Islands are widely recognised as ideal pilot sites that can spearhead the transition to clean energy and development towards a sustainable and healthy society. One of the assumptions underpinning this notion is that island communities are more ready to engage with smart grids (SGs) than people on the mainland. This is believed to be due to the high costs of energy on islands and the idea that the sense of community and collective action is stronger on islands than on the mainland. This paper presents findings from a survey conducted to assess people’s perception of, and readiness to engage with, SG and demand response (DR) in the communities of three islands taking part in a H2020 project called REACT. The main objective of the survey, conducted in 2020, was to inform the recruitment of participants in the project, which is piloting different technologies required for SGs and DR with communities on the three islands. The results show that many island residents are motivated to take par... [more]

The aim of this study is to highlight the need for sustainable urban development by reviewing the different Indicator Systems (SI) and contrasting them with those factors that have had a correlation in the spread of the virus in order to detect its deficiencies. This research carries out an urban diagnosis and analyzes the influence of these factors in order to detect deficiencies and propose a new IS adapted to current needs. Lastly, the new SI is validated through its practical application in one of the Autonomous Communities most affected by the pandemic in Spain. It is concluded that most of the factors causing a worse incidence of the virus are hardly evaluated by the existing IS. The practical analysis shows that there are deficiencies in urban design, resulting in poor environmental quality and urban morphology.

Meeting the increasing global energy demand in a sustainable way is a major challenge for humanity. One of the solutions in the transportation sector is ethanol, which is currently the only economically viable direct fuel substitute. In addition to the first-generation technology, which provides the vast majority of production, better results can be continuously realized by using advanced technologies. This study aims to investigate the economic aspects and sustainability issues of ethanol production with a systematic literature review. During the selection process, 64 studies from a total of 16,141 identified articles were analyzed in-depth. There is a consensus that first-generation production methods cannot result in a long-term solution. However, advanced technologies are currently immature, and ethanol production is more expensive with them. The use of wastes/residues and coproducts can improve both the economic outlook and sustainability of the advanced technologies. Overall, the... [more]

The purpose of this study was to apply new methods of econometric models to the Life Cycle Assessment (LCA) of physical assets, by integrating investments such as maintenance, technology, sustainability, and technological upgrades, and to propose a means to evaluate the Life Cycle Investment (LCI), with emphasis on sustainability. Sustainability is a recurrent theme of existing studies and will be a concern in coming decades. As a result, equipment with a smaller environmental footprint is being continually developed. This paper presents a method to evaluate asset depreciation with an emphasis on the maintenance investment, technology depreciation, sustainability depreciation, and technological upgrade investment. To demonstrate the value added of the proposed model, it was compared with existing models that do not take the previously mentioned aspects into consideration. The econometric model is consistent with asset life cycle plans as part of the Strategic Asset Management Plan of t... [more]

The aim of the research is to identify and quantify the direct sustainable effects resulting from the improved road infrastructure in the local urban-port transport system. This case study considers the city port of Szczecin (Poland). The effects are identified for the local road transport system by comparing freight road transport performance in two options: with the investment and without the investment. The sustainable effects are quantified in terms of money and physical units. Sustainable economic, social, and environmental effects concern generalized freight road transport cost, i.e., truck operating costs and costs of truck drivers’ working time, as well as freight transit time, energy consumption, greenhouse gas emissions, and environmental savings. To capture effects, the forecast of truck traffic demand, as well as unit vehicle operating costs, values of time, and air pollution and climate change, values are elaborated and revealed in freight road transport. The investigation... [more]

In this study, biological exhaust air treatment was combined with a recuperative heat exchanger in one process stage. The aim of this plant development and testing is not only to reduce ammonia from the exhaust air of pig houses but also to recover thermal energy at the same time. This is intended to offset the high operating costs of exhaust air treatment with savings of heating costs in cold seasons and to use the plant more efficiently. This system was tested for the first time under practical conditions in a pig fattening house in southern Germany. Three different assembly situations of the heat exchanger were examined for 13 days each and then compared with each other. The heating performance of the plant is primarily dependent on the outside air temperature and secondarily on the scrubbing water temperature. Depending on the assembly situation of the heat exchanger, an average heating performance of between 6.0 and 10.0 kW was observed; the amount of recovered thermal energy was... [more]

