We report the design, fabrication, and testing of a humidity sensor based on an optical fiber-based evanescent wave probe. The fiber was bent into a U-shape and de-cladded at the location of the bending. The de-cladded section was coated either with Au or with ZnO nanoparticles. Humidity is detected based on the interaction in the surface plasmon resonance of the Au/ZnO nanoparticles excited by an evanescent wave of light passing through the optical fiber. The response of the U-bent fibers to humidity was investigated using a specifically designed low-voltage portable interrogation box. We found that the fibers coated with ZnO nanoparticles were able to detect a minimum 0.1% change in humidity with an average sensitivity of 143 µV/%RH and 95% linearity over the 10% to 80% humidity range. In comparison, samples coated with Au and Au + ZnO nanoparticles demonstrated a minimum change detection of 0.3% RH and 2% RH respectively. The response and recovery time of the sensor were measured to... [more]

AF1410 is a low carbon high alloy ultra-high strength steel. It not only has high strength and high toughness, but also has a high stress corrosion resistance. However, due to the characteristics of hard quality and poor thermal conductivity, AF1410 is a difficult material to process. In the process of milling, the geometric factors of process parameters, the flexible deformation of milling cutter and the flutter of the process system all affect the surface roughness, which makes it difficult to predict the surface roughness of milling parts. In order to solve this problem, a prediction model for surface topography of ultrahigh strength steel AF1410 was studied. To solve this problem, this paper studies the formation of milling surface topography, considers the dynamic displacement of the milling system, proposes a modeling method of surface topography based on the dynamic characteristics of the milling system and forms a prediction model. On this basis, the surface topography of ultra... [more]

Furfural is one of the most important biomass platform compounds and can be used to prepare various high-value-added chemicals. The reactions of furfural with aliphatic alcohols via an oxidative esterification reaction or oxidative condensation reaction can bond two carbon molecules together and produce longer hydrocarbon chains chemicals, including methylfuroate and some low-volatility liquid biomass fuels. Thus, these reactions are considered significant utilization routes of furfural, and many inspiring catalytic systems have been designed to promoted these reactions. In this work, the reported catalytic systems for the oxidative esterification and oxidative condensation reactions are reviewed separately. The catalysts for the oxidative esterification reaction are reviewed for the classification of noble metal catalysts and non-noble metal catalysts, according to the active metals in the catalysts. For the oxidative condensation reactions, the studies using oxygen as the oxidant are... [more]

Parametric design, with its unique scientific and logical nature, is gradually applied in the field of landscape design. Therefore, the GIS (geographic information systems) technology of parametric software was applied to the optimization of traditional landscape architecture, and its practical application quality was discussed. The actual analysis results showed that the evaluation result of parametric design had the highest score of 7.71 in behavioral perception. The overall score was 7.28, showing a high scientific nature. In the evaluation of landscape environmental benefits, after the optimization of landscape greening by parametric design, the air cleanliness and living comfort were generally improved, compared with those before optimization, and the highest values were 11.97 ± 6.01 and 5.86 ± 2.11 respectively. In the evaluation of the economic benefits of gardens, the economic income of gardens in the past 8 years generally increased, reaching the highest of 3.5795 billion yuan... [more]

Anthracite in a specific area of Shanxi Province is the subject of this essay’s research. In the creep studies, different porosity intervals and pore water pressures were employed to evaluate the mechanical properties of creep under various test paths. The conventional Burges model was coupled in series with the nonlinear viscous elements and plastic elements. The key parameters in the equation are fitted, and a creep model is created to describe the nonlinear viscosity-elastic-plastic characteristics of coal under the influence of pore water pressure with varying porosities. The creep tests used varied porosity intervals, pore water pressures, and test paths to study the mechanical properties of creep. The conventional Burges model was coupled in series with the nonlinear viscous element and plastic element. To represent the nonlinear viscosity-elastic-plastic properties of coal under the effect of pore water pressure with variable porosities, the main parameters in the equation are f... [more]

The goal of this study was to evaluate the impact of simulating different fuel shapes for the material testing reactor (MTR). Two OpenMC codes were built, and the first OpenMC model was simulated using a curved shape fuel element to mimic the real dimensions and shape of the MTR. The code core parameters were validated with the collected parameters from the experimental work and two well-known Monte Carlo simulation codes (MCNP and SCALE). The validation process included the axial flux profile and criticality. After the OpenMC curve fuel model was validated, the MTR fuel was simulated as flat fuel elements with the exact amount of fuel as in the curve fuel model. By comparing the two OpenMC models’ calculations, it was observed that the radial flux distribution has only a slight difference due to fuel mass similarity. In conclusion, simulating the MTR fuel as flat elements provided a good agreement calculation compared to the real shape, but it was also observed that this might carry s... [more]

