In order to study the lean combustion process of a natural gas engine by separating the combustor, a spark ignition natural gas engine with separated combustors was retrofitted from a S195 single-cylinder diesel engine. Methods: The electronic control system controlled the gas supply and the spark plug ignition. A low pressure injection valve was set in the inlet pipe to form a lean mixture while a high pressure injection valve was placed in the subsidiary chamber to create a rich mixture, which was then ignited and injected into the main combustor, where the lean mixture was subsequently ignited again to achieve stratified combustion. Results: The test results showed that steady ignition is feasible in the system and verified the impact of the shape of the main combustor on HC, the impact of channel diameter on NOX production, and the impact of the ratios of high-pressure gas and low-pressure gas on HC and NOX. The combustion conditions of high-pressure gas and low-pressure gas in the engine combustor vary greatly. Our results signify that the shape of the main combustor has a great impact on the performance of the engine, that is, a shorter propagation distance can reduce the generation of HC. Conclusion: The best ignition advance angle under different conditions was determined using a spark ignition natural gas engine. The ratios of high-pressure gas and low-pressure gas greatly impact the performance and emission of the engine. The reduced diameter of the channels between the main and subsidiary combustors can enhance the stratification and facilitate the secondary ignition.