Heating, ventilation, air conditioning and refrigeration (HVAC&R) systems provide physical environment comfort for the occupants at a possible expense of large amount of energy consumption [...]

Air pollution is a problem shared by the entire world population, and researchers have highlighted its adverse effects on human health in recent years. The object of this paper was the relationship between the pollutants’ concentrations measured in the air and the quantity of pollutant itself inhaled by the human body. The area chosen for the study has a high environmental impact given the significant presence on the territory of polluting activities. The Acerra area (HI) has a waste-to-energy plant and numerous industries to which polluting emissions are attributed. This area has always been the subject of study as the numbers of cancer patients are high. A survey on male patients to evaluate the heavy metals concentrations in the blood was conducted in the two areas and then linked to its values aero-dispersed. Using the air quality data measured by the monitoring networks in two zones, one with high environmental impact (HI) and one with low environmental impact (LI), the chronicle... [more]

Diethyl phthalate (DEP), one of the six typical PAEs priority pollutants declared by the US EPA, has attracted tremendous attention due to its widespread pollution and was selected as the adsorbate in this study. Properties of biochar samples obtained from three different feedstocks, i.e., sawdust (SDBC), rice straw (RSBC), and giant reed (GRBC), pyrolyzed at 400 °C as well as their ability to adsorb DEP from an aqueous solution were investigated. The results showed that the adsorption kinetics were well fitted with the pseudo-second-order model (R2 > 0.99) and the intraparticle diffusion model (R2 > 0.98). The maximal adsorption capacity of the DEP by the prepared biochar was in an order of GRBC (46.04 mg g−1) > RSBC (31.54 mg g−1) > and SDBC (18.39 mg g−1). The higher adsorption capacity of DEP by GRBC is mainly attributed to the higher surface area. The reduction in adsorption capacity of the biochar against DEP with an increase in the solution pH (from 2.5 to 10.0) was possibly due... [more]

Currently, the production of energy from traditional fossil sources is beginning to give way to renewable energy technologies [...]

Heavy metal and pesticide pollution have become an inevitable part of the modern industrialized environment that find their way into all ecosystems. Because of their persistent nature, recalcitrance, high toxicity and biological enrichment, metal and pesticide pollution has threatened the stability of the environment as well as the health of living beings. Due to the environmental persistence of heavy metals and pesticides, they get accumulated in the environs and consequently lead to food chain contamination. Therefore, remediation of heavy metals and pesticide contaminations needs to be addressed as a high priority. Various physico-chemical approaches have been employed for this purpose, but they have significant drawbacks such as high expenses, high labor, alteration in soil properties, disruption of native soil microflora and generation of toxic by-products. Researchers worldwide are focusing on bioremediation strategies to overcome this multifaceted problem, i.e., the removal, imm... [more]

At present, there are significant knowledge gaps in the research on the resource and environmental effects of rare earth exploitation, especially the carbon emission coefficient. This study applies the life cycle assessment approach to calculate the carbon footprint of producing mixed oxide rare earths using ionic rare earth resources and analyze the sources and influencing factors of the carbon footprint. The results show that the carbon footprint of producing 1 kg of mixed oxide rare earths using ionic rare earths is 17.8~24.3 kg CO2 eq, but its uncertainty is 15.54%; the total carbon footprint from 2012 to 2017 reaches 1.6 × 108~2.19 × 108 kg CO2 eq/year, and after 2018, the carbon footprint decreases to 1.51 × 108~2.07 × 108 kg CO2 eq /year. The total carbon footprint of illegal mining is around 1.50 × 108~1.59 × 108 kg CO2 eq/ year. In principle, the higher the recovery rate, the lower the carbon footprint of 1 kg REO production, but with the increase in the recovery rate, the car... [more]

Liquid phase-based microextraction techniques (LPµETs) have attracted great attention from the scientific community since their invention and implementation mainly due to their high efficiency, low solvent and sample amount, enhanced selectivity and precision, and good reproducibility for a wide range of analytes. This review explores the different possibilities and applications of LPμETs including dispersive liquid−liquid microextraction (DLLME) and single-drop microextraction (SDME), highlighting its two main approaches, direct immersion-SDME and headspace-SDME, hollow-fiber liquid-phase microextraction (HF-LPME) in its two- and three-phase device modes using the donor−acceptor interactions, and electro membrane extraction (EME). Currently, these LPμETs are used in very different areas of interest, from the environment to food and beverages, pharmaceutical, clinical, and forensic analysis. Several important potential applications of each technique will be reported, highlighting its a... [more]