The purification of molten salts from admixtures as well as the effective control of admixture concentration has attracted researchers’ interests. In the present paper, the possibility of the electrochemical purification of PbCl2 from PbO and the effective control over the oxide ions concentration in molten PbCl2 is studied at the temperature of 520 °C. The PbCl2 melt with the initial addition of 0.5 wt% of PbO was used as a molten salt sample. The method of potentiostatic electrolysis was used to remove the oxide additions from the melt; the linear and square-wave voltammetry dependencies were recorded, and the melt samples were taken for analysis. Based both on the results of the electrochemical measurements and the analysis of oxygen concentration in the electrolyte, we built linear empirical dependencies of the anode peak current of the oxidation of oxygen-containing electroactive anions on the PbO concentration in the studied melt. We demonstrated that the obtained dependencies ma... [more]

Information and communication technology (ICT) companies strive for ceaseless innovation to remain competitive while facing the challenge of maximizing firm value (FV) with limited resources, and increasing the interests of shareholders. However, capital structures have a considerable effect on FV, and the literature still disagrees with the optimum structure in specific industries and countries. Therefore, this study evaluates the FV of ICT companies in terms of profitability efficiency using data envelopment analysis. In addition, this study applies a Tobit regression and Kruskal-Wallis one-way ANOVA to identify the impact of leverage, liquidity, and firm size, which are major capital structure factors influencing FV. The analysis yields three main results. First, in the ICT industry, small and medium companies tend to have better profitability efficiency than companies of other sizes. Second, only small and medium ICT manufacturing companies’ profitability efficiency is positively i... [more]

The P-S-N curve is a vital tool for dealing with fatigue life analysis, and its fitting under the condition of small samples is always concerned. In the view that the three parameters of the P-S-N curve equation can better describe the relationship between stress and fatigue life in the middle- and long-life range, this paper proposes an improved maximum likelihood method (IMLM). The backward statistical inference method (BSIM) recently proposed has been proven to be a good solution to the two-parameter P-S-N curve fitting problem under the condition of small samples. Because of the addition of an unknown parameter, the problem exists in the search for the optimal solution to the three-parameter P-S-N curve fitting. Considering that the maximum likelihood estimation is a commonly used P-S-N curve fitting method, and the rationality of its search for the optimal solution is better than that of BSIM, a new method combining BSIM and the maximum likelihood estimation is proposed. In additi... [more]

Fungi of the Monascus species are used in Asia for the production of fermented foods, mainly due to the ability of these fungi to produce secondary metabolites such as pigments. Due to the growing discussion about the use of synthetic dyes and the fact that their ingestion is associated with harm to human health, studies have sought to replace these dyes using natural pigments, and new alternatives for the production of these natural pigments have been presented. In this context, Monascus pigments are a viable alternative for application in the food industry. This study aimed to evaluate different main carbon sources and pH conditions in the red pigment production of Monascus sp. We found that mannitol, when used as the only carbon source, stimulated the production of extracellular red pigment, reaching a concentration of 8.36 AU in 48 h, while glucose and sucrose reached concentrations of 1.08 and 1.34 AU, respectively. Cultivation in a bioreactor using mannitol showed great potential... [more]

Very high viscosity significantly impacts the mobility of heavy crude oil representing difficulties in production and a decrease in the well’s efficiency. Downhole electric heating delivers a uniform injection of heat to the fluid and reservoir, resulting in a substantial decrease in dynamic viscosity due to its exponential relationship with temperature and a drop in frictional losses between the production zone and the pump intake. Therefore, this study predicts temperature and viscosity profiles in heavy oil-production wells implementing a downhole induction heater employing a simplified CFD model. For the development of the research, the geometry model was generated in CAD software based on the geometry provided by the BCPGroup and simulated in specialized CFD software. The model confirmed a 46.1% effective decrease of mean 12° API heavy-oil dynamic viscosity compared with simulation results without heating. The developed model was validated with experimental data provided by the BC... [more]

Currently, the integration method of silicon PIN radiation detectors faces challenges such as complex processes, poor reliability and thick dead layers. Novel integration methods based on metal bonding technology for realizing the integration of thick and thin PIN detectors are needed with the requirement of reducing signal crosstalk, package volume and weight. Combined with the current research on metal bonding technology, this paper presents an extensive review of metal bonding technology, especially metal Al bonding technology, to provide a certain reference to future research on the bonding processing of high-performance silicon PIN detector devices.

