Developments such as the increasing electrical energy demand, growth of renewable energy sources, cyber−physical security threats, increased penetration of electric vehicles (EVs), and unpredictable behavior of prosumers and EV users pose a range of challenges to the electric power system. To address these challenges, a decentralized system using blockchain technology and machine learning techniques for secure communication, distributed energy management and decentralized energy trading between prosumers is required. Blockchain enables secure distributed trust platforms, addresses optimization and reliability challenges, and allows P2P distributed energy exchange as well as flexibility services between customers. On the other hand, machine learning techniques enable intelligent smart grid operations by using prediction models and big data analysis. Motivated from these facts, in this review, we examine the potential of combining blockchain technology and machine learning techniques in... [more]

An earthquake early warning system (EEWS) should be included in smart cities to preserve human lives by providing a reliable and efficient disaster management system. This system can alter how different entities communicate with one another using an Internet of Things (IoT) network where observed data are handled based on machine learning (ML) technology. On one hand, IoT is employed in observing the different measures of EEWS entities. On the other hand, ML can be exploited to analyze these measures to reach the best action to be taken for disaster management and risk mitigation in smart cities. This paper provides a survey on the different aspects required for that EEWS. First, the IoT system is generally discussed to provide the role it can play for EEWS. Second, ML models are classified into linear and non-linear ones. Third, the evaluation metrics of ML models are addressed by focusing on seismology. Fourth, this paper exhibits a taxonomy that includes the emerging ML and IoT effo... [more]

In this paper, we present a detailed analysis of the possibility of using unsupervised machine learning techniques for reservoir interpretation based on the parameters obtained from geophysical measurements that are related to the elastic properties of rocks. Four different clustering algorithms were compared, including balanced iterative reducing and clustering using hierarchies, the Gaussian mixture model, k-means, and spectral clustering. Measurements with different vertical resolutions were used. The first set of input parameters was obtained from the walkaway VSP survey. The second one was acquired in the well using a full-wave sonic tool. Apart from the study of algorithms used for clustering, two data pre-processing paths were analyzed in the context of matching the vertical resolution of both methods. The validation of the final results was carried out using a lithological identification of the medium based on an analysis of the drill core. The measurements were performed in Si... [more]

The digital transformation of the energy sector toward the Smart Grid paradigm, intelligent energy management, and distributed energy integration poses new requirements for computer science. Issues related to the automation of power grid management, multidimensional analysis of data generated in Smart Grids, and optimization of decision-making processes require urgent solutions. The article aims to analyze the use of selected artificial intelligence (AI) algorithms to support the abovementioned issues. In particular, machine learning methods, metaheuristic algorithms, and intelligent fuzzy inference systems were analyzed. Examples of the analyzed algorithms were tested in crucial domains of the energy sector. The study analyzed cybersecurity, Smart Grid management, energy saving, power loss minimization, fault diagnosis, and renewable energy sources. For each domain of the energy sector, specific engineering problems were defined, for which the use of artificial intelligence algorithms... [more]

The protection of users of ICT networks, including smart grids, is a challenge whose importance is constantly growing. Internet of Things (IoT) or Internet of Energy (IoE) devices, as well as network resources, store more and more information about users. Large institutions use extensive security systems requiring large and expensive resources. For smart grid users, this becomes difficult. Efficient methods are needed to take advantage of limited sets of traffic features. In this paper, machine learning techniques to verify network events for recognition of Internet threats were analyzed, intentionally using a limited number of parameters. The authors considered three machine learning techniques: Long Short-Term Memory, Isolation Forest, and Support Vector Machine. The analysis is based on two datasets. In the paper, the data preparation process is also described. Eight series of results were collected and compared with other studies. The results showed significant differences between... [more]

Due to the advantages of high convergence accuracy, fast training speed, and good generalization performance, the extreme learning machine is widely used in model identification. However, a gas turbine is a complex nonlinear system, and its sampling data are often time-sensitive and have measurement noise. This article proposes an online sequential regularization extreme learning machine algorithm based on the forgetting factor (FOS_RELM) to improve gas turbine identification performance. The proposed FOS_RELM not only retains the advantages of the extreme learning machine algorithm but also enhances the learning effect by rapidly discarding obsolete data during the learning process and improves the anti-interference performance by using the regularization principle. A detailed performance comparison of the FOS_RELM with the extreme learning machine algorithm and regularized extreme learning machine algorithm is carried out in the model identification of a gas turbine. The results show... [more]

