The energy sector in Poland is currently calling for dynamic redevelopment and cleaner energy. This country is world famous for its high level of coal production, from which it does not want to retreat in the next two decades. For this reason, it is safer to gradually reduce the use of coal while increasing the consumption of gas and simultaneously developing green energy. However, the Polish gas sector is still dependent on Russian gas supplied through the Yamal gas pipeline. Taking into consideration Polish geopolitics, this state of affairs poses a huge challenge and a threat to Poland’s energy security. That is why the concept of the North-South Gas Corridor was introduced. It is intended to be a network of gas pipelines that connect the countries of Central and South Europe to two gas terminals (in Poland and Croatia), which will supply gas from a chosen source. This article presents the current condition of the gas sector in Poland. It focuses on the North-South Gas Corridor proj... [more]

The liberalization of the gas market has deeply affected the structure of the gas system. The change from a vertically integrated utility structure to a liberalized architecture has resulted in a new network asset where aggregators could play a key role. To enable aggregators’ functionalities, the gas system has moved to a smart configuration. The development of this Advanced Metering Infrastructure (AMI) allowing a two-way communication between the utility and the consumers, together with demand response programs, prove to be an advantageous solution. Utilities are allowed to manage consumers’ gas load by asking them to reduce or shift their gas usage so that rebates or back payments could be available for consumers. In this framework, aimed at ensuring the feasibility of the gas system and promoting the aggregation of small gas loads, a new agent has been identified. In this research, the potential of district heating systems as gas market aggregators, together with a novel architect... [more]

Azerbaijan signed the Paris Agreement in 2016 and committed to cut greenhouse gas (GHG) emissions by 35% in 2030. Meanwhile, natural gas has been vital component in the total energy mix of Azerbaijan economy and accounted for almost 65% of the total energy consumption. In the overall electricity mix, natural gas-fired power plants generate 93% of the country’s electricity. Since global energy consumption is responsible for 73% of human-caused greenhouse-gas emissions, and CO2 makes up more than 74% of the total, this study investigates possible mitigation effects of the natural gas consumption on CO2 emissions for Azerbaijan. Author employed several cointegration methodologies, namely Bound testing Autoregressive Distributed Lag (ARDL) approach, Fully Modified Ordinary Least Squares (FMOLS), Dynamic Ordinary Least Squares (DOLS), and Structural Time Series model (STSM). Author of this paper found that when the share of natural gas increases 1 percent in the total energy mix, CO2 emissi... [more]

The transmission of natural gas is a key element of the Polish energy system. The published data of the Polish distribution system operators and the transmission system operator on the volume of gaseous fuel transmitted indicate a growing trend in the consumption of energy produced from natural gas. In connection with the energy transformation, switching energy generation sources from hard coal to natural gas in Poland, it is important for transmission operators to know the future demand for gaseous fuel. The aim of the article is to attempt to develop an econometric model related to the consumption of gaseous fuel by Polish entrepreneurs. The knowledge therein may be useful for making business decisions related to the possible expansion of the transmission system, and thus investing financial resources for this purpose. This knowledge will also provide quantitative information related to the interest in gaseous fuel among industrial consumers and the analysis of the trend of natural g... [more]

The flammable hydrogen-blended methane−air and natural gas−air mixtures raise specific safety and environmental issues in the industry and transportation; therefore, their explosion characteristics such as the explosion limits, explosion pressures, and rates of pressure rise have significant importance from a safety point of view. At the same time, the laminar burning velocities are the most useful parameters for practical applications and in basic studies for the validation of reaction mechanisms and modeling turbulent combustion. In the present study, an experimental and numerical study of the effect of hydrogen addition on the laminar burning velocity (LBV) of methane−air and natural gas−air mixtures was conducted, using mixtures with equivalence ratios within 0.90 and 1.30 and various hydrogen fractions rH within 0.0 and 0.5. The experiments were performed in a 14 L spherical vessel with central ignition at ambient initial conditions. The LBVs were calculated from p(t) data, determ... [more]

