The growing worldwide costs of energy produced as a result of conventional fuel combustion, the limited capacity of the distribution grid, and the growing number of unstable installations based on renewable energy sources increase the need to implement systems of stabilization and regulate loads for end users. The battery energy storage system (BESS) that operates in the internal microgrid of an enterprise enables the management of the accumulated energy in any time zone of the day. Using a price arbitrage strategy with an electricity storage facility, we can reduce the cost of high electricity prices during peak demand periods. This study aims to determine the most effective method of setting up the capacity and electrical power of an energy storage system operating in a microgrid, in an enterprise to implement a price arbitration strategy. Such a method should include consideration of the characteristics of the demand profile of consumer systems, the charges related to electricity, a... [more]

Refrigeration systems based on cooling towers and chillers are widely used equipment in industrial buildings, such as shopping centers, gas and oil refineries and power plants, among many others. Cooling towers are used to recover the heat rejected by the refrigeration system. In this work, the refrigeration is composed of cooling towers dotted with ventilators and compression chillers. The growing environmental concerns and the current scenario of scarce water and energy resources have lead to the adoption of actions to obtain the maximum energy efficiency in such refrigeration equipment. This backs up the application of computational intelligence to optimize the operating conditions of the involved equipment and cooling processes. In this context, we utilize multi-objective optimization algorithms to determine the optimal operational setpoints of the cooling system regarding the cooling towers, its fans and the included chillers. We use evolutionary multi-objective optimization to pr... [more]

Utilities are increasingly interested in integrating energy efficiency and demand response measures as a strategic approach that aims to achieve an increasingly reliable, dynamic, and integrated electric system. The concepts of energy efficiency (EE), demand response (DR), and system reliability (ESR) have been mainly studied from a different perspective, dealing only with the interaction between EE and DR and between EE and ESR. This paper aims to improve knowledge and demonstrate the validity of EE interventions (EEIs) through the use of a tool for evaluating the benefits of energy efficiency measures (EEMs) in the environmental sphere and in terms of DR and ESR. In order to evaluate this interaction, a quantitative method is proposed and validated on real results in an Italian case scenario, taking into account the analysis of smart meters data for residential users located in southern Italy in Calabria. Based on the collected data, an aggregation of users was evaluated with real ho... [more]

The rate of technological progress is an important metric used for predicting the energy consumption and greenhouse gas emissions of future light-duty fleets. A trade-off between efficiency and performance is essential due to its implications on fuel consumption and efficiency improvement. These values are not directly available in the Brazilian fleet. Hence, this is the main gap in knowledge that has to be overcome. Tendencies in all relevant parameters were also unknown, and we have traced them as well, established on several publications data and models. We estimate the three indicators mentioned above for the Brazilian fleet from 1990 to 2020. Although the rate of technological progress was lower in Brazil than that in developed countries, it has increased from 0.39% to 0.61% to 1.7% to 1.9% in subsequent decades. Performance improvements offset approximately 31% to 39% of these efficiency gains. Moreover, the vehicle market is shifting toward larger vehicles, thus offsetting some... [more]

Building models and their connected subsystems are often simulated as standalone entities. However, in order to monitor a system′s reactions to changing parameters and to assess its energy efficiency, it must be exposed to the actual dynamic context of the building under study. Hence, frameworks assessing co-operative simulation of buildings and their subsystems should be used. In this study, the Building Control Virtual Test Bed (BCVTB) framework was used for co-simulation of a small-scale building (EEBLab) connected to an Earth-to-air heat exchanger (EAHE). The EnergyPlus tool was used to simulate the indoor air temperature variations within the EEBLab, and MATLAB was used to model the EAHE system and to calculate its performance based on various parameters. The HOLSYS internet of things platform was deployed to monitor and collect the experimental data from the sensors to validate the simulations. A favorable agreement between the experimental and simulation results was obtained, sh... [more]

Buildings account for 40% of the European Union’s energy consumption. Deep energy renovation of residential buildings is key for decarbonization and energy poverty alleviation. However, renovation is occurring at far below the needed pace and depth. In this context, building renovation one-stop shops, which bring all project phases under one roof and provide advice, support, and finance to households, are highlighted as a promising solution. Nevertheless, this model is still absent or under-developed in most European countries and remains understudied in the scientific literature. Therefore, the present research goals are as follows: (i) to provide a critical review of emerging one-stop shop models; (ii) to streamline the deployment of building renovation digital one-stop shops by piloting a sequential multi-staged approach for Portuguese households and proposing it for replication elsewhere; and (iii) to compare case-study insights with other one-stop shops and discuss the notion in t... [more]