The building sector consumes as much as 80% of generated electricity in the UAE; during the COVID-19 pandemic, the energy consumption of two sub-sectors, i.e., commercial (50%) and residential (30%), was significantly impacted. The residential sector was impacted the most due to an increase in the average occupancy during the lockdown period. This increment continued even after the lockdown due to the fear of infection. The COVID-19 pandemic and its lockdown measures can be considered experimental setups, allowing for a better understanding of how users shift their consumption under new conditions. The emergency health measures and new social dynamics shaped the residential sector’s energy behavior and its increase in electricity consumption. This article presents and analyzes the identified issues concerning residential electricity consumers and how their behaviors change based on the electricity consumption data during the COVID-19 period. The Dubai Electricity and Water Authority co... [more]

Smart buildings are becoming a new standard in construction, which allows for many possibilities to introduce ergonomics and energy savings. These contain simple improvements, such as controlling lights and optimizing heating or air conditioning systems in the building, but also more complex ones, such as indoor movement tracking of building users. One of the necessary components is an indoor localization system, especially without any device worn by the person being located. These types of solutions are important in locating people inside smart buildings, managing hospitals of the future and other similar institutions. The article presents a prototype of an innovative energy-efficient device for radio tomography, in which the hardware and software layers of the solution are presented. The presented example consists of 32 radio sensors based on a Bluetooth 5 protocol controlled by a central unit. The preciseness of the system was verified both visually and quantitatively by the image r... [more]

Lignin depolymerization has been studied for decades to produce carbon-neutral chemicals/biofuels and biopolymers. Among different chemical reaction pathways, catalytic hydrogenolysis favors reactions under relatively mild conditions, while its yield of bio-oil and high-value aromatic products is relatively high. In this study, the influence of reaction parameters on lignin hydrogenolysis are discussed by chemical process parameter mapping and modeled using three different machine learning algorithms based upon literature experimental data. The best R2 scores for solid residue and aromatic yield were 0.92 and 0.88 for xgboost, respectively. The parameter importance was examined, and it was observed that lignin-to-solvent ratio and average pore size have a larger impact on lignin hydrogenolysis results. Finally, the optimal conditions of lignin hydrogenolysis were predicted by chemical process parameter mapping using the best-fit machine learning model, which indicates that further proc... [more]

Classification is one of the most common methods of supervised learning, which is divided into a process of data acquisition, data mining, feature analysis, machine learning algorithm selection, model learning and validation, as well as prediction of the result, which was done in the current work. The data that were analyzed concerned ionizing radiation signals generated by partial discharges, recorded by a method using the phenomenon of scintillation. It was decided to check if the data could be classified and if it was possible to determine the defect of an electrical power device. It was possible to find out which classifier (algorithm) worked best for the task, and that the data obtained can be classified, as well as that it is possible to determine the defect. In addition, it was possible to check what effect changing the default values of the classifier’s parameters has on the effectiveness of classification.

This research applies machine learning methods to build predictive models of Net Load Imbalance for the Resource Sufficiency Flexible Ramping Requirement in the Western Energy Imbalance Market. Several methods are used in this research, including Reconstructability Analysis, developed in the systems community, and more well-known methods such as Bayesian Networks, Support Vector Regression, and Neural Networks. The aims of the research are to identify predictive variables and obtain a new stand-alone model that improves prediction accuracy and reduces the INC (ability to increase generation) and DEC (ability to decrease generation) Resource Sufficiency Requirements for Western Energy Imbalance Market participants. This research accomplishes these aims. The models built in this paper identify wind forecast, sunrise/sunset and the hour of day as primary predictors of net load imbalance, among other variables, and show that the average size of the INC and DEC capacity requirements can be... [more]

An increase in consumption and inefficiency, fluctuating trends in demand and supply, and a lack of critical analytics for successful management are just some of the problems that the energy business throughout the world is currently facing. This study set out to assess the potential contributions that AI and ML technologies could make to the expansion of energy production in developing countries, where these issues are more pronounced because of the prevalence of numerous unauthorized connections to the electricity grid, where a large amount of energy is not being measured or paid for. This study primarily aims to address issues that arise due to frequent power outages and widespread lack of access to energy in a wide range of developing countries. Findings suggest that AI and ML have the potential to make major contributions to the fields of predictive turbine maintenance, energy consumption optimization, grid management, energy price prediction, and residential building energy deman... [more]

