Aerobic granules are small, dense aggregates of microbial cells that form naturally in aerobic wastewater treatment systems. They are characterized by their spherical shape, strong structural integrity, and ability to rapidly settle. These granules are formed through a self-immobilization process where different microbial species coalesce to degrade organic and inorganic compounds in wastewater. This study summarizes the development of aerobic granulation technology in wastewater treatment and the mechanism of aerobic granules’ formation, analyzes the characteristics and the factors affecting the aerobic granules’ formation, and presents practical engineering examples of its application from pilot-scale to full-scale operation.

Pyrolytic conversion is the only biomass exploitation route capable of providing solid and liquid biofuels, as well as platform biomolecules for sustainable energy sources and raw materials for bio-based products [...]

In the context of emissions, carbon dioxide constitutes a predominant portion of greenhouse gases (GHGs), leading to the use of the term “carbon” interchangeably with these gases in climate-related discussions. The carbon market has emerged as a pivotal mechanism for emission regulation, allowing industries that struggle to meet emission reduction targets to acquire credits from those who have successfully curbed their emissions below stipulated levels. Thermoeconomics serves as a tool for analyzing multiproduct systems prevalent in diverse sectors, including sugarcane and alcohol mills, paper and pulp industries, steel mills, and cogeneration plants. These systems necessitate frameworks for equitable cost/emission allocation. This study is motivated by the need to expand the scope of thermoeconomic modeling to encompass expenses or revenues linked with the carbon market. By utilizing a cogeneration system as a representative case, this research aims to demonstrate how such modeling ca... [more]

The growing interest in healthy lifestyles has contributed to an increased demand for nutrient-rich foods, such as plant-based proteins, vitamins, and minerals [...]

This paper presents a comprehensive study on the redesign of a dewatering process in a polymer sludge wastewater treatment plant. The study focuses on addressing the challenges posed by high levels of organic pollutants in the sludge, with the aim of enhancing dewaterability, reducing odors, and minimizing suspended solids. Initially, a vacuum belt filter was utilized, but it proved inadequate in removing sufficient water, resulting in substantial annual disposal costs. To address this issue, a filter press system was proposed, which significantly improved the dewatering process, producing a dryer cake with a solid content of 35%, compared to 19% achieved by the vacuum belt filter. Performance evaluation of the processes was conducted based on concentration of solids and capture efficiency, demonstrating the superiority of the filter press method. Furthermore, the filtrate obtained through the filter press met local discharge regulations, eliminating the need for additional treatment b... [more]

To address the issues of uneven sample lengths in the centrifuge machine bearings of the ternary precursor, inaccurate fault feature extraction, and insensitivity of important feature channels in rolling bearings, a rolling bearing fault diagnosis method based on adaptive sample length adjustment of one-dimensional convolutional neural network (1DCNN) and squeeze-and-excitation network (SeNet) is proposed. Firstly, by controlling the cumulative variance contribution rate in the principal component analysis algorithm, adaptive adjustment of sample length is achieved, reducing data with uneven sample lengths to the same dimensionality for various classes. Then, the 1DCNN extracts local features from bearing signals through one-dimensional convolution-pooling operations, while the SeNet network introduces a channel attention mechanism which can adaptively adjust the importance between different channels. Finally, the 1DCNN-SeNet model is compared with four classic models through experimen... [more]

Microwaves have the advantages of faster heating speed, shorter fixation time, and less pollution in tea fixation. However, there are few studies on the microwave fixation of mulberry leaf tea, which is not conducive to the promotion of mulberry leaf tea production. In order to study the fixation of mulberry leaf tea, the coaxial probe method is used to measure the dielectric constant of mulberry leaves, and the relationship connecting the real and imaginary parts of the dielectric constant and the moisture content is obtained through fitting. Based on this, a multiphysics model for mulberry leaf fixation in a six-port microwave cavity is established, which combines the characteristics of mulberry leaves, multiport heating, and mobile heating techniques. The impact of some important parameters, such as the layout and position of input ports and the thickness of mulberry leaves on the fixation process, are studied. The results show that the mutual energy coupling between ports can be re... [more]

Natural products are historically regarded as the main sources of bioactive compounds to fight the most diverse diseases; among them, propolis deserves to be highlighted due to several biological activities, such as antioxidant, anti-inflammatory, healing, antibacterial and antileishmanial activity. In this study, the antioxidant and antipromastigote activities and the cytotoxicity of propolis of the Scaptotrigona aff. postica stingless bee were evaluated. Propolis extract was analyzed by infrared spectroscopy, thermogravimetry and spectrophotometry for total polyphenols and flavonoid contents. Antioxidant activity was assessed spectrophotometrically by the DPPH, ABTS and FRAP methods, while antipromastigote activity and cytotoxicity were assessed by the MTT assay. The infrared spectra showed the characteristic bands of both phenols and alcohols. The thermogravimetry study revealed two events and thermal stability around 370 °C, while differential scanning calorimetry showed two endoth... [more]

