Abstract
The physical and mechanical properties of the materials in the swirling fluidized-bed seed pelleting unit affect the mixing degree of the materials in the pelleting and coating process, which is of great significance to research on pelleting and coating. The problem of discrete particle model parameters affecting CFD-DEM simulation results is addressed. In this paper, red clover seeds (referred to as seeds) and pelletized coating powder (referred to as powder) were used as the research objects, and the JKR. model was selected to calibrate the contact parameters between seeds and powder based on particle amplification theory. With the powder rest angle as the response value, a simulation calibration test was conducted; the parameters with significant effects on the response value were screened based on the Plackett−Burman test, and the steepest climb test determined the range of factor levels of essential parameters. The Box−Behnken test was used to establish the curvilinear response surface and quadratic regression equation to determine the best combination of simulation parameters for the powder. The discrete element rest angle was conducted with the best combination of parameters. The error of the test compared with the physical examination was 1%. The particles calibrated by simulation were subjected to the pneumatic suspension velocity test and particle mixing test. The test results matched the physical test results, which further verified the accuracy and applicability of the established discrete element model and parameters for coated powders.