When drinking water flows into the water distribution network from a reservoir, it is exposed to the risk of accidental or deliberate contamination. Serious drinking water pollution events can endanger public health, bring about economic losses, and be detrimental to social stability. Therefore, it is obviously crucial to research the water contamination source identification problem, for which scholars have made considerable efforts and achieved many advances. This paper provides a comprehensive review of this problem. Firstly, some basic theoretical knowledge of the problem is introduced, including the water distribution network, sensor system, and simulation model. Then, this paper puts forward a new classification method to classify water contamination source identification methods into three categories according to the algorithms or methods used: solutions with traditional methods, heuristic methods, and machine learning methods. This paper focuses on the new approaches proposed i... [more]

Agricultural biomass is one of the most important renewable energy sources. As a byproduct of corn, soybean and sunflower production, large amounts of biomass are produced that can be used as an energy source through conversion. In order to assess the quality and the possibility of the use of biomass, its composition and calorific value must be determined. The use of nonlinear models allows for an easier estimation of the energy properties of biomass concerning certain input and output parameters. In this paper, RFR (Random Forest Regression) and SVM (Support Vector Machine) models were developed to determine their capabilities in estimating the HHV (higher heating value) of biomass based on input parameters of ultimate analysis. The developed models showed good performance in terms of HHV estimation, confirmed by the coefficient of determination for the RFR (R2 = 0.79) and SVM (R2 = 0.93) models. The developed models have shown promising results in accurately predicting the HHV of bio... [more]

Reservoir simulation is a time-consuming procedure that requires a deep understanding of complex fluid flow processes as well as the numerical solution of nonlinear partial differential equations. Machine learning algorithms have made significant progress in modeling flow problems in reservoir engineering. This study employs machine learning methods such as random forest, decision trees, gradient boosting regression, and artificial neural networks to forecast nanoparticle transport with the two-phase flow in porous media. Due to the shortage of data on nanoparticle transport in porous media, this work creates artificial datasets using a mathematical model. It predicts nanoparticle transport behavior using machine learning techniques, including gradient boosting regression, decision trees, random forests, and artificial neural networks. Utilizing the scikit-learn toolkit, strategies for data preprocessing, correlation, and feature importance are addressed. Furthermore, the GridSearchCV... [more]

In this paper, ensemble-based machine learning models with gradient boosting machine and random forest are proposed for predicting the power production from six different solar PV systems. The models are based on three year’s performance of a 1.2 MW grid-integrated solar photo-voltaic (PV) power plant. After cleaning the data for errors and outliers, the model features were chosen on the basis of principal component analysis. Accuracies of the developed models were tested and compared with the performance of models based on other supervised learning algorithms, such as k-nearest neighbour and support vector machines. Though the accuracies of the models varied with the type of PV systems, in general, the machine learned models developed under the study could perform well in predicting the power output from different solar PV technologies under varying working environments. For example, the average root mean square error of the models based on the gradient boosting machines, random fores... [more]

The requirements for new materials are increasing with each new application, which, in most cases, means an enhancement in the complexity of the development process. Nanoporous sol-gel-based materials, especially aerogels, are promising candidates for thermal superinsulation, electrodes for energy conversion and storage or high-end adsorbers. Their synthesis and processing route is complex, and the relationship between the material/processing parameters and the resulting structural and physical properties is not straightforward. Using small-angle X-ray scattering (SAXS) allows for fast structural characterization of both the gel and the resulting aerogel; combining these results with the respective physical properties of the aerogels and using these data as inputs for machine learning (ML) algorithms provide an approach to predict physical properties on the basis of a structural dataset. This data-driven strategy may be a feasible approach to speed up the development process. Thus, the... [more]

Nowadays, network attacks are the most crucial problem of modern society. All networks, from small to large, are vulnerable to network threats. An intrusion detection (ID) system is critical for mitigating and identifying malicious threats in networks. Currently, deep learning (DL) and machine learning (ML) are being applied in different domains, especially information security, for developing effective ID systems. These ID systems are capable of detecting malicious threats automatically and on time. However, malicious threats are occurring and changing continuously, so the network requires a very advanced security solution. Thus, creating an effective and smart ID system is a massive research problem. Various ID datasets are publicly available for ID research. Due to the complex nature of malicious attacks with a constantly changing attack detection mechanism, publicly existing ID datasets must be modified systematically on a regular basis. So, in this paper, a convolutional recurrent... [more]