Manufacturing facilities use about 35% of the domestic energy in the United States every year. Implementing an effective energy management system (EnMS) is one of the most important approaches to improve energy efficiency. However, the implementation of EnMS is low for many countries (including the US) and even for energy-intensive sectors. The reasons for the low implementation rate of energy management systems had been investigated by multiple researchers, but very few studies have focused on the barriers and challenges of implementing ISO 50001-based energy management systems. To contribute to this understudied area, this paper discusses the implementation and outcomes of the first Better Plants 50001 Ready Virtual In-plant Training. This paper first provides an overview of 50001 Ready and the 50001 Ready Navigator Tool. Then, it provides details on this training event and its outcomes. Finally, it discusses findings from the responses to 40 live polling questions about the status o... [more]

The number of operations incorporating E-VTOL aircrafts is increasing each year, and the optimization of the energy consumption of such vehicles is a major problem. In this paper, a small-scale ARCHER helicopter’s energy consumption is analyzed, wherein different flight conditions, main rotor revolutions, and flight control system settings are considered. The helicopter dynamic model was developed in the FLIGHTLAB environment and was then validated based on flight test data. The model used for the calculation of energy consumption was developed using the electric and dynamic characteristics of the main rotor, electric motor, and transmission system. The main part of this work concerns the analysis of electric energy consumption during the vehicle’s flight via the use of an automatic flight control system (AFCS) that ensures repeatable flight conditions. The AFCS was designed such that it includes both path and attitude control to provide hover and cruise control modes. The helicopter’s... [more]

The World Energy Council has consistently formulated useful policies and ranked countries in term of their performances in environmental sustainability, energy equity, and energy security. In a novel approach, and possibly in one of the most unique studies in the World Energy Trilemma literature, the current study examines the interaction of energy efficiency and economic growth of several top-performing economies (Austria, Denmark, France, Finland, Germany, New Zealand, Sweden, Switzerland, and the United Kingdom) in respect to environmental sustainability, energy equity, and energy security. Importantly, while affirming the inappropriateness of the linear econometric approach, the study utilized the newly developed quantile-on-quantile approach to examine the dataset for the period 1990Q1 to 2018Q4. As such, the result largely indicates a significant and positive effect of economic growth toward the energy efficiency across the quantiles for the examined countries (Austria, Denmark,... [more]

The Fourth Industrial Revolution forms a smart grid with diverse sources of energy through the interconnectivity of data. Buildings that were previously the biggest users of energy are now becoming energy producers. Yet, buildings are also continually changing. The ecological definition of buildings, in addition to the building itself, includes solar panels and geothermal energy storage. The need for decarbonization and energy-efficiency brought about the implementation of heat pumps in buildings. The most economic type of heat pump is a water-sourced heat pump with hot and cold tanks or a connection to the District Energy System. Monitoring using building automatics allows HVAC optimization in the occupancy stage. Until the SARS-CoV-2 pandemic, the EU and the US differed in their air handling methodology, but the pandemic showed the limitations of both approaches and led to the creation of a new, integrated approach. These new ventilation systems, based on filtration instead of diluti... [more]

This study presents a new Model Predictive Controller (MPC), built with algorithms based on Paraconsistent Annotated Logic (PAL), with application examples in the excitation control of a synchronous generator. PAL is a non-classical evidential and propositional logic that is associated with a Hasse lattice, and which presents the property of accepting the contradiction in its foundations. In this research, the algorithm was constructed with a version of the PAL that works with two information signals in the degrees of evidence format and, therefore, is called Paraconsistent Annotated Logic with annotation of two values (PAL2v). For the validation of the algorithmic structure, the computational tool MATLAB® Release 2012b, The MathWorks, Inc., Natick, MA, United States was used. Simulations were performed which compared the results obtained with PPC-PAL2v to those obtained in essays with the AVR (Automatic Voltage Regulator) controls in conjunction with the PSS (Power System Stabilizer)... [more]

The energy crisis, an increasing concern of the industrial sector, is characterized by increased energy costs and low energy availability. As part of an effort to increase energy efficiency, the present study assessed the impact of applying lean tools on the energy consumption of a manufacturing organization. Using the Kaizen approach, the organization’s processes were analyzed to identify the main vulnerabilities and make the required changes to increase consumption performance. Several technical improvements were performed to reach increased energy efficiency. Results showed an energy efficiency increase; consumption was reduced by up to 7.5% in the production line, 3.5% in the extruder stage, and up to 20% for the injection stage of the manufacturing process. The results suggest that the organization’s energy reduction targets have been achieved. Standardization of procedures was useful in the development of Kaizen projects which could be applied with certain limitations. The implic... [more]

