The purpose of the presented research is to assess pro-environmental behaviour (PEB) in European Union countries in 2009 and 2019. The study used a synthetic measure developed using the TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution) benchmark method. This method enables distinguishing classes and ranks of countries depending on the adopted characteristics. Basic measures of descriptive statistics, i.e., average, standard deviation and the coefficient of variation, were used in the analysis of the data set. The main research question addressed in this study concerns the relationship between the level of PEB and economic, demographic, and educational factors—not only on a micro scale but also from the macroeconomic perspective. The research has revealed a wide variety throughout the European Union (EU-27) countries in terms of pro-environmental behaviour. Sweden, Finland, and Denmark top the ranking, while Malta, Greece, Spain, and Romania are at the bottom of... [more]

This paper focuses on the loss estimation for the multiphase induction machine (IM) operating under fault-tolerant conditions through the field−circuit coupling finite element method (FEM). Both one-phase and two-phase open-circuit faults of a seven-phase IM are researched, and different spatial positions of the fault phases are taken into consideration. The magnitudes and phase angles of the residual phase’s current are deduced based on the principle of equal magnitude of the residual phase currents and unchanged fundamental magnetic motive force (MMF). The magnetic fields’ coupling between the fundamental and harmonic planes is analyzed. Then, the time-stepping electromagnetic fields calculation of the seven-phase IM are carried out under the commercial software Simplorer−Maxwell environment. The transient and steady performance for both the health and fault conditions are obtained based on the rotor field-oriented control (RFOC) strategy. The Joule loss and iron loss are calculated... [more]

Rapid changes in electricity power markets have increased the production costs of coal-fired power plants and pushed their production to the limits of profitability. For power plants currently in operation, a possible approach to cope with this issue is to introduce novel methods that increase the plant’s reliability and availability. Coal mills are a subsystem that should ensure a plant’s availability without unexpected breakdowns. Remediation-based maintenance is defined as a set of actions performed after fault detection that do not require instant shutdown due to safety reasons. The aim of this paper was to provide a scientific confirmation that by implementing a novel remediation-based maintenance strategy, electricity production breakdowns can be significantly reduced. First, the performance of the proposed maintenance method was proved in simulation where coal mills were modeled by generalized stochastic Petri nets. The maintenance strategy was then experimentally verified in a... [more]

The intensive increase of global warming every year affects our world negatively and severely. The use of renewable energy sources has gained importance in reducing and eliminating the effect of global warming. To this end, new technologies are being developed to facilitate the use of these resources. One of these technological developments is the floating wind turbine. In order to evaluate the respective environmental footprint of these systems, a life cycle assessment (LCA) is herein applied. In this study, the environmental impact of floating wind turbines is investigated using a life cycle assessment approach and the results are compared with the respective ones of onshore and jacket offshore wind turbines of the same power capacity. The studied floating wind turbine has a square foundation that is open at its centre and is connected to the seabed with a synthetic fibre-nylon anchorage system. The environmental impact of all life cycles of such a structure, i.e., the manufacture, t... [more]

The overall building performance depends mainly on the energy performance, indoor air quality, and moisture performance. In order to accurately calculate the building performance, the development of a model with the ability to integrate all three performances is required. In this research, a combination of three models namely EnergyPlus for energy, CONTAM for indoor air quality, and WUFI for moisture transport are used to develop an integrated model. The mechanism of this combination is based on the exchange of temperatures, airflows, and heating-cooling flows control variables between all three sub-models. By using the paired sample t-test, an integrated model is verified and its accuracy is validated. The accuracy of the integrated model is verified by the paired sample t-test. In order to analyze the accuracy of the integrated model in comparison with single models, four scenarios of airtight fan off, airtight fan on, leaky fan off, and leaky fan on are defined for a three-story-hou... [more]

Depletion of fossil fuel deposits is the main current issue related to the world’s power generation. Renewable energy sources integrated with energy efficiency represent an effective solution. The electrification of end-use coupled with renewable power generation integration is considered as an important tool to achieve these tasks. However, the current electric power system does not currently have the suitable features to allow this change. Therefore, in the future, it has to allow two-way direction power flows, communication, and automated controls to fully manage the system and customers. The resulting system is defined as the smart grid. This article analyses the smart grid state of play within China, the US, and the EU, assessing the completion state of each smart grid technology and integrated asset. The analysis related to these countries presented here shows that the smart grid overall state of play in China, the US, and the EU are equal to 18%, 15%, and 13%, respectively, unve... [more]