When a sluice gate is arranged in parallel with pumping station units, biased flow occurs in the forebay when the units are operating. The transverse flow velocity in front of the channel inlet is relatively high, and, in severe cases, it may lead to the formation of suction vortices, impacting the stable operation of pump units. Taking the Liushan Pumping Station project of the Eastern Route of the South-to-North Water Diversion Project as a case study, this paper investigates the effect of the partition wall length on the inlet flow regime of pumping station units arranged in parallel with the sluice gate to reduce the transverse flow velocity in front of the channel inlet. Using numerical simulations, the inlet flow regimes for different partition wall lengths were compared. Moreover, the flow field distributions in the forebay under different operating conditions were analyzed alongside the transverse flow velocity in front of the channel inlet and the uniformity of flow velocity d... [more]

This study compared the efficiency of advanced supercritical CO2 extraction (SC-CO2) and conventional Soxhlet extraction (SE) in the isolation of lipophilic bioactive molecules (BAMs) from the oils of different sea buckthorn (SB) berries (Leikora and Ascola). A SB cake, a valuable by-product of oil extraction, was analyzed for phenolic compounds and antioxidant activity (AA). For this purpose, ultrasound-assisted extraction (UAE) with 70% (v/v) ethanol was optimized, and the following optimal UAE conditions were determined: ultrasonic power of 60%, temperature of 50 °C, and extraction time of 20 min. The individual BAMs in the oils and cake extracts were analyzed chromatographically, while the AAs were determined using the ORAC method. The oils extracted with SC-CO2 had a higher content of lipophilic BAMs and a higher AA value than the oils extracted with SE. Palmitic and palmitoleic acids, β-sitosterol, and α-tocopherol dominated the Leikora oil, while a higher content of oleic, linol... [more]

Aggregation and sharp reactivity decrease are the key problems of using nano zero-valent iron (nZVI) as a potential reaction medium for a permeable reactive barrier (PRB). In this study, nZVI particles encapsulated within an acrylonitrile−butadiene−styrene (ABS) matrix (nZVI/(ABS + EC)) was fabricated, which for the first time successfully simultaneously solved the above problems via accurately regulating the distribution of nZVI particles in the ABS matrix and regulating the contact between nZVI particles and the contaminated aqueous environment. In addition, the size and number of the pores throughout the ABS matrix were first regulated by ethyl cellulose (EC) for the purpose of controlling the contact between nZVI particles and the nitrate contaminant, affording apparent rate constants (kobs) for denitrification performance in the range of 0.0423 to 0.0820 min−1. The remediation of simulated nitrate-contaminated solution by nZVI/(ABS + EC) was suitably described by the first-order k... [more]

Accurately predicting the active power output of offshore wind power is of great significance for reducing the uncertainty in new power systems. By utilizing the spatiotemporal correlation characteristics among wind turbine unit outputs, this paper embeds the Diffusion Convolutional Neural Network (DCNN) into the Gated Recurrent Unit (GRU) for the feature extraction of spatiotemporal correlations in wind turbine unit outputs. It also combines graph structure learning to propose a sequence-to-sequence model for ultra-short-term power prediction in large offshore wind farms. Firstly, the electrical connection graph within the wind farm is used to preliminarily determine the reference adjacency matrix for the wind turbine units within the farm, injecting prior knowledge of the adjacency matrix into the model. Secondly, a convolutional neural network is utilized to convolve the historical curves of units within the farm along the time dimension, outputting a unit connection probability vec... [more]

The hydrodynamic characteristic of the multiphase mixed-transport pipeline is essential to guarantee safe and sustainable oil−gas transport when extracting offshore oil and gas resources. The gas−liquid two-phase transport phenomena lead to unstable flow, which significantly impacts pipeline deformation and can cause damage to the pipeline system. The formation mechanism of the mixed-transport pipeline slug flow faces significant challenges. This paper studies the formation mechanism of two-phase slug flows in mixed-transport pipelines with multiple inlet structures. A VOF-based gas−liquid slug flow mechanical model with multiple inlets is set up. With the volumetric force source term modifying strategy, the formation mechanism and flow patterns of slug flows are obtained. The research results show that the presented strategy and optimization design method can effectively simulate the formation and evolution trends of gas−liquid slug flows. Due to the convective shock process in the ei... [more]

