process has been developed as a simple-to-use and easy-to-understand methodology. Today, due to the broad concern for the natural environment, the use of renewable energy sources has become globally popular. Subsequently, such solutions as the application of renewable energy for electricity generation are often considered the most environmentally friendly installations. Unfortunately, no methodology to assess the possibility of hydropower plant realization in either scientific or industry literature has been put forward, and this constitutes a blatant failure. The proposed range system has been designed to use selected information (head, available flow, fish migration, hydrotechnical infrastructure, protected areas, environmental flow, status of surface water body), which is available through a variety of sources that are easy... [more]

Numerous studies on positioning technology are ongoing for recognizing the positions of objects accurately. Vision-, sensor-, and signal-based technologies are combined for recognizing the positions of objects outdoors and indoors. While positioning technologies involving wireless communication based on sensors and signals are commonly used in outdoor environments, the performance becomes degraded in indoor environments. Therefore, a vision-based indoor positioning method using a QR code is proposed in this study. A user’s position is measured by determining the current position of a smartphone device accurately based on the QR code recognized with a smartphone camera. The direction, distance, and position are acquired using the relationship between the three-dimensional spatial coordinate information of the camera and the center point coordinates of a two-dimensional planar QR code obtained through camera calibration.

A comprehensive investigation of the directional bending performance of a 4-leg jacket substructure, supporting a 3 MW offshore wind turbine, has been carried out in this study. The jacket substructure with a Pratt bracing system which is already installed in the southwest offshore wind farm in South Korea has been chosen as a reference support structure. A numerical model of the 3MW support structure (i.e., tower, transition piece, and jacket structure) is configured, and its structural performances are evaluated under the conditions of (1) extreme environmental loads (Env), (2) critical Design Load Cases (DLCs), and (3) a total of 288 combined load cases (CBs). For the case of Env (i.e., wind, wave, and current loads), loading directions varying from 0° to 360° at intervals of 15° are considered. The DLCs are provided from the 3 MW wind turbine manufacturer, in a 6 × 12 matrix format. The selected 4-leg jacket substructure in this study showed the smallest bending stiffness at the lo... [more]

Electrification plays a crucial role in the advancement of rural communities but establishing its impact to the communities’ sustainable development remains a challenge. This paper presents a pragmatic framework for assessing how electrification affects sustainable development at the grassroots level with eight indicators in the economic, technical, social, and environmental dimensions highlighted. An exploratory factor analysis approach is applied to determine how these dimensions contribute to the community’s overall sustainable development. The framework is applied in two islands in the Philippines of less than 500 households and varying electrification levels. Results indicate that Gilutongan Island, which has less than 24-h electricity access rarely find productive uses of electricity and still make use of conventional fuels for lighting. Meanwhile, Cobrador Island, which has 24-h access see improvements in almost all aspects, although they are slightly burdened by the unaffordabi... [more]

The particulate pollution in the open-pit coal mines of China is particularly severe in winter. The aim of this study is to understand the pollution characteristics of particulate matter (PM) in winter and provide a basis for the prevention and control of particulate pollution. We took the problem of PM concentration at the bottom of the Haerwusu Open-pit Coal Mine (HOCM) as the research object. Dust monitoring equipment at two measurement points at different heights were positioned for continuous monitoring of the PM concentration. The data for three months were gathered. Statistical analyses were performed to analyze the variation characteristics of the PM and its relationship with meteorological factors. The results show that the average PM concentration in the study area is below the average daily limit of the China National Ambient Air Quality Standard (GB 3095-2012). However, the average concentration of PM10 exceeded the national limit in December. The order of PM concentration... [more]

The aim of this research is to analyse the correlation between public intervention in Poland within the Regional Operational Programmes and the key macroeconomic variables for the sustainable development of regions, i.e., the labour market, with particular emphasis on the unemployment rate and the level of employment; the average monthly remuneration; the residential construction market, with particular emphasis on the number of permits issued for the construction of apartments and the number of apartments under construction. The research and the analyses carried out on the basis of the above-mentioned aspects made it possible to indicate the relations between the studied macroeconomic indicators and the EU funds spending in Polish provinces, which will enable the implementation of the sustainable development policy. The capitals used in the research process are very important components of the region’s and country’s sustainable development. In the research, a calculation methodology w... [more]

The process of material removal from a workpiece to obtain the desired shape is termed machining. Present-day material removal technologies have high spindle speeds and thus allow quick material removal. These high-speed spindles are highly exposed to vibrations and, as a result, the accuracy of the final workpiece’s dimensions is compromised. To overcome this problem, the motion of the tool is restricted, and multiple degrees of freedom are given through the motion of the workpiece in different axes. A machining bed configured as a parallel manipulator capable of giving six degrees of freedom (DOF) to the workpiece is proposed in this regard. However, the proposed six DOF machining bed should be energy efficient to avoid an increase in machining cost. The benefit of using the proposed configuration is a reduction in dimensional error and computational time which, as a result, reduces the energy utilization, vibrations, and machining time in practice. This paper presents kinematics, dy... [more]

To meet rising energy demands, power plant operations will expand, influencing the interactions between the water−energy nexus and society. However, a major challenge is integration of social dimensions within electricity generation. To address this, we generate a baseline dataset using US public data (2014−2019) from the Energy Information Administration and US Bureau of Labor Statistics. We identify the rate of energy consumed, CO2, SO2 and NOx emissions generated, and water used per MWh net electricity as well as employee wellbeing per unit MW capacity during electricity generation. Rates of energy consumption (MMBtu/MWh) decreased 4.9%, but water consumption and withdrawal (m3/MWh) both increased 0.93% and 0.31%, respectively. Emissions of CO2, SO2 and NOx decreased 22.64%, 75% and 25% MT/MWh, respectively. Thermoelectric cooling withdrawal and consumption is led by natural gas (50.07%, 38.31%), coal (29.61%, 25.07%), and nuclear energies (13.55%, 18.99%). Electric power generation... [more]

Recently, the interest in the plant factory-based crop production technologies is rising following the application of the smart farm technology to the agricultural arena. A lettuce production system platform is proposed in this study considering the effects of indoor environmental conditions and artificial light sources. The spectral characteristics of a visible ray according to growth performances were analyzed first to develop a control algorithm that can stimulate the plant’s growth for the proposal. Secondly, an imaging system was designed to analyze the plant’s growth characteristics based on the images and set up the system configuration. Lastly, a crop production system was proposed by using an experimental crop production group for environmental control and monitoring.