Passive thermal comfort has been widely used to test the thermal performance of a building. The science of active thermal comfort is important to be connected with the science of architecture. The currently developing active thermal comfort is adaptive thermal comfort. Vernacular houses are believed to be able to create thermal comfort for the inhabitants. The present study seeks to analyze the connection between the architectural elements of vernacular houses and adaptive thermal comfort. A mixed method was applied. A quantitative approach was used in the measurement of variables of climate, while a qualitative methodology was employed in an interview on thermal sensations. The connection between architectural elements and adaptive thermal comfort was analyzed by considering the correlation among architectural features, the analysis results of thermal comfort, and the Olgyay and psychrometric diagrams. At the beginning of the rainy season, residents of exposed stone houses had the hig... [more]

This article analyses the political discourse about governing the future of the aviation industry in Sweden and how a polarized and entrenched discursive path dependency around aviation makes it difficult to invest into aviation’s possible futures as a sustainable transport. We find three different politically merged frames in the political discussion about governing the road to sustainable aviation: (1) Neoliberal sustainable aviation, (2) Green Keynesian sustainable aviation and (3) National environmentalists’ aviation. We can see a discrepancy between two merged frames that believe sustainable aviation will be possible with more or less government support and steering (Neoliberal sustainable aviation and Green Keynesian sustainable aviation) whereas the third merged frame (National environmentalists’ aviation) argues that aviation is bound to be environmentally inferior to trains and, therefore, all focus should go to the later. We can see that there is not just a path dependency in... [more]

This article has been developed to assess the economic feasibility of a rooftop photovoltaic installation of industrial self-consumption. Numerical models that enable an interested person to obtain the main expected parameters will be generated, with those models being the article’s main contribution to the field. To do this, a calculation methodology will be developed through which the reader, knowing the location of the facility and dimensions of the roof, will be able to calculate the maximum installable power, the main parameters related to production, the cost of the installation, and the LCOE of the plant. The use of actual costs will be facilitated in case they are known. Still, it will remain possible to apply the major equipment costs (modules, inverter, and structure) considered throughout the article. This developed calculation methodology will also allow a quick comparison of the forecasts of production, CAPEX, and LCOE of plants designed with different inclinations and dif... [more]

Herein, we proposed new two-stage processing of blackcurrant pomace toward a value-added, hydrocarbon-rich biocrude fraction. The approach consisted of thermochemical liquefaction of a wet-type organic matter into liquid biocrude followed by its upgrade by thermal and catalytic pyrolysis. Particularly, we put effort into investigating the effect of selected catalysts (ZSM-5 and HY zeolite) on the composition of the volatiles released during the pyrolysis of the biocrude. The latter was obtained through liquefaction of the raw material in the binary solvent system of water and isopropanol. The biocrude yield accounted for ca. 45 wt.% of the initial dry biomass. It was a complex mixture of various component groups with an abundant share of oxygenates, especially carboxylic acids and esters. Thereafter, the biocrude was subjected to a pyrolysis study performed by means of the microscale coupled pyrolysis-gas chromatography-mass spectrometry technique (Py-GC-MS). The dominant components id... [more]

In a planet with limited resources, climate change is a severe problem, intensified by industrial development. This is particularly important in the construction sector. According to the International Energy Agency (2021), the construction sector is responsible for 40% of the global energy consumption and 36% of CO2 emissions. In this way, sustainable architectural solutions should be a priority in our fight against climate change, for it is necessary to propose solutions that help to reuse existing resources, thus reducing consumption. In this sense, the rehabilitation of buildings with solutions that favor the circular economy will become a key element in the construction sector. This work provides the design of a facade for building rehabilitation based on the circular economy paradigm, which is implanted in a model building as a case study. The HULC tool quantifies the improvement in energy efficiency that this rehabilitation entails when compared to a conventional facade. With the... [more]

The cold chain is responsible for perishable products preservation and transportation, maintaining a proper temperature to slow biological decay processes. Often the efficiency of the cold chain is less than ideal, significantly increasing food waste and energy consumption. Refrigerated transport is a critical phase of the cold chain because of its negative impact on energy consumption and greenhouse gas emissions. It is estimated that around 15% of global fossil fuel energy is used in the refrigerated transport sector, so there has been a growing interest in the last decades in the optimization of these systems in order to reduce their environmental impact. Vapor compression refrigeration units, usually powered by means of a diesel engine, are the most commonly used systems in road refrigerated transport. This paper provides a review of (a) currently used systems and alternative technologies that could reduce the environmental impacts of road refrigerated transport and (b) optimizatio... [more]

Sustainable agriculture relies on replacing fossil-based mineral fertilizers, which are highly cost-energetic to produce, and demand extensive use of scarce natural resources. Today, agronomic practices within the concept of circular economy are emerging and, as such, the exploitation of digestate as a biofertilizer and soil amender is extensively investigated. This study aimed at evaluating the agronomic potential of liquid digestate as the sole nutrient source for hydroponic cultivation of baby lettuce in greenhouses. Growth rate, physiological responses, concentration of secondary metabolites, and nutrient uptake were compared between baby leaf lettuce grown in digestate in concentrations of 5, 10, and 20% diluted in water (either with or without pH adjustment) and in Hoagland solution (control). Results showed that the production yield was negatively correlated with the concentration of the added digestate. Nevertheless, the antioxidant capacity was significantly enhanced in 5 and... [more]