The borehole wall stability of depleted reservoirs is a key problem that restricts the deeper potential exploitation of old oilfields. Based on these, according to the seepage and elastic mechanics theory of porous media, combined with laboratory rock mechanics experiments, the dynamic evaluation model of geomechanical parameters of the old reservoir is established, and on this basis, the evaluation method of wellbore stability of new wells in the old reservoir is established, and the changing laws and influencing factors of the wellbore stability of the old reservoir are quantitatively evaluated. The research shows that reservoir pressure, reservoir porosity, effective stress coefficient, strength, in situ magnitude, and direction were all changed due to long-term exploitation; both collapse and fracture pressure decreased, the loss risk of drilling fluid was increased, and safe drilling azimuth was changed. The results can guide reasonable choices such as well position, track and mud... [more]

The intensive production of fossil fuels has led to serious polycyclic aromatic hydrocarbon (PAH) contamination in water and soil environments (as PAHs are typical types of emerging contaminants). Bio-Fenton, an alternative to Fenton oxidation, which generates hydrogen peroxide at a nearly neutral pH condition, could ideally work as a pretreatment to recalcitrant organics, which could be combined with the subsequent biological treatment without any need for pH adjustment. The present study investigated the performance of a Bio-Fenton-assisted biological process for mineralization of three typical types of PAHs. The hydrogen peroxide production, PAH removal, overall organic mineralization, and microbial community structure were comprehensively studied. The results showed that the combined process could achieve efficient chemical oxygen demand (COD) removal (88.1%) of mixed PAHs as compared to activated sludge (33.1%), where individual PAH removal efficiencies of 99.6%, 83.8%, and 91.3%... [more]

Commercialization in the meat-processing industry has emerged as one of the major agrobusiness challenges due to the large volume of wastewater produced during slaughtering and cleaning of slaughtering facilities. Slaughterhouse wastewater (SWW) contains proteins, fats, high organic contents, microbes, and other emerging pollutants (pharmaceutical and veterinary residues). It is important to first characterize the wastewater so that adequate treatment techniques can be employed so that discharge of this wastewater does not negatively impact the environment. Conventional characterization bulk parameters of slaughterhouse wastewater include pH, color, turbidity, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total organic carbon (TOC), total suspended solids (TSS), total nitrogen (TN), total phosphorus (TP), and coliform counts. Characterization studies conducted have revealed the effects of the pollutants on microbial activity of SWW through identification of toxicity of... [more]

There is a “symbiotic relationship” between permafrost and the forest ecosystem; the melted permafrost provides sufficient water for forest growth, and the forest ecosystem plays an important role in protecting the permafrost. Aiming to study the effects of different forest types on soil organic carbon (SOC) and dissolved organic carbon (DOC) in the permafrost region of the Daxing’anling Mountains, this research focuses on the soil of the three forest types of pinus sylvestris var. mongolica forest, larch forest, and birch forest in Beiji Village, Mohe County, Daxing’anling Region, and collected vertical profile soil samples from the three soil layers of 0−10, 10−20, and 20−30 cm at three different sites types (upslope, mesoslope, and downslope) in August 2017. The results show that the forest type is the main influencing factor for the content of SOC and DOC. The site type has a significant effect on the content of SOC and DOC in the three forest types, but the difference varies sligh... [more]

Jet loop reactors are standard multiphase reactors used in chemical, biological and environmental processes. The strong liquid jet provided by a nozzle enforces both internal circulation of liquid and gas as well as entrainment and dispersion of the gas phase. We present a one-dimensional compartment model based on a momentum balance that describes the internal circulation of gas and liquid phase in the jet loop reactor. This model considers the influence of local variations of the gas volume fraction on the internal circulation. These local variations can be caused by coalescence of gas bubbles, additional gas-feeding points and gas consumption or production. In this work, we applied the model to study the influence of a gas-consuming reaction on the internal circulation. In a comprehensive sensitivity analysis, the interaction of different parameters such as rate of reaction, power input through the nozzle, gas holdup, reactor geometry, and circulation rate were investigated. The res... [more]

Global primary energy consumption has increased tenfold over the course of the 20th Century, the availability of non-renewable energy is becoming scarce, and the burning of fossil fuels is leading to global warming. Climate change has now become tangible. The will to act against fossil fuels has become apparent in the western world, and in Germany in particular. This poses a particular challenge for the chemical and pharmaceutical industry, since, in the future, not only will the energy input, but also the feedstock, have to come from non-fossil sources. They must be replaced by carbon capture and utilization, and the exploitation of a circular economy. Concepts for a climate-neutral chemical−pharmaceutical industry have been developed and evaluated. Due to a high predicted consumption of renewable energies and an insufficient expansion of these, Germany will remain an energy importer in the future. The largest consumer in a climate-neutral chemical−pharmaceutical industry will be elec... [more]