The regulatory environment for both sustainability and financial reporting is changing as standardisation and digital reporting (e.g., XBRL) are gaining traction within regulators. The measurement methodology and mandatory information content of disclosures are yet to be decided for corporate CO2 reporting by EU regulators and standard-setting organisations. In our study, we reviewed the sustainability reports of three leading German automotive groups by revenue for the period 2016−2020 as a case study. The research methodology was carried out with text-mining-aided content analysis to provide a collection of sustainability standards (GRI and SASB) in the evaluation of emissions reporting. As an addition to prior literature, conditions of relevance and clarity regarding published information were introduced in the evaluation process of compliance to CO2 disclosures. Companies by reporting practice were assigned to different stages of carbon management and actual emissions were evaluate... [more]

The Algerian economy and electricity generation sector are strongly dependent on fossil fuels. Over 93% of Algerian exports are hydrocarbons, and approximately 90% of the generated electricity comes from natural gas power plants. However, Algeria is also a country with huge potential in terms of both renewable energy sources and industrial processes waste heat recovery. For these reasons, the government launched an ambitious program to foster renewable energy sources and industrial energy efficiency. In this context, steam and organic Rankine cycles could play a crucial role; however, there is a need for reliable and time-efficient optimization tools that take into account technical, economic, environmental, and safety aspects. For this purpose, the authors built a mathematical tool able to optimize both steam and organic Rankine units. The tool, called Improved Rankine Cycle Plant Designer, was developed in MATLAB environment, uses the Genetic Algorithm toolbox, acquires the fluids th... [more]

Decarbonisation is becoming a central aim of countries around the globe, ensuring the effects of climate change do not increase exponentially in the coming years. Renewable energy generation is at the core of this decarbonisation process, enabling economies to divorce themselves from a reliance on oil and coal. Hybrid energy systems can utilise multiple generation methods to supply electrical demand best. This paper investigates the use of localised hybrid energy systems around the UK, comparing the financial viability of solar, wind and hydrokinetic generation methods both as a hybrid system and individually in different scenarios. The significance of having localised hybrid energy systems is that they address two large problems within renewable energy generation, that of storage issues and also generating the electricity far away from where it is actually used, requiring extensive infrastructure. The microgrid optimisation software HOMER was used to simulate each of the generation me... [more]

The Belt and Road investment involves a large number of renewable energy projects, but whether the energy efficiency is linked to the Belt and Road Initiative (BRI) cooperation has yet to be established in the literature. This research attempts to close this gap by looking at how the BRI affects the energy efficiency of participating nations after the fact through a counterfactual analysis. Based on the Difference-in-Difference-in-Difference (DDD) and quantile DID methods for the panel dataset covering 178 nations and areas for the period of 2002 to 2018, we explored the impacts of BRI on energy efficiency vary by different energy efficiency quantiles, resource endowments, and income levels. First, the positive effects of BRI are significant in medium-and high-energy efficiency quantiles but are not significant in low-energy efficiency quantiles for up to 30%. Second, the BRI tends to increase more energy efficiencies in resource-rich BRI countries than those in resource-poor BRI count... [more]

The implementation of new mobility solutions based on electric vehicles such as electric cars, electric scooters, and electric bikes, in urban transport systems, may bring several advantages for society, from environmental and economic benefits to improved quality of life. Nevertheless, we witness a scarcity of education and promotion that supports electric mobility, which can lead to social barriers due to the lack of knowledge. Consequently, people may be discouraged from using new transport technologies. The article focuses on electric mobility issues and present the original concept of electric mobility education. The goal of the work is to identify appropriate educational methods, useful during teaching about electric mobility at different levels of education. The concept focuses on education from primary school to long-life learning. Presented pedagogical concept is based on the three main pillars of pedagogy as diagnosis, forecasting, and content developing. It was developed bas... [more]

The present work provides an analysis of the potential impact of fossil-based Low Carbon Aviation Fuels (LCAF) for the European aviation sector, with a time horizon to 2050. LCAF are a crude-derived alternative to kerosene, offering some Green House Gas (GHG) savings, and have been defined by ICAO as eligible fuels for mitigating the environmental impact of aviation. A methodological framework to evaluate the EU technical potential for LCAF production is developed, based on data on crude utilization for jet fuel production in EU refineries, relevant carbon intensity reduction technologies, market prices, and aviation fuel volumes. Two different baselines for fossil-derived kerosene carbon intensity (CI) are considered: a global figure of 89 gCO2e/MJ and an EU-27-specific one of 93.1 gCO2eq/MJ. Three scenarios considering increasing levels of CI reduction are then defined, taking into account the current and potential commercial availability of some of the most relevant carbon intensity... [more]

