Abstract
The aim of this study was to investigate and analyze the separation process of poly (ethylene terephthalate) and high-density polyethylene mixture. The research studied the influence of parameters of tribocharging and separation processes on the quality of separation. The research was carried out using a developed test stand consisting of a test tribocharger and a dedicated drum-type electrostatic separator. Both the separator and the tribocharger have been designed as automated test benches to assess the quality of plastic separation. In order to assess the quality of electrostatic separation of plastics, an original method based on the use of a dedicated vision system was used. The research was conducted in two stages. Firstly, the influence of the tribocharging process parameters on the efficiency of the process, i.e., the charge collected, was investigated. The next stage of the research was focused on the analysis of the influence of the separation process parameters on its effectiveness. The obtained results were presented and discussed. On the basis of the conducted research, the parameters of the tribocharging and separation processes affecting their effectiveness were determined.