Machine learning-based defect identification has emerged as a promising solution to improving the defect accuracy of the aero-engine blade. This solution adopts machine learning classifiers to classify the types of defects. These classifiers are trained to use features collected in ultrasonic echo signals. However, the current studies show the potential number of features, such as statistic values, for identifying defect reaches a number more than that offered by an ultrasonic echo signal. This necessitates multiple acquisitions of echo signal and increases manual effort, and the feature obtained from feature selection is sensitive to the characteristic of the classifier, which further increases the uncertainty of the classifier result. This paper proposes an ensemble learning technique that is only based on few features obtained from an echo signal and still achieves a high accuracy of defect identification as that in traditional machine learning, eliminating the need for multiple acq... [more]

The correlation between solid propellant grain configuration and burning surface area profile is a complicated nonlinear problem. Nonlinear optimization has been adopted to design grain configurations that satisfied the objective area profiles. However, as conventional design methods are impractical, with limited performance, it is necessary to investigate alternatives. Useful information for grain design can be obtained by analyzing the aforementioned correlation. However, this aspect has not been studied owing to the requirement of large amounts of data and analysis techniques. In this study, machine learning was used to develop a new design method. The objective of machine learning was to train a model to classify classes of data. The database stores various sets of configuration variables and their classes. The proposed Gaussian kernel-based support vector machine model predicts the class of newly designed grains. The results verified that the model accurately predicted the class o... [more]

Operating condition detection and fault diagnosis are very important for reliable operation of reciprocating compressors. Machine learning is one of the most powerful tools in this field. However, there are very few comprehensive reviews which summarize the current research of machine learning in monitoring reciprocating compressor operating condition and fault diagnosis. In this paper, the recent application of machine learning techniques in reciprocating compressor fault diagnosis is reviewed. The advantages and challenges in the detection process, based on three main monitoring parameters in practical applications, are discussed. Future research direction and development are proposed.

The high quality of Port wine is the result of a sequence of winemaking operations, such as harvesting, maceration, fermentation, extraction and aging. These stages require proper monitoring and control, in order to consistently achieve the desired wine properties. The present work focuses on the harvesting stage, where the sugar content of grapes plays a key role as one of the critical maturity parameters. Our approach makes use of hyperspectral imaging technology to rapidly extract information from wine grape berries; the collected spectra are fed to machine learning algorithms that produce estimates of the sugar level. A consistent predictive capability is important for establishing the harvest date, as well as to select the best grapes to produce specific high-quality wines. We compared four different machine learning methods (including deep learning), assessing their generalization capacity for different vintages and varieties not included in the training process. Ridge regression... [more]

Suppliers are adjusting from the order-to-order manufacturing production mode toward demand forecasting. In the meantime, customers have increased demand uncertainty due to their own considerations, such as end-product demand frustration, which leads to suppliers’ inaccurate demand forecasting and inventory wastes. Our research applies ARIMA and LSTM techniques to establish rolling forecast models, which greatly improve accuracy and efficiency of demand and inventory forecasting. The forecast models, developed through historical data, are evaluated and verified by the root mean squares and average absolute error percentages in the actual case application, i.e., the orders of IC trays for semiconductor production plants. The proposed ARIMA and LSTM are superior to the manufacturer’s empirical model prediction results, with LSTM exhibiting enhanced performance in terms of short-term forecasting. The inventory continued to decline significantly after two months of model implementation and... [more]

The fast exploration of a design space and identification of the best process conditions facilitating the highest space-time yield are of great interest for manufacturers. To obtain this information, depending on the design space, a large number of practical experiments must be performed, analyzed, and evaluated. To reduce this experimental effort and increase the process understanding, we evaluated a model-based design of experiments to rapidly identify the optimum process conditions in a design space maximizing space-time yield. From a small initial dataset, hybrid models were implemented and used as digital bioprocess twins, thus obtaining the recommended optimal experiment. In cases where these optimum conditions were not covered by existing data, the experiment was carried out and added to the initial data set, re-training the hybrid model. The procedure was repeated until the model gained certainty about the best process conditions, i.e., no new recommendations. To evaluate this... [more]

Early damage detection and classification by condition monitoring systems is crucial to enable predictive maintenance of manufacturing systems and industrial facilities. Data analysis can be improved by applying machine learning algorithms and fusion of data from heterogenous sensors. This paper presents an approach for a step-wise integration of classifications gained from vibration and acoustic emission sensors in order to combine the information from signals acquired in the low and high frequency ranges. A test rig comprising a drive train and bearings with small artificial damages is used for acquisition of experimental data. The results indicate that an improvement of damage classification can be obtained using the proposed algorithm of combining classifiers for vibrations and acoustic emissions.