This study examines the energy intensity (EI), energy efficiency (EE), and economic growth, measured by the type of returns to scale (RTS), of 37 nations in the Organization for Economic Co-operation and Development (OECD) from 2000 to 2019. We apply a non-parametric approach to estimate the three measures from their consumption of four primary energy sources, such as coal, gas, oil, and zero emission (e.g., renewable and nuclear power) as inputs and gross domestic product (GDP) as an output. In this study, we have the two types of efficiency measures over time: window-based and cross-sectional-based measures. Three findings are identified from our empirical study. First, the operationally efficient group, including France, Iceland, Japan, Switzerland, UK, and USA, presented a stable status of full efficiency in the window-based efficiency measure. Iceland and Switzerland were also in the higher efficiency group based on the cross-sectional measure. Their efficiencies were high and sta... [more]

Solar energy utilization for covering and offsetting the heating loads of buildings, is a sustainable way to reduce energy consumption (electricity, gas, etc.) for space heating. As such, a Trombe wall technology is a classic passive solar heating system used in buildings, that can be modified and applied to cold climate regions. This work presents a case study on a Trombe wall’s application in relation to its thermal energy output for space heating purposes at a factory building in central Latvia. The solar radiation and temperature measurements were carried out throughout the months of June to October. The results show that the examined wall has a monthly energy yield of 120 to 290 kWh, suggesting that Trombe wall systems are applicable as a secondary space heating source in cold climate regions such as northern Europe, however, a number of design and structural aspects have to be thoroughly considered.

Pumping systems, especially those used in the water supply sector and in industrial and hydroelectric facilities, are commonly infested by the golden mussel. This causes an increase in maintenance operations (e.g., system shutdowns for cleaning) that can generate an increased energy cost. The geographical expansion of the golden mussel in Latin America presents an economic risk, not only to the ecosystem in general, but also to the energy sector. The imminence of its spread in the Amazon region, one of the main river basins in South America, is cause for concern with regard to the problems that bioinvasion of this species can cause. Given the absence of studies on the loss of energy efficiency in pumping systems impacted by the golden mussel, this study proposes a methodology to estimate the increase in energy consumption and costs of pumping under such bioinfestation. For the standardization of the methodology and development of mathematical calculations (both novel and improved equat... [more]

The need for healthy indoor conditions, the energy crisis, and environmental concerns make building ventilation systems very important today. The elements of ventilation systems to reduce energy intensity are constantly the subject of much scientific research. The most recent articles published in the last three years are analyzed in this paper. Publications focused on the topic of reducing energy consumption in ventilation systems were selected and divided into five key research areas: (1) the aspect of the airtightness of buildings and its importance for the energy consumption, (2) the methods and effects of implementing the concept of demand-controlled ventilation in buildings with different functions, (3) the possibilities of the technical application of decentralized ventilation systems, (4) the use of earth-to-air heat exchangers, (5) the efficiency of exchangers in exhaust air heat-recovery systems. The multitude of innovative technologies and rapid technological advances are re... [more]

This study was carried out to estimate the relevance of biological supplementation in improving the economic efficiency of anaerobic digestion (AD). Three kinds of silages—maize, grass, and igniscum—were initially inoculated with digestate and then supplemented with one of four vaccines containing different bacteria species (APD®, PPT®, JENOR®) or a yeast and mold mixture (HAP®). In addition, each plant silage was fermented without any additives (control A—maize silage, B—grass silage, and C—igniscum silage). The biodegradability process was performed in batch tests at a mesophilic temperature (38 °C). To compare the energetic efficiency of AD, the process kinetics, biogas, and methane production were analyzed. We found that the applied supplementation measures improved biogas production in the case of maize and igniscum (7−62% higher than controls), but decreased the yield of AD when grass silage was fermented (2−34% lower than controls). The greatest increase in methane production (b... [more]

The aim of this study was to assess the energy consumption of production in selected branches of the food industry in Poland and to identify its changes after Poland’s accession to the EU. This issue is particularly important in the period of energy transformation and soaring energy prices. The novelty of this article is the determination of changes in the energy efficiency of various branches of the food industry. The main source of data was mass statistics data and unpublished data from the Central Statistical Office for 2004−2020. Descriptive statistics, comparative analysis, and strategic group mapping were used in the data analysis. The research shows that the production of foodstuffs is one of the most energy-intensive processing sectors. This results, among others, from many active enterprises in this sector and a large variety of industries. Individual food-processing industries are characterized by large differences in the energy consumption of production, which determines the... [more]