The contaminant dyes that, even at low concentrations, may cause a series of adverse effects in humans and animals, and their removal by adsorption methods using alternative adsorbents as natural fibers, are regarded as a research topic that has become increasingly relevant. In this study, corn straw (CS), an agro-industrial residue, was used to remove dyes. The samples were characterized by ATR-FTIR, SEM-EDS, zeta potential, diffuse spectra, and colorimetry, before and after dye removal. The analyses allowed us to differentiate the morphology of CS after the treatment’s fiber on the adsorbent surface. The zeta potential showed a negative surface charge, but the acidic or alkaline treatment affected the surface charge of the sample, influencing the adsorption of cationic or anionic dyes. Adsorption data presented an increased removal when alkaline treatment was applied for the methylene blue (MB; qmax = 16.7 mg g−1), and the acid treatment was more effective for the Congo red (CR; qmax... [more]

Digital twins are an emerging technology that can be harnessed for the digitalization of the industry. Steel industry systems contain a large number of electro-hydraulic components as proportional valves. An input−output model for a water proportional cartridge valve was derived from physical modeling based on fluid mechanics, dynamics, and electrical principles. The valve is a two-stage valve with two two/two-way water proportional valves as the pilot stage and a marginally stable poppet-type cartridge valve as the main valve. To our knowledge, this is the first time that an input−output model was derived for a two-stage proportional cartridge valve with a marginally stable main valve. The orifice equation, which is based on Bernoulli principles, was approximated by a polynomial, which made the parameter estimation easier and modeling possible without measuring the pressure of the varying control volume, in contrast with previous studies of similar types of valves situated in the pilo... [more]

Hydrogen energy is an important carrier for energy terminals to achieve green and low-carbon transformation. Hydrogen, as a carbon-free fuel, has great research and development value in the field of thermal power generation. This article proposes a solution for the stable combustion of coal powder using Oxy-hydrogen Gas ignition technology. An Oxy-hydrogen Gas flame injection coal powder combustion testing device was constructed to experimentally study the temperature distribution in the combustion chamber under Oxy-hydrogen Gas ignition technology, with primary air coal powder concentrations of 0.27, 0.32, and 0.36 (kg coal powder/kg air), as well as the concentration changes of volatile CO emissions during the ignition of coal powder using both Oxy-hydrogen Gas and CH4 flames. The sensitivity of the NO generation during coal gasification combustion under the Oxy-hydrogen Gas ignition was simulated and analyzed. The results show that at a coal powder concentration of 0.32 (kg coal/kg... [more]

With the increasing scale of photovoltaic (PV) power stations, timely anomaly detection through analyzing the PV output power curve is crucial. However, overlooking the impact of external factors on the expected power output would lead to inaccurate identification of PV station anomalies. This study focuses on the discrepancy between measured and expected PV power generation values, using a dual classification system. The system leverages two-dimensional Gramian angular field (GAF) data and curve features extracted from one-dimensional time series, along with attention weights from a CNN network. This approach effectively classifies anomalies, including normal operation, aging pollution, and arc faults, achieving an overall classification accuracy of 95.83%.

This study aims to advance the recycling of mercury-containing waste and promote sustainable development within the polyvinyl chloride (PVC) industry. Our innovative system integrates pre-treatment technology (spraying potassium permanganate and demisting and dust removal) with efficient non-thermal plasma oxidation, resulting in excellent treatment efficiency, low cost, and simple operation. With a processing capacity of 3000 m3/h, the concentration of mercury emissions in flue gas can achieve the target of <0.01 mg/m3, boasting a removal efficiency exceeding 98%, which satisfies the standard “Emission standard of air pollutants for industrial kiln and furnace” (GB 9078-1996). Our results can provide technical support for the comprehensive purification of mercury-containing flue gas during the resource recovery process from mercury-containing waste. The application of our system can contribute to reducing mercury emissions in the PVC industry, lowering occupational exposure risks f... [more]

Flaxseed, also known as flax or linseed (Linum usitatissimum L.), is one of the oldest crops. It is used for oil and fiber production. The species displays a broad range of biological activities due to its chemical compounds. It has a widespread geographical distribution, and a large number of its varieties have been evaluated for their biological efficacy and nutritional value. This study investigates fifteen varieties of the species, some of which are examined for the first time. In this regard, a series of chemical composition analyses and antioxidant assays were carried out. Accordingly, total phenolic content ranged between 613.6 (Michael) and 3164.6 (Atalanta) mg GAE/g, whilst total flavonoid content varied from 176.25 (BonnyDoon) to 689.20 (Mcduff) mg QE/g. Regarding the radical scavenging assays, the values obtained were significantly higher than those of the standard antioxidant (ascorbic acid). Furthermore, the extracts exhibited chelating activity for ferrous ions and a cupr... [more]