In the context of sustainability, viticulture will address issues related to soil fertility in the coming period. Greater attention will therefore be paid to replacing traditional manure-based fertilisers, such as farmyard manure, with new types of fertiliser in the form of composts, digestate, etc. Experience to date suggests that good-quality composts are not only a source of nutrients that the vines take from the soil each year, but also a source of organic matter. The application of compost and its subsequent decomposition in the soil profile can have a positive effect on the growth of the roots and above-ground parts of the vine. However, optimising the effects and action of compost is linked to determining the necessary doses and methods of application. The aim of this three-year study was to provide an overview of the results aimed at evaluating the effects of the application of compost (CO) and compost enriched with the addition of lignohumate (CO+L20), at a rate of 30 t·ha−1,... [more]

Fossil fuel price increases, their uneven distribution, environmental issues from their incineration, and lack of guarantees of their energy security are the main drivers for the development of green energy. Agricultural waste is an abundant resource for energy bioprocessing, which improves the functioning of the circular economy. In this study, the following were used as the main indicators: the share of renewable energy and the benefit from it, the coefficient of cyclical use of biomass, and the reduction in carbon dioxide emissions. The ways in which sunflower waste is applied for energy purposes are emphasized. The highest comprehensive ecological and economic effects are shown to be achieved in the production of biogas from sunflower residues with the incineration of this biogas in cogeneration plants. The residues from the biogas plant that are left after fermentation should be used as a biofertilizer. Such a cyclic system allows not only the full processing of all biomass waste... [more]

Greenhouse gases, the main cause of global warming, are generated largely in the energy sector. As the need for technology that has reduced greenhouse gas emissions while producing energy is on an increase, CCU technology, which uses CO2 to produce CH4 (SNG energy, synthetic natural gas), is drawing attention. Thus, the reaction for converting CO2 to CH4 at a specific temperature using a catalyst is CO2 methanation. The field of CO2 methanation has been actively studied, and many studies have been conducted to enhance the activity of the catalysts. However, there is a lack of research on the variables that may appear when CO2 methanation is attempted using emissions containing CO2 generated from industrial fields and bio-plants. According to previous studies, it is reported that realistic feed gases from gasification or biomass plants contain a significant amount of CO. this study is a follow-up study focused on the application of CO2 methanation in various real processes. In the CO2 m... [more]

This study presents a novel hybrid framework combining feature selection, oversampling, and machine learning (ML) to improve the prediction performance of vehicle insurance. The framework addresses the class imbalance problem in binary classification tasks by employing principal component analysis for feature selection, the synthetic minority oversampling technique for oversampling, and the random forest ML classifier for prediction. The results demonstrate that the proposed hybrid framework outperforms the conventional approach and achieves better accuracy. The purpose of this study is to provide insurance managers and practitioners with novel insights into how to improve prediction accuracy and decrease financial risks for the insurance industry.

The development of the Mahu tight reservoir has adopted horizontal wells with staged fracturing. In the fracturing, there is a problem of a high fracturing pressure. Acid treatment is often used to lower the fracturing pressure on site. At present, the impact of this acid treatment on the physical parameters of the rocks of the reservoir in the Mahu region has not been systematically studied. Aiming to solve this problem, this paper conducted an experimental study on how acid dissolution affects the physical properties of the Mahu conglomerate, including its porosity, permeability, triaxial rock mechanical parameters, tensile strength, and mineral composition. First, the experimental scheme was designed. Next, a series of experiments were conducted. Finally, the experiment results were analyzed comparatively before and after acidizing. The acid composition, concentration, and contact time were the main factors for the analysis, based on which the acid system and related parameters were... [more]

Alongside volcanic eruptions in the middle and late Permian, the sedimentary environment and process changed, and the lithofacies characteristics varied conspicuously in the marine deposits of the Sichuan Basin (China). The tuffaceous rocks, as a new type of unconventional reservoir, provide strong evidence for marine and volcanic influences on the lithology and reservoir potential of the rocks. With experimental studies relying on field outcrops, thin sections, scanning electron microscopy and whole-rock X-ray diffraction (XRD), the researchers analyzed the lithofacies characteristics, pore types and controlling factors on the various types of pores in the tuffaceous rocks. We identified three lithofacies types in this new type of Permian reservoir in the Sichuan Basin, namely tuff, sedimentary tuff, and tuffaceous mudstone. The mineral composition of the three lithofacies includes quartz, feldspar, carbonate minerals, pyrite, and clay, among which feldspar is mainly potassium feldspa... [more]

The purpose of the software development presented in the article is to obtain detailed information about the surface of the walls in wells necessary for more efficient and safe drilling and casing of the wellbore. The developed software of the automated system “LogPWin” allows obtaining a clear idea of the mine itself, as well as reducing the time spent on processing and analyzing the model obtained during the logging process. A software product developed as a result of the work provides visualization of data coming from an acoustic profiler, giving a visual and informative idea of the object of study. The program gives detailed information about the surface of the mine’s walls through 3D modeling. It possesses the possibility of rotating and scaling the object; there is also a color palette that can be changed depending on the incoming data. The program can be applied in the oil and gas industry and mining, as well as when drilling wells for other purposes. The program interface is qu... [more]