Blending hydrogen into the natural gas infrastructure is becoming a very promising practice to increase the exploitation of renewable energy sources which can be used to produce “green” hydrogen. Several research projects and field experiments are currently aimed at evaluating the risks associated with utilization of the gas blend in end-use devices such as the gas meters. In this paper, the authors present the results of experiments aimed at assessing the effect of hydrogen injection in terms of the durability of domestic gas meters. To this end, 105 gas meters of different measurement capabilities and manufacturers, both brand-new and withdrawn from service, were investigated in terms of accuracy drift after durability cycles of 5000 and 10,000 h with H2NG mixtures and H2 concentrations of 10% and 15%. The obtained results show that there is no metrologically significant or statistically significant influence of hydrogen content on changes in gas meter indication errors after subject... [more]

We extend the widely-studied Heterogeneous Autoregressive Realized Volatility (HAR-RV) model to examine the out-of-sample forecasting value of climate-risk factors for the realized volatility of movements of the prices of crude oil, heating oil, and natural gas. The climate-risk factors have been constructed in recent literature using techniques of computational linguistics, and consist of daily proxies of physical (natural disasters and global warming) and transition (U.S. climate policy and international summits) risks involving the climate. We find that climate-risk factors contribute to out-of-sample forecasting performance mainly at a monthly and, in some cases, also at a weekly forecast horizon. We demonstrate that our main finding is robust to various modifications of our forecasting experiment, and to using three different popular shrinkage estimators to estimate the extended HAR-RV model. We also study longer forecast horizons of up to three months, and we account for the poss... [more]

Hydrogen is increasingly receiving a primary role as an energy vector in ensuring the achievement of the European decarbonization goals by 2050. In fact, Hydrogen could be produced also by electrolysis of water using renewable sources, such as photovoltaic and wind power, being able to perform the energy storage function, as well as through injection into natural gas infrastructures. However, hydrogen injection directly impacts thermodynamic properties of the gas itself, such as density, calorific value, Wobbe index, sound speed, etc. Consequently, this practice leads to changes in metrological behavior, especially in terms of volume and gas quality measurements. In this paper, the authors present an overview on the impact of hydrogen injection in natural gas measurements. In particular, the changes in thermodynamic properties of the gas mixtures with different H2 contents have been evaluated and the effects on the accuracy of volume conversion at standard conditions have been investig... [more]

To reduce the greenhouse effect, it is important to reduce not only carbon dioxide but also methane emissions. Methane gas can be not only a fossil fuel (natural gas) but also a renewable energy source when it is extracted from biomass. After biogas has been purified, its properties become closer to those of natural gas or methane. Natural gas is an alternative energy source that can be used for spark-ignition engines, but its physicochemical properties are different from those of gasoline, and the spark-ignition engine control parameters need to be adjusted. This article presents the results of a study that considers a spark-ignition engine operating at different speeds (2000 rpm, 2500 rpm, and 3000 rpm) and the regulation of the timing of intake valve closure when the throttle is partially open (15%), allowing the engine to maintain the stoichiometric air−fuel mixture and constant spark timing. Studies have shown a reduction in engine break torque when petrol was replaced by natural... [more]

This work aims to present an analysis of electricity and natural gas supply security in the four European Union countries with the highest level of consumption, namely Germany, France, Italy, and Spain. The goal of the study is to use and adapt a set of 22 indicators for estimating the level of energy security. The evaluation of an index called “Energy Security Level”, measuring the overall energy security, is performed for the period 2006−2018 in order to compare its evolution in each of the analyzed countries. The application of the proposed indicator system demonstrates which measures weakened or strengthened energy security in the past. The analysis of the energy security level demonstrates that Germany and France perform better than Italy and Spain in terms of energy security assurance. The main factors for these differences are the rich energy mix for Germany and the massive presence of nuclear power in France. These two elements make German and French energy systems more resilie... [more]