Our world is facing an environmental crisis that is driving scientists to research green and smart solutions in terms of the use of renewable energy sources and low polluting technologies. In this framework, photovoltaic (PV) technology is one of the most worthy of interest. Dye-sensitized solar cells (DSSCs) are innovative PV devices known for their encouraging features of low cost and easy fabrication, good response to diffuse light and colour tunability. All these features make DSSCs technology suitable for being applied to the so-called agrovoltaic field, taking into account their dual role of filtering light and supporting energy needs. In this project, we used 40 DSSC Z-series connected modules with the aim of combining the devices’ high conversion efficiency, transparency and robustness in order to test them in a greenhouse. A maximum conversion efficiency of 3.9% on a 221 cm2 active area was achieved with a transparency in the module’s aperture (312.9 cm2) area of 35%. Moreover... [more]

Electromobility is one of the leading trends transforming public transport worldwide. Supported by international organizations, such as the European Union, and national cofounding, public transport operators and local authorities are taking strategic decisions on the direction and scope of the electrification of rolling stock. Most of the electric buses that are being put into operation replace the previously used conventional buses, and consequently, most of the electric buses are operating on existing bus lines. By applying a strategic approach to selecting bus routes for electrification, the advantages of electric vehicles can be maximized. Based on a case study of the Polish city of Gdynia, this paper explores the usefulness of the multi-criteria analysis for selecting the bus lines for electrification. Multi-criteria analysis methods help decision makers to consider and weigh diverse criteria that include, among others, economic, social, technological and environmental aspects. To... [more]

An important trend in today’s economy is to reduce the carbon footprint of organizations, businesses and households. Modern technologies, including ICT solutions, contribute to the reduction of CO2 production. The article focuses on the potential of using the cloud computing model in managing a modern and intelligent city. Modern city offices have an extensive IT infrastructure. With the emergence of new services provided online by the offices, the server infrastructure is also developing. Server rooms together with additional devices are characterized by high demand for electricity. Along with this, significant amounts of CO2 are produced. An alternative is the use of Cloud Computing solutions, which contribute to a significant reduction of the carbon footprint. The paper analyses potential solutions that can be used in city offices. The benefits and positive impact on the environment were highlighted. The empirical research was conducted based on questionnaires received from city off... [more]

The growing interest in the negative environmental impact of overhead power lines of high and extra-high voltage stems from the increasing ecological awareness of societies. Consequently, a number of respective legal restrictions have been issued and actions have been undertaken to reduce this impact, especially in the electric field of the power frequency. The aim of this paper is to analyze the possibilities of reducing the width of electric field influence zones by changing the design parameters of power lines and defining the spatial distribution of its conductors. This analysis was carried out using the developed and experimentally verified models for determining the electric field and audible noise in the power line environment. The computational models were used to analyze the width of the electric field influence zones of 400 kV lines and the noise levels at the borders of these zones. The research focused on single and double circuit 400 kV power lines. It was revealed that a... [more]

According to the European Union (EU) regulations, EU members are obligated, among others, to improve the energy efficiency in the outdoor lighting sector. One of the ways to consider this fact is to install LED sources in luminaires. Due to the reasonable lighting requirements for the lighting of squares and parks, the cheapest way to modernize lighting is to replace conventional discharge lamps with LED sources in park luminaires. Using nine typical park luminaires, the influence of replacing classic sodium lamps with LED sources on the effect of light pollution and energy efficiency was analyzed. Using data, such as a photometric solid and a relative spectral distribution, simulation calculations were carried out in DIALux software and our own calculation tool to consider this issue. The studies considered 156 LED sources of different spectral distributions and a wide range of color temperatures from 1000 K to 9753 K as well as different color rendering index (CRI) values. The conduc... [more]

In the world, as in Lithuania, there is a costant search for new crops suitable for energy conversion. The coarse-energy crops and their biomass studied for this paper were assessed in a comprehensive manner, i.e., not only their calorific value and ash content but also their ash melting properties and pollutants emitted during the thermochemical conversion. The calorific value of energy crops varies from 17.92 ± 0.32 to 18.50 ± 0.66 MJ kg−1 and decreases in the following order: A. dubia > M. giganteus > C. sativa. Ash content varies from 1.51 ± 0.03 to 3.36 ± 0.23% and decreases in the following order: C. sativa > A. dubia > M. giganteus. The lowest primary ash deformation (648 ± 8 °C) was recorded for C. sativa. Taking into account the specificity of our research and the changes in biomass ash content due to mineral nitrogen fertilization, it has been found that that higher levels of nitrogen fertilizers in the combustion products reduce CO and increase the total CO2 content of the c... [more]

In December 2019, the European Commission unveiled an ambitious project, the European Green Deal, which aims to lead the European Union to climate neutrality by 2050. This is a significant challenge for all EU countries, and especially for Poland. The role of hydrogen in the processes of decarbonization of the economy and transport is being discussed in many countries around the world to find rational solutions to this difficult and complex problem. There is an ongoing discussion about the hydrogen economy, which covers the production of hydrogen, its storage, transport, and conversion to the desired forms of energy, primarily electricity, mechanical energy, and new fuels. The development of the hydrogen economy can significantly support the achievement of climate neutrality. The belief that hydrogen plays an important role in the transformation of the energy sector is widespread. There are many technical and economic challenges, as well as legal and logistical barriers to deal with in... [more]

