Abstract
The trend towards the decentralization and decarbonization of the energy sector stimulates the adoption of generation facilities based on renewable energy sources (RES) and distributed generation (DG) facilities that utilize secondary energy resources. Operation features of DG facilities, such as a high speed of electromechanical transient processes and significant deviations of power quality indicators from standard values, require improvement and an increase in the speed of automation devices. Modern electroautomatic devices must determine the operating regions (normal and emergency) and adapt the operation algorithms to the conditions of the current mode. The study presented proposes methods developed to use the Wald Sequential Probability Ratio Test (WSPRT) to improve the reliability and efficiency of the power system automation devices. The paper provides examples of using WSPRT in the devices of automatic frequency load shedding, automatic transformer disconnection, and power quality control. The results of mathematical modeling confirm the high performance of WSPRT in power system automation devices owing to an increase in the reliability of operating regions identification and speed of response. For example, in the automatic frequency load shedding (AFLS) algorithm for a network with DG facilities at a sampling rate that meets the requirements of the IEC 61850 (80 samples per period), the acceptance time does not exceed 1 ms. The study substantiates the need to use WSPRT in the logic blocks of automation devices employed in active distribution networks.