While operating at light loads, diesel pilot-ignited natural gas engines with lean premixed natural gas suffer from poor combustion efficiency and high methane emissions. This work investigates the limits of low-load operation for a micro-pilot diesel natural gas engine that uses a stoichiometric mixture to enable methane and nitrogen oxide emission control. By optimizing engine hardware, operating conditions, and injection strategies, this study focused on defining the lowest achievable load while maintaining a stoichiometric equivalence ratio and with acceptable combustion stability. A multi-cylinder diesel 6.7 L engine was converted to run natural gas premix with a maximum diesel micro-pilot contribution of 10%. With a base diesel compression ratio of 17.3:1, the intake manifold pressure limit was 80 kPa(absolute). At a reduced compression ratio of 15:1, this limit increased to 85 kPa, raising the minimum stable load. Retarding the combustion phasing, typically used in spark-ignitio... [more]

This article highlights the need to reduce carbon dioxide emissions by reducing energy consumption. Of course, this can be achieved in various ways, but inter alia, through the practical implementation of the assumptions contained in the CSR programs of individual companies, which include a component on environmental protection and counteracting global warming. The authors also describe a proposal to reduce CO2 emissions by using coke oven gas (if necessary) in exchange for natural gas. Currently, the largest sources of carbon dioxide emissions are the combustion of fossil fuels in power plants, transport—cars and planes, processes related to the production of industrial goods, and deforestation. In the preparation of the article, the analysis of the literature on the subject, analysis of documents, desk research, and two case studies were used. The main goal of the article is to present the possibilities of reducing CO2 emissions by implementing the assumptions of the CSR policy on th... [more]

Simulating the phase behavior of a reservoir fluid requires the determination of many parameters, such as gas−oil ratio and formation volume factor. The determination of such parameters requires knowledge of the critical properties and compressibility factor (Z factor). There are many techniques to determine the compressibility factor, such as experimental pressure, volume, and temperature (PVT) tests, empirical correlations, and artificial intelligence approaches. In this work, two different models based on statistical regression and multi-layer-feedforward neural network (MLFN) were developed to predict the Z factor of natural gas by utilizing the experimental data of 1079 samples with a wide range of pseudo-reduced pressure (0.12−25.8) and pseudo reduced temperature (1.3−2.4). The statistical regression model was proposed and trained in R using the “rjags” package and Markov chain Monte Carlo simulation, while the multi-layer-feedforward neural network model was postulated and train... [more]

Several North American utilities are planning to blend hydrogen into gas grids, as a short-term way of addressing the scalable demand for hydrogen and as a long-term decarbonization strategy for ‘difficult-to-electrify’ end uses. This study documents the impact of 0−30% hydrogen blends by volume on the performance, emissions, and safety of unadjusted equipment in a simulated use environment, focusing on prevalent partially premixed combustion designs. Following a thorough literature review, the authors describe three sets of results: operating standard and “ultra-low NOx” burners from common heating equipment in “simulators” with hydrogen/methane blends up to 30% by volume, in situ testing of the same heating equipment, and field sampling of a wider range of equipment with 0−10% hydrogen/natural gas blends at a utility-owned training facility. The equipment was successfully operated with up to 30% hydrogen-blended fuels, with limited visual changes to flames, and key trends emerged: (a... [more]

Combatting climate change necessitates a substantial global increase in renewable electricity capacity. Many low-income and lower-middle-income countries suffer from unfavorable green financing conditions. Fifteen of these countries possess substantial natural gas reserves. To overcome green financing constraints in such countries, we propose an integrated energy contract that awards a renewable energy project in parallel with an upstream natural gas project to interested energy companies. The state returns from the natural gas project provide a guarantee for renewable energy investments, reducing their associated risks. We conduct Monte Carlo simulations for each of the targeted countries after populating the input parameters for the upstream natural gas and renewable energy projects, including forecasting country-specific natural gas prices. When accounting for 10% of their existing natural gas reserves in the proposed contract, Nigeria, Myanmar, and Indonesia can achieve more than 6... [more]