Building more sustainable pavements for the future requires knowledge of alternative and innovative materials for utilization in future road construction and maintenance activities. Being mindful of this need, the present study investigates a Reacted and Activated Rubber (RAR) compound modifier with the aim of defining an optimal RAR percentage in Asphalt Concrete (AC) mixes. It is acknowledged that when this type of modifier is incorporated within an AC mix as an alternative for the bituminous binder material, the associated economic, environmental and social benefits are significant. Simply put, the use of RAR modifiers provides the potential to utilize a waste product (rubber tires) as a more sustainable alternative to bitumen within AC mixtures. However, it seems that the information about the overall performance of AC mixes modified with RAR is currently limited. On these grounds, the present study focuses on the surface course layer and evaluates (a) achieved physical characteris... [more]

Geothermal heat pumps have a widespread diffusion as they are able to deliver relatively higher energy output than other systems for building air-conditioning. The exploitation of low-enthalpy geothermal energy, however, presents crucial sustainability issues. This review investigates the primary forms of the environmental impact of geothermal heat pumps and the strategies for their mitigation. As life-cycle analyses shows that the highest impacts arise from installation and operation stages, most optimization studies focus on system thermodynamics, aiming at maximizing the energy performance via the optimization in the design of the different components interacting with the ground and serviced building. There are environmental studies of great relevance that investigate how the climate and ground properties affect the system sustainability and map the most suitable location for geothermal exploitation. Based on this review, ground-source heat pumps are a promising technology for the d... [more]

Consideration of sustainability in product development is becoming increasingly important and encompasses many aspects of product design. In this study, a bibliometric review of recent sustainable product design publications using Web of Science and VOSViewer is carried out. The review indicates that the majority of publications concerning sustainable product design is oriented towards environmental science-led subject areas and production-led journals. Analysis of author keyword co-occurrences reveals that circular economy, life cycle assessment, sustainable management, and optimization are the most popular topics in sustainable product design research. The analysis also reveals that the researchers fail to link sustainability research to activities in product design, which leads to the lack of access to relevant research that can make products more sustainable. Building on the findings, the authors propose four future research directions that aim to guide researchers to better correl... [more]

Water is increasingly taking center stage when it comes to coping with climate change. Especially in urban areas, negative consequences from heavy rainfall events and prolonged dry periods are rising worldwide. In the past, the various tasks of urban water management were performed by different departments that often did not cooperate with each other (water supply, wastewater disposal, green space irrigation, etc.), as the required water supply was not a question of available water volumes. This is already changing with climate change, in some cases even dramatically. More and more, it is necessary to consider how to distribute available water resources in urban areas, especially during dry periods, since wastewater treatment is also becoming more complex and costly. In the future, urban water management will examine water use in terms of its various objectives, and will need to provide alternative water resources for these different purposes (groundwater, river water, storm water, tre... [more]

Industry 4.0 challenges facilities entrepreneurs to be competitive in the market in terms of energy by rational decision making. The goal of the paper is aimed at introducing Prospect Theory (PT) in Industry 4.0 for making decisions in order to select an optimal energy technology. To reach this goal, an approach for decision making on energy investment has been developed. In this paper, the authors have also provided a new opportunity to apply the new decision making method for strengthening Industry 4.0 by addressing energy concerns based on which rational decisions have been made. The study uses a fuzzy analytical hierarchy process for weighting the evaluation sub-criteria of energy technologies and a modified PT for making decisions related to the selection of one of the investigated technologies. The results show that it is possible to implement PT in Industry 4.0 via a decision making model for energy sustainability. Decision probability was achieved using a behavioral approach ak... [more]

The COVID-19 pandemic has generated multiple impacts. In particular, in the educational sector, the virtual class modality generated changes in the patterns of energy consumption at the institutional level; the identification of this consumption will allow us to reflect on new energy saving and efficient use strategies. In this research, we present a case study of the effects of the COVID-19 pandemic on electricity consumption in 13 state universities in Michoacán, Mexico. Electric energy consumption has been evaluated before and during the presence of the COVID-19 between 2019 and 2020. The comparative analysis estimated the reduction in energy consumption and its economic and environmental impact. The results show a considerable decrease in electricity consumption, generating an average saving of 76.24 MWh/month, which translates into an annual emission reduction from 2019 to 2020 of approximately 497 TnCO2e, and in economic terms of $8,882.25 USD each month. In general, it was ident... [more]