This article investigates the impact of fiscal and financial incentives for energy efficiency labels on eco-friendly houses (houses with high energy efficiency certificates, such as A+, A, B, and B−) in 18 municipalities in the Lisbon metropolitan region during the period 2014−2020. The empirical results indicate that the variables of fiscal incentive policies for energy efficiency labels, income per capita, credit agreements for the purchase or construction of a house, and the number of completed dwellings in new constructions for family housing encourage eco-friendly houses. In contrast, the variable number of completed reconstructions per 100 completed new constructions has a negative impact. Although this study is constrained by data limitations resulting from the short period under analysis and the moderate number of municipalities available, it advances the discussions around energy efficiency in residential properties in Portugal. Furthermore, it investigates the effectiveness o... [more]

Bottom-up energy system models have been used extensively to analyse future energy scenarios, addressing a wide variety of policy questions. This paper focuses on energy efficiency, a key energy, climate, and economic policy area where several examples of energy system model applications can be found in the literature. This paper analyses how different studies implement energy efficiency scenarios in energy system models and explains how the approach taken can affect the results significantly, potentially affecting policy decisions. This analysis contributes to understanding how this type of modelling framework considers energy efficiency policy issues and the extent of insight provided, or not, on different dimensions. With the aim of identifying ‘best practice’ in using energy system models to inform effective analysis of energy efficiency policy, the UK TIMES energy system model is used to implement five different energy efficiency scenarios for residential heating following differe... [more]

The publication deals with the problem of the effect of interference with the movement of the “preceding” train on the movement of the “following” train in the case of efforts to reduce the distance between trains on a moving block interval. The paper presents results of the simulations for train of the ED250 type for a set of 135 traffic situations: for three contexts of reducing the speed of the “preceding” train, for five variants of the method of controlling the “following” train and for nine initial distances between these trains. The results confirmed the possibility of gaining time and energy benefits by implementing an appropriate method of controlling the “following” train, as well as providing insights into the area of shortening the gaps between trains, including the pursuit of synchronizing the speed of trains and possibly coupling them into a so-called virtual couples.

A new electrically driven gas booster is described as an alternative to the classical air-driven gas boosters known for their poor energetic efficiency. These boosters are used in small scale Hydrogen storage facilities and in refueling stations for Hydrogen vehicles. In such applications the overall energy count is of significance and must include the efficiency of the compression stage. The proposed system uses an electric motor instead of the pneumatic actuator and increases the total efficiency of the compression process. Two mechanical principles are studied for the transformation of the rotational motion of the motor to the linear displacement of the compressor pistons. The strongly fluctuating power of the compressor is smoothed by an active capacitive auxiliary storage device connected to the DC circuit of the power converter. The proposed system has been verified by numeric simulation, including the thermodynamic phenomena, the kinetics of the new compressor drive and the the... [more]

This paper addresses the energy efficiency issue in household appliances, which has led to the establishment of policies at a global level in favor of setting minimum energy performance standards (MEPS), which guarantee end users are able to select more efficient equipment. The countries of the United States, Brazil, Mexico, Chile, and the Community of the European Union were taken as references to review their policies and implementation strategies, in order to be compared with the Colombian panorama (at the market, technical and political levels). This allows the establishment of common aspects and differences related to the determination of energy consumption, adjusted volume, and formalization of efficiency ranges, and in the specific case of domestic refrigeration. Managing to distinguish the most relevant aspects for the successful adoption of these policies in Colombia. It is evident that the implementation of these guidelines has a positive impact on the market of the countries... [more]

This research presents an optimal scheme for the integration of renewable resources with the utility grid to minimize the operational cost of the residential and industrial microgrids. With the changing paradigm of solar photovoltaic in low-voltage distribution networks, utilities have allowed net metering and feed-in tariff (FiT). These incentives encourage residential and industrial consumers to contribute toward energy generation. However, in conventional mode, the system may underperform if resources are not scheduled optimally. To compensate for the price difference during off-peak and on-peak hours, the energy should be taken from the grid when electricity prices are lower and supplied to the grid when the electricity price is higher. The proposed models will therefore allow optimal resource utilization considering intermittent renewable generation as well as a time-varying utility tariff. A complete comparative analysis of on-grid and off-grid models was carried out. The results... [more]

Energy is vital for the proper functioning of the various sectors of the economy and social life. During the pandemic, there have been some changes in these aspects that need to be investigated. The main objective of this article is to identify the direction of change caused by the COVID-19 pandemic in energy consumption and energy intensity in sectors and economic areas in EU countries. The specific objectives are to identify the importance of energy consumption in sectors and areas of the economy in individual EU countries; to determine the dynamics of change and variability during the pandemic in energy consumption in individual sectors and areas of the economy in EU countries, especially during the COVID-19 pandemic; to determine the changes in energy intensity of individual economic sectors and the differences in energy intensity between individual EU countries, including during the COVID-19 pandemic. Using a purposive selection method, all 27 EU Member States were selected for th... [more]