Utilizing underground coal gasification cavities for carbon capture and sequestration provides a potentially economic and sustainable solution to a vexing environmental and energy problem. The thermal influence on creep properties and long-term permeability evolution around the underground gasification chamber is a key issue in UCG-CCS operation in containing fugitive emissions. We complete multi-step loading and unloading creep tests with permeability measurement at confining stresses of 30 MPa on pre-cracked sandstone specimens thermally heat-treated to 250, 500, 750 and 1000 °C. Observations indicate a critical threshold temperature of 500 °C required to initiate thermally-induced cracks with subsequent strength reduction occurring at 750 °C. Comparison of histories of creep, visco-elastic and visco-plastic strains highlight the existence of a strain jump at a certain deviatoric stress level—where the intervening rock bridge between the twin starter-cracks is eliminated. As the devi... [more]

In recent years, the use of biodegradable fluids as liquid insulation for distribution and power transformers is spreading. The main biodegradable fluids used are natural and synthetic esters, although biodegradable hydrocarbons have been recently proposed. Biodegradable fluids have a much lower environmental impact than mineral oil, limiting the risk of soil contamination in leaks, which makes them a suitable solution for applications such as offshore transformers or railway transformers. Additionally, these fluids have a higher flash point than conventional mineral oils, which dramatically reduces the risk of fire and collateral damage derived from explosion and fire. Despite these advantageous factors, there are still some aspects that hinder the broadening of their use, such as the difference in thermal properties or the lack of accepted maintenance procedures for transformers that use them as liquid insulation. This paper presents the current status of biodegradable insulating flu... [more]

Isolation of spent nuclear fuel assemblies in deep vertical boreholes is analyzed. The main safety features of the borehole concept are related to the repository’s great depth, implying (a) long migration distances and correspondingly long travel times, allowing radionuclides to decay, (b) separation of the repository from the dynamic hydrological cycle near the land surface, (c) stable geological and hydrogeological conditions, and (d) a geochemically reducing environment. An integrated simulation model of the engineered and natural barrier systems has been developed to examine multiple scenarios of the release of radionuclides from the waste canisters, the transport through a fractured porous host rock, and the extraction of potentially contaminated drinking water from an aquifer. These generic simulations include thermal effects from both the natural geothermal gradient and the heat-generating waste, the influence of topography on regional groundwater flow, moderated by salinity str... [more]

The physical environment of classrooms has a strong relationship with student learning performance and health. Since the outbreak of COVID-19 in 2019, almost all universities have begun implementing closed instructional management, which has forced students to spend a much longer amount of time inside the classroom. This has also led to an increasing problem of thermal comfort in classroom indoor environments. In this paper, classrooms evolved from three dominant teaching modes at Zhejiang Sci-Tech University (ZSTU), located in the Hot Summer and Cold Winter (HSCW) zone of China, were selected as experimental spaces. Meanwhile, 12 learning groups with 60 students (30 of each sex) were selected as the tested samples. The relationship between thermal comfort and learning efficiency of the tested students was established through thermal comfort questionnaires and learning efficiency tests under the typical natural conditions in transition seasons. Based on this, improvement strategies wer... [more]

A new DC fault current limiter (FCL)-based circuit breaker (CB) for DC microgrid (MG) clusters is proposed in this paper. The analytical expressions of the DC fault current of a bidirectional interlink DC/DC converter in the interconnection line of two nearby DC MGs are analyzed in detail. Meanwhile, a DC fault clearing solution (based on using a DC FCL in series with a DC circuit breaker) is proposed. This structure offers low complexity, cost, and power losses. To assess the performance of the proposed method, time-domain simulation studies are carried out on a test DC MG cluster in a MATLAB/Simulink environment. The results of the proposed analytical expressions are compared with simulation results. The obtained results verify the analytical expression of the fault current and prove the effectiveness of the proposed DC fault current limiting and clearing strategy.

The present paper deals with issues related to activities undertaken by local government. The article focuses on the identification and assessment of the significance of local government’s different bottom-up initiatives that support development of local entrepreneurship. The article also indirectly discusses the importance of activities referring to energy efficiency. Through the digitization process and by using digital tools, LGs realize projects, improve local actors’ awareness, and finally achieve new challenges such as a higher proportion of gross final energy consumption being from renewable sources. The aim of the paper is to present the relationship between the LGs’ entrepreneurial activities, which we call bottom-up initiatives, and the local entrepreneurship level, understood as the number of entrepreneurs active on the territory of a LG. This paper presents the results of research carried out on the bottom-up initiatives undertaken by Polish local governments to support ent... [more]