Attending both the United Nations Decade of Education for Sustainable Development (2005−2014) and the United Nations 2030 Agenda for Sustainable Development, this review is presented, bearing in mind that green chemistry is essential to contribute to sustainability. This work has compiled all the information relating to green chemistry metrics, so that stakeholders can select an appropriate model, under the Green Chemistry Protocol, to evaluate how much green is a process. The review was organized considering the following convenient sections: the mass valuation, the recognition of the human health and environmental impact, metrics using computational programs (software and spreadsheets), and finally global metrics. This review was developed by consulting the principal databases, since the appearance of the first green chemistry textbook in 1998. A massive number of references were attained involving the keywords proposed below, with six languages observed, highlighted by the English l... [more]

Heavy metals in groundwater and soil are toxic to humans. An accurate risk assessment of heavy metal contamination can aid in environmental security decision making. In this study, the improved ecological risk index (RI) is used to comprehensively investigate the influence of heavy metals in soil and groundwater within electroplating factories and their surrounding regions. In the non-overlapping area, the RI of soil and groundwater is computed individually, and in the overlapping area, the greater RI of soil and groundwater is employed. Two typical electroplating factories are used to examine the heavy metal distribution pattern. The heavy metal concentrations are compared between Factory A, which is in operation, and Factory B, which is no longer in operation, in order to analyze the heavy metal concentrations and associated ecological risks. Heavy metals continue to spread horizontally and vertically after Factory B was closed. Heavy metal concentrations in groundwater surrounding F... [more]

This article focuses on the properties of ecological energy carriers, which are used in agricultural and forestry technology. The aim of the article is to describe the degradation of the working fluid from the point of view of the atomic emission spectrometer, which is used for the purpose of monitoring contaminants and additive elements. The working fluid examined was Shell Naturelle HF-E 46, a universal ecological transmission−hydraulic fluid, which was tested on laboratory test equipment. The laboratory measurement was performed for 200 h, during which the gear hydraulic pump with external gearing was cyclically loaded according to the Vickers standard. The analysis of the transmission−hydraulic fluid was performed after every 50 working hours, where the analysis of the working fluid showed that there were no significant changes in the properties of the working fluid and fluid is suitable for work in agricultural and forestry machines operating in environmentally sensitive environme... [more]

This research aims to utilise heterogeneous sensor fusion using 3D Light Detection and Ranging (LiDAR) and cameras, combined with an object recognition system and a ranging system, to construct an edge computing platform such that a vehicle equipped with the platform can perform computations offline in real time. This work comprises two main sections: the first is heterogeneous fusion, and the second is obstacle recognition and ranging detection. To achieve heterogeneous sensor fusion, 3D−3D point matching was used to find rigid body transformation between two sensors and finally project the LiDAR 3D point cloud image onto the 2D image. For object recognition, YOLOv4-Tiny was used as the detection network. A lightweight network architecture and high computational speed could be effectively used on edge computing hardware with limited performance. Further, by drawing the bounding box, we could detect the point cloud within the bounding box to estimate the distance to the obstacle. For d... [more]

Powder coatings represent an environmentally friendly VOC-free alternative to widely used solvent-borne zinc-rich coatings, with economic and ecological benefits. In particular, powder coatings have several advantageous properties, such as chemical resistance and mechanical strength. However, the performance and characteristics of polyester-based zinc-containing powder coatings remain unknown. In this study, the corrosion performance of polyester powder coatings containing up to 80% zinc is compared. Electrochemical and salt-spray testing results indicate that coatings formulated with 80% zinc demonstrate superior anti-corrosive properties than coatings with lower zinc dosages. Two distinct behavioral phases of the coating with 80% zinc were observed by measurements of open circuit potential (OCP) and polarization resistance (Rp) during immersion tests—a phase indicative of a barrier effect and a phase consistent with galvanic protection. The evolution of the coating was further charac... [more]

The direct activation of diluted CO2 in argon was studied in a co-axial dielectric barrier discharge (DBD) reactor powered by photovoltaic energy. The influence of the initial CO2 and argon concentration on the CO2 decomposition to form CO was investigated using a copper-based catalyst in the discharge zone. It was observed that the CO2 conversion was higher at lower CO2 concentrations. The presence of the diluent gas (argon) was also studied and it was observed how it has a high influence on the decomposition of CO2, improving the conversion at high argon concentrations. At the highest observed energy efficiency (1.7%), the CO2 conversion obtained was 40.2%. It was observed that a way to enhance the sustainability of the process was to use photovoltaic energy. Taking into account a life cycle assessment approach (LCA), it was estimated that within the best-case scenario, it would be feasible to counterbalance 97% of the CO2 emissions related to the process.

