Tight-sandstone oil and gas resources are the key areas of unconventional oil and gas resources exploration and development. Because tight-sandstone reservoirs usually have the characteristics of a low porosity and ultralow permeability, large-scale hydraulic fracturing is often required to form artificial fractures with a high conductivity to achieve efficient development. The brittleness of rock is the key mechanical factor for whether fracturing can form a complex fracture network. Previous scholars have carried out a lot of research on the brittleness characteristics of conglomerate and shale reservoirs, but there are few studies on the brittleness characteristics of sandstone with different types and different coring angles in tight-sandstone reservoirs and the fracture propagation law of sandstone with different brittleness characteristics. Based on this, this paper carried out a systematic triaxial compression and hydraulic fracturing experiment on the tight sandstone of Shan 1 and He 8 in the Longdong area of the Changqing oilfield. Combined with CT scanning cracks, the brittleness characteristics and fracturing crack propagation law of different types and different coring angles of sandstone under formation-confining pressure were clarified. The results show that there are great differences between different types of sandstone in the yield stage and the failure stage. The sandstone with a quartz content of 100% has the highest peak strength and a strong brittleness. Sandstones with a high content of natural fractures and dolomite have a lower peak strength and a weaker brittleness. There are also differences in the peak strength and fracture morphology of sandstone with different coring angles due to geological heterogeneity. The sandstone with a comprehensive brittleness index of 70.30 produces a more complex fracture network during triaxial compression and hydraulic fracturing than the sandstone with a comprehensive brittleness index of 14.15. The research results have important guiding significance for on-site fracturing construction of tight-sandstone reservoirs.