Small Island Developing States (SIDSs) are faced with challenges such as reducing the share of fossil energy and waste landfilling. This work summarizes the main aspects of 53 SIDSs that constrain economic development, energy sources, and waste management strategies. An integrative bibliographical review is conducted to synthesize the state-of-the-art of waste-to-energy (WtE) strategies and compare the technologies in light of their suitability to SIDS. The findings show that considering the large amount of waste produced annually, WtE technologies are of the utmost importance to reduce ecological footprints (EFs) and greenhouse gas (GHG) emissions, and to increase the share of renewable energy with the installation of incineration plants with energy recovery to replace fossil fuel power plants. Although WtE is recommended for all SIDSs, the Atlantic, Indian Ocean, Mediterranean, and South China Sea (AIMS) countries exhibit higher population density (1509 inhab/km2) and a high share of... [more]

Energy-saving and efficiency represent a crucial role in achieving a clean environment as well as economic and social development, providing substantial benefits to stakeholders, including householders. Better cost savings can be achieved by simply changing behavior. However, real energy users lack proper technical energy knowledge, awareness, and education in most cases. In most countries, women are involved in a higher percentage of energy activities in household chores but have less gender participation in energy decisions. In this regard, a gender perspective effectively understands energy users’ pragmatic and strategic needs for energy-saving behavior improvement. Previous literature reviews have been focusing on specific aspects of energy sustainability; however, no review has focused on energy-saving from a gender perspective to the best of our knowledge. It aims to provide a systematic review of literature on energy-saving and management, highlighting the importance of gender r... [more]

Current EU policy will force a significant reduction of hard coal mines in the near future due to environmental restrictions. There are also numerous non-coal underground mines that will be excavated in the next few years. Taking the above into consideration, it is worth starting to plan further steps in terms of reclamation of these facilities. Within this manuscript, both recently used and novel approaches to underground space reclamation have been reviewed. Selected methods of reclamation were analyzed in terms of their strengths and weaknesses, and the results were compared with the effect of a commonly used approaches (i.e., filling or flooding of underground space after mine termination). The analysis has been performed in the scope of sustainable development. Taking into account the opinion of many stakeholder groups and underground facilities, reuse was considered as an action aimed at fulfilling sustainable development goals and the circular economy concept. Based on numerous... [more]

Reducing the harmful effects on the environment and increasing the expression of sustainable development principles is one of the most topical challenges all around the world. Given the importance of logistics for the economy and the growing concern for the environment, the purpose of this article was to reveal a green logistics (GL) practice framework for sustainable development. Based on a systematic and comparative analysis of the scientific literature, the authors present a theoretical conceptual model for applying GL practices to sustainable development. In order to assess the expression of GL practices and their determinants in Lithuanian transport and logistics services companies, a quantitative questionnaire survey was conducted. Descriptive statistics, correlation, and regression analyses were used to analyze the data. The results made it possible to identify GL areas such as green transportation, green warehousing, green management, sustainable waste management, and the preva... [more]

The objective of the study was to demonstrate attitudes towards wind energy facilities in the area of the Korsze Commune. The results of the study were processed using structure indices calculated from the respondents’ answers, which were analyzed in terms of social and economic factors. The study revealed that both the NIMBY syndrome and the lack of civic engagement influence attitudes towards renewable energy technologies in rural areas. The NIMBY (“not in my backyard”) term describes negative public attitudes towards proposed development projects. However, some trends towards more pronounced attitudes can be observed, depending on socioeconomic conditions. The research results imply that the measures taken to promote renewable energy technologies should be designed differently depending on the socioeconomic situation of the targeted audience. Young people might be reached via social media appropriate to their age, and through campaigns promoting local investments. For older people,... [more]

The manufacturing industry is often caught in the sustainability dilemma between economic growth targets and climate action plans. In this study, a Log-Mean Divisia Index (LMDI) decomposition analysis is applied to investigate how the amount of industrial energy-related CO2 emissions in Latvia has changed in the period from 1995 to 2019. The change in aggregate energy-related CO2 emissions in manufacturing industries is measured by five different factors: the industrial activity effect, structural change effect, energy intensity effect, fuel mix effect, and emission intensity effect. The decomposition analysis results showed that while there has been significant improvement in energy efficiency and decarbonization measures in industry, in recent years, the impact of the improvements has been largely offset by increased industrial activity in energy-intensive sectors such as wood processing and non-metallic mineral production. The results show that energy efficiency measures in industry... [more]