Many researchers employed Poisson distribution-based control charts to monitor count data. Nevertheless, these charts can handle count data that deviate from the Poisson assumption of equal mean and variance. This paper suggests a new control chart (CC) that uses the generalized Conway−Maxwell−Poisson (GCOMP) distribution, which can deal with count data that have different levels of dispersion and zero-inflation (ZI). The proposed chart is designed considering the total number of counts. The main advantage of this study is that it pays attention to the tails of the count data when monitoring the process. The performance is measured by the average run length using L control limits at different sample sizes and parametric settings. The findings demonstrate that, for count data with varying tail behaviors, the proposed chart performs better compared to existing CCs. ZI count data can also be monitored with the proposed chart. The proposed chart can be applied in a variety of fields, as ve... [more]

The content of differentially abundant metabolites in the fermentation broth of grapefruit peels fermented by Cordyceps militaris at different fermentation times was analyzed via LC−MS/MS. Small molecule metabolites and differential metabolic pathways were analyzed via multivariate analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment. A total of 423 metabolites were identified at 0, 2, 6, and 10 days after fermentation. Among them, 169 metabolites showed differential abundance, with significant differences observed between the fermentation liquids of every two experimental groups, and the metabolite composition in the fermentation liquid changed over the fermentation time. In summary, the upregulation and downregulation of metabolites in cancer metabolic pathways collectively promote the remodeling of cancer cell metabolism, facilitating increased glycolysis, alterations in TCA cycle flux, and enhanced biosynthesis of the macromolecules required for rapid proliferatio... [more]

Butterfly valves are widely used in the pipeline transportation industry due to their safety and reliability, as well as their low manufacturing and operation costs. Cavitation is a common phenomenon in the butterfly valve that can lead to serious damage to a valve’s components. Therefore, it is important to investigate the generation and evolution of cavitation in butterfly valves. In this study, LES and the Zwart model were used as the turbulence and cavitation models, respectively, to simulate cavitation through a butterfly valve. The influence of the valve opening degree and inlet flow velocity on dynamic cavitation through the butterfly valve were studied. Furthermore, the cavitated flow field was examined, along with the performance coefficients of the butterfly valve. With the increase in the incoming flow velocity, the high-speed jet zone over a large-range and low-pressure zone appeared inside the downstream of butterfly valve, which affected its stability and the cavitation g... [more]

Lithium-ion batteries (LIBs) remain the cornerstone of EV technology due to their exceptional energy density. The selection of cathode materials is a decisive factor in LIB technology, profoundly influencing performance, energy density, and lifespan. Among these materials, nickel-rich NCM cathodes have gained significant attention due to their high specific capacity and cost-effectiveness, making them a preferred choice for EV energy storage. However, the transition from the laboratory-scale to industrial-scale production of NMC-811 cathode material presents challenges, particularly in optimizing the oxidation process of Ni2+ ions. This paper addresses the challenges of transitioning NMC-811 cathode material production from a lab scale to a pilot scale, with its high nickel content requiring specialized oxidation processes. The important point emphasized in this transition process is how to produce cathode materials on a pilot scale, but show results equivalent to the laboratory scale.... [more]

A machine is described as an assembly that has a drive system installed or is planned to have a drive system installed and that is constituted of linked elements or components, at least one of which moves, that are connected for a particular application (ISO12100). Different types of risks are present in machines, and exposure to them can cause harm or even death. When risk has been adequately reduced, machinery safety considers a machine’s ability to complete its intended duty throughout its life cycle. A literature review was carried out using “safety of machinery” as a keyword, which produced an analysis of 29 papers published from 2008 to 2024. The papers were examined through bibliometric analysis of the year of publication, country, citation statistics, and study of the keywords. These studies were classified into accident analysis papers, papers focused on the normative, papers that addressed risk assessment tools, and papers that conducted quantitative research. In addition, a... [more]

Micro−nanobubbles (MNBs) can generate ·OH in situ, which provides a new idea for the safe and efficient removal of pollutants in water supply systems. However, due to the difficulty in obtaining stable MNBs, the generation efficiency of ·OH is low, and the removal efficiency of pollutants cannot be guaranteed. This paper reviews the application research of MNB technology in water security from three aspects: the generation process of MNBs in water, the generation rule of ·OH during MNB collapse, and the control mechanisms of MNBs on pollutants and biofilms. We found that MNB generation methods are divided into chemical and mechanical (about 10 kinds) categories, and the instability of the bubble size restricts the application of MNB technology. The generation of ·OH by MNBs is affected by the pH, gas source, bubble size, temperature, and external stimulation. And the pH and external stimulus have more influence on ·OH generation in situ than the other factors. Adjusting the pH to alkal... [more]