This article discusses methods of enhanced power generation using a binary power system with low-boiling fluid as an intermediate energy carrier. The binary power system consists of micro-gas and steam power units and is intended for remote standalone power supply. Trifluotrichloroethane was considered as the working agent of the binary cycle. The developed system was modeled by two parts in MATLAB Simulink and Aspen HYSYS. The model in Aspen HYSYS calculates the energy and material balance of the binary energy system. The model in MATLAB Simulink investigates the operation of power electronics in the energy system for quality power generation. The results of the simulation show that the efficiency of power generation in the range of 100 kW in the developed system with micro-turbine power units reaches 50%.

In this study, a mathematical model for the supersonic condensate flow of natural gas to understand its condensation process in a supersonic separator has been proposed. The effects of export back pressure, inlet temperature, and inlet pressure on the condensation parameters were investigated. The results indicate that the condensation position moves forward with the increase in the inlet pressure and the decrease in the inlet temperature. A method for determining the optimal range of operating parameters (export back pressure, inlet temperature, and inlet pressure) for the supersonic separator is proposed. Within the optimal back pressure range, the region of extreme Mach number in the device should be at the inlet of the straight pipe section after the separation gap, and extreme value distribution areas of low temperature, condensation nucleation, and humidity should be between the nozzle expansion section and the inlet of the straight pipe section. It is important to choose a highe... [more]

Most of the developing oil and gas fields in Russia are located in Arctic regions and constructed on permafrost, where recent environmental changes cause multiple hazards for their infrastructure. The blowing-up of pingos, resulting in the formation of gas emission craters, is one of the disastrous processes associated both with these external changes and, likely, with deep sources of hydrocarbons. We traced the channels of fluid migration which link a gas features reservoirs with periglacial phenomena associated with such craters with the set of geophysical methods, including common depth point and shallow transient electromagnetic methods, on an area of a prospected gas field. We found correlated vertical anomalies of acoustic coherence and electrical resistivity associated with gas chimneys in the upper 500−600 m of the section. The thickness of the ice-bonded permafrost acting as a seal for fluids decreased in the chimney zone, forming 25−50 m deep pockets in the permafrost base. T... [more]

The United Nations Framework Convention on Climate Change Paris Agreement has been announced as a crucial step towards combating the global threat of climate change. In the light of ambitious plans for further renewable energy sources development, high demand for nonenergy materials critical for RES is greatly expected. In conclusion, future energy security will be surely based on nonenergy commodities critical for them. As this article directly relates to issues related to new technologies and energy security in new form, the main purpose of this study is to examine the impact of energy commodity prices, namely crude oil, natural gas and coal prices on selected metal prices such as aluminium, chromium, cobalt, copper, lead, nickel, silver, tin, or zinc, both before and over the Paris Agreement period. We are looking for new insights in terms of relationships between traditional fossil fuels and metals used in clean energy technologies potentially established or strengthened shortly af... [more]

This paper presents a method for multi-period optimization of natural gas and electric power systems incorporating gas-fired power plants to analyze the impact of the interdependence between those commodities, in terms of cost and energy supply. The proposed method considers electricity network constraints, such as voltage profile, electrical losses, and limits of the transmission lines, as well as the technical restrictions on the gas network, such as the diameter, length, pressure, and limits for those variables. The proposed method was applied to a 12-bus electric network and a 7-node gas network, and several interdependencies between the electricity and the natural gas system network can be observed. The results show how the restrictions cause the behavior of the gas-fired power plants—in a low demand stage, it is restricted even when the gas-fired power generation prices are below the hydraulic generation prices, while in scenarios of higher demand, saturated cargo flows are obser... [more]