This work demonstrates the potential utility of ferrate(VI)-based advanced oxidation processes for the degradation of a representative UV filter, BP-4. The operational parameters of oxidant dose and temperature were determined with kinetic experiments. In addition, the effects of water constituents including anions (Cl−, HCO3−, NO3−, SO42−), cations (Na+, K+, Ca2+, Mg2+, Cu2+, Fe3+), and humic acid (HA) were investigated. Results suggested that the removal rate of BP-4 (5 mg/L) could reach 95% in 60 min, when [Fe(VI)]:[BP-4] = 100:1, T = 25 °C and pH = 7.0, The presence of K+, Cu2+ and Fe3+ could promote the removal of BP-4, but Cl−, SO42−, NO3−, HA and Na+ could significantly inhibit the removal of BP-4. Furthermore, this Fe(VI) oxidation processes has good feasibility in real water samples. These results may provide useful information for the environmental elimination of benzophenone-type UV filters by Fe(VI).

Soil-washing is a potential technology for the disposal of soil contaminated by e-waste; however, the produced soil-washing effluent will contain polybrominated diphenyl ethers (PBDEs) and a large number of surfactants, which are harmful to the environment, so the treatment of PBDEs and the recycling of surfactants are the key to the application of soil-washing technology. In this study, coconut shell granular-activated carbon (GAC) was applied to remove PBDEs from Triton X-100 (TX-100) surfactant which simulates soil-washing effluent. The adsorption results show that, GAC can simultaneously achieve effective removal of 4,4′-dibromodiphenyl ether (BDE-15) and efficient recovery of TX-100. Under optimal conditions, the maximum adsorption capacity of BDE-15 could reach 623.19 μmol/g, and the recovery rate of TX-100 was always higher than 83%. The adsorption process of 4,4′-dibromodiphenyl ether (BDE-15) by GAC could best be described using the pseudo-second-order kinetic model and Freund... [more]

Carbon-reinforced concrete (CRC) has the potential to play a pivotal role in optimizing the built environment and has therefore been experiencing a wave of research and development in the construction industry in recent years. The production of carbon fibers for CRC is energy-intensive, prompting the need to explore circular economy approaches (e.g., recycling at the End-of-Life (EoL)) to optimize the environmental performance of this material. Underdeveloped processes and a resulting lack of primary data regarding the recycling of CRC have hampered a comprehensive sustainability assessment of the novel composite building material. The novelty of this article is the detailed presentation of possible EoL scenarios for CRC and the detailed determination of the respective environmental impacts. This study aims to model EoL options within a Life Cycle Assessment (LCA), focusing on the EoL stage based on ISO 14040/44 using the GaBi ts 10.5.1.124 software and the CML2001 (2016) methodology.... [more]

An analysis of the state of affairs in the theory and practice of implementation of technologically integrated projects in various applied fields was carried out. The peculiarities of the implementation of the technologically integrated projects of the “European Green Deal” for the production of ecologically clean fuel from agricultural waste were analyzed. The expediency of developing a method of coordinating the configurations of technologically integrated “European Green Deal” projects for the production of ecologically clean energy from agricultural waste on the territory of a given region, taking into account their specific project environments, was substantiated. As a result of the conducted research, a method of coordinating configurations of the technologically integrated “European Green Deal” projects for the production of ecologically clean energy from agricultural waste in the territory of a given region, taking into account their specific project environment, was developed.... [more]

Heavy metal pollution is a serious concern of the modern era due to its widespread negative effects on human health and to the environment. Conventional technologies applied for the uptake of this category of persistent pollutants are complex, often expensive, and inefficient at low metal concentrations. In the last few years, non-conventional alternatives have been studied in search of better solutions in terms of costs and sustainability. Microbial adsorbents are one of the biomass-based sorbents that have extensively demonstrated excellent heavy metals removal capacity even at low concentrations. However, most of the carried-out research regarding their application in wastewater treatment has been performed in discontinuous systems. The use of microorganisms for the uptake of metal ions in continuous systems could be an important step for the upscale of the remediation processes since it facilitates a faster remediation of higher quantities of wastewaters loaded with heavy metals, i... [more]

Sleep Apnoea (SA) is a common chronic illness that affects nearly 1 billion people around the world, and the number of patients is rising. SA causes a wide range of psychological and physiological ailments that have detrimental effects on a patient’s wellbeing. The high prevalence and negative health effects make SA a public health problem. Whilst the current gold standard diagnostic procedure, polysomnography (PSG), is reliable, it is resource-expensive and can have a negative impact on sleep quality, as well as the environment. With this study, we focus on the environmental impact that arises from resource utilisation during SA detection, and we propose remote monitoring (RM) as a potential solution that can improve the resource efficiency and reduce travel. By reusing infrastructure technology, such as mobile communication, cloud computing, and artificial intelligence (AI), RM establishes SA detection and diagnosis support services in the home environment. However, there are conside... [more]