After the severe industrial pollution from World War II, the Setouchi Sea areas and its islands (the Triennale hosting areas) experienced severe economic and population shrinkage. The target of SDG 8.9 is to promote “direct tourism GDP” and “tourism-related jobs” by devising and implementing policies (e.g., some Triennale and Biennale) for sustainable tourism. Triennale-driven tourism is an essential component of sustainable tourism and city revitalization, lasting almost 20 years in Japan. The current paper attempts an empirical analysis into the positive impacts of exhibition-driven sustainable tourism for SDG 8.9 in these rural islands (from pollution to green and low-carbon islands revitalization). The panel data of “pollution load of living environment items” by cities in Japan and “tourists, income, and population” from 14 areas in Kagawa were monitored using multiple methods, such as descriptive and inferential statistics (the one-way ANOVA test and Simple Linear Regression (SLR... [more]

Upper respiratory infections (URI) are the most frequent illnesses, especially in children. The majority of those infections are prescribed broad-spectrum antibiotics, which are associated with various side effects and with the increase in multi-drug-resistant strains. A promising alternative approach is the administration of the probiotic strain Streptococcus salivarius K12 (SSK12) that colonizes the upper respiratory tract (URT) and produces the salivaricins A2 and B, which strongly antagonize the growth of key respiratory pathogens. However, since for food supplements no quality controls of the active probiotic ingredient are mandatory, the efficacy of commercial products containing SSK12 may vary. This study aimed to investigate the in vitro efficacy of several commercial SSK12-containing probiotics, positioned for the prevention of respiratory infections. The parameters evaluated to determine the in vitro efficacy included the viability of the probiotic bacterial strain and the mi... [more]

In this study, we employ the novel method of quantile mediation analysis to explore dynamic relationships among hydropower energy consumption, economic growth, and carbon dioxide emissions in Taiwan during the period between 1990 and 2020. The empirical results show that hydropower energy consumption only has a direct effect on reducing carbon dioxide emissions at a 0.2 distribution of carbon dioxide emissions. Moreover, results indicate that economic growth does not have a mediating effect between hydropower energy consumption and carbon dioxide emissions at any distribution of carbon dioxide emissions. Lastly, evidence produced by this study supports the existence of an environmental Kuznets curve in the context of Taiwan.

For nearly three decades, zero-valent iron (ZVI) has been used in wastewater treatment and groundwater and soil remediation. ZVI can degrade contaminants by reactions of adsorption, redox, and co-precipitation. It can also react with oxidants like hydrogen peroxide, persulfate, and ozone to produce highly reactive radicals that can rapidly remove and even mineralize organic contaminants. However, the application of ZVI is also limited by factors such as the narrow pH range and surface passivation. The addition of chelating agents such as nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA), or citrate to the ZVI-based processes has been identified to greatly increase the iron stability and improve the efficiency of contaminant degradation. From the perspective of commonly used organic and inorganic chelating agents in ZVI applications, the review addresses the current status of ligand-enhanced ZVI degradation of organic contaminants, illustrates the possible reaction mec... [more]

In this study, the electronic structure of the galena surface was investigated using the first-principle calculation. The results of band structure, density of states, Mulliken population distribution, and frontier orbital analysis showed that galena was the p-type semiconductor of the direct band gap. During the formation of galena crystals, the 3p orbital of the S and the 6p orbital of the Pb played a primary role. Additionally, S atoms in galena quickly lose electrons and are oxidized, while Pb readily reacts with anions. The results of surface structure and electronic properties, such as surface relaxation, surface state energy levels, electronic density of states, and atomic charge distribution showed that the electronics in the 6p orbital of the Pb are transferred to the 3p orbital of the S in galena crystal. They caused the change of atomic valence states in lattice surfaces. The total electron number of the outermost surface layer was also higher than the bulk, giving the galen... [more]

Traditional microchannel needs to face the flow-reversal difficulty in high heat fluxes due to limited space. It results in large pressure and temperature fluctuation. Porous microchannels arouse more interest to provide a new solution to this problem. Flow boiling experiments in porous microchannels with PFA were investigated. Porous microchannels were sintered by 10 μm (or 30 μm) spherical copper particles with pore-forming agent (Na2CO3, 60−90 μm). Porous microchannels were composed of 23 parallel porous microchannels with 600 μm in width and 1200 μm in depth.The addition of PFA (pore-forming agent) could increase the sample porosity. For Q10 series, sample porosities increase from 20.4% to 52.9% with the PFA percentage change from 0% to 40%, while for the Q30 series they increase from 26.6% to 47.5%. Experimental results showed the boiling heat transfer coefficient (HTC) reached the maximum at the moderate porosity for both Q10 and Q30 series. Too large or too small porosity would... [more]