Research in the field of Internal Combustion (IC) engines focuses on the drastic reduction of both pollutant and greenhouse gas emissions. A promising alternative to gasoline and diesel fuel is represented by the use of gaseous fuels, above all green hydrogen but also Natural Gas (NG). In previous works, the authors investigated the performance, efficiency, and emissions of a supercharged Spark Ignition (SI) engine fueled with mixtures of gasoline and natural gas; a detailed research involving the combustion process of this kind of fuel mixture has been previously performed and a lot of experimental data have been collected. Combustion modeling is a fundamental tool in the design and optimization process of an IC engine. A simple way to simulate the combustion evolution is to implement a mathematical function that reproduces the mass fraction burned (MFB) profile; the most used for this purpose is the Wiebe function. In a previous work, the authors proposed an innovative mathematical m... [more]

Under the idea of low carbon economy, natural gas has drawn widely attention all over the world and becomes one of the fastest growing energies because of its clean, high calorific value, and environmental protection properties. However, policy and political factors, supply-demand relationship and hurricanes can cause the jump in natural gas prices volatility. To address this issue, a deep learning model based on oil and gas news is proposed to predict natural gas price trends in this paper. In this model, news text embedding is conducted by BERT-Base, Uncased on natural gas-related news. Attention model is adopted to balance the weight of the news vector. Meanwhile, corresponding natural gas price embedding is conducted by a BiLSTM module. The Attention-weighted news vectors and price embedding are the inputs of the fused network with transformer is built. BiLSTM is used to extract used price information related with news features. Transformer is employed to capture time series trend... [more]

Various gas pipeline networks used for the transit of energy sources are some of the most important infrastructures. However, carrying gas from one point to another is not the only concern when planning the construction of a new network or expanding an already existing one. The reliability and environmental impact of the system are crucial when evaluating the network and risks posed by potential gas leaks, fires, explosions, etc. Even though everyone admits that reliability is a key aspect of any system, its constraints will still be most likely neglected in the assessment of the pipeline project. How much energy is wasted by pushing an additional amount of gas through the pipeline network, which will eventually gush out of the pipeline because of one crack or another? Moreover, if this additional power or fuel consumption and related environmental impact are significant, how could it be reduced? In this paper, an approach is introduced for the simulation and quantification of how much... [more]

Reliance on natural gas for power generation has increased the coupling between gas and power networks. While this coupling can bring operational and economic benefits, it can also yield challenges, as the constraints in one system can impact the other. Co-simulation can capture the constraints and interactions between these systems, but so far, there has been limited comparison of co-simulation results to those of an integrated model. In this work, we develop a new co-simulation framework using the HELICS platform and the SAInt tool for modeling transient gas and AC optimal power flow. We evaluate this co-simulation framework against a fully integrated version of the SAInt power and gas simulators, thus providing a benchmarking of the co-simulation approach. We compare results across the two approaches for two test networks and a network representing the Belgian power and gas networks, testing both normal operating conditions and cases with compressor disruptions. In each of the cases... [more]

Natural gas has returned to prominence in the agenda of European countries since the beginning of the invasion of Ukraine by Russia in 2022. However, natural gas is a fossil source with severe environmental implications. This paper aims to verify the impact of natural gas on carbon dioxide (CO2) emissions for a European panel from 1993 to 2018 for sixteen countries. An Autoregressive Distributed Lag (ARDL) model in the form of an unrestricted error correction model was used to identify the short-run impacts, the long-run elasticities, and the speed of adjustment of the model. The results indicate that in the short-run, natural gas has a negligible impact on CO2 emissions when faced with oil consumption (6.7 times less), whereas the consumption of renewables and hydroelectric energy proved to be able to decrease the CO2 emissions both in the short- and long-run. The elasticity of oil consumption is lower than the unit, indicating that efficiency gains have been achieved during the proce... [more]