LAPSE:2023.5954
Published Article

LAPSE:2023.5954
A Food-Grade Resin with LDH−Salicylate to Extend Mozzarella Cheese Shelf Life
February 23, 2023
Abstract
Mozzarella cheese can be considered by far the world’s most popular Italian dairy product. Extending the shelf life of mozzarella cheese is an important issue in the dairy industry due to the high risk of contamination by several bacteria species, including spoilage pseudomonads. In this work, active packaging was prepared by coating traditional polyethylene terephthalate (PET) containers of “ovoline” mozzarella cheese with a food-grade resin mixed with a layered double hydroxide (LDH) in which salicylate anion was intercalatedby ionic exchange.. This antimicrobial molecule is listed in EC-Directive 10/2011/EC of 14 January 2011. Morphological arrangement of the molecule into the LDH layers was evaluated by X-ray diffraction (XRD) and controlled release followed by UV spectroscopy. Then, active trays were used to pack the mozzarella cheeses stored for 20 days at 4 °C and under thermal abuse (15 °C). Samples from both conditions showed coliform reduction (by ca. 2 log CFU/g) throughout the storage period. Depending on temperature, total mesophilic aerobic bacteria, Pseudomonas spp., yeasts, and mold loads were reduced in the first 3 days; at 4 °C. Slower acidification and lower proteolysis were also found in treated samples in comparison to control ones. The fitting of the Gompertz function to coliforms and spoilage pseudomonads highlighted an increase in the shelf life of mozzarella cheese of ca. 2 days at 4 °C. These results suggest that salicylate−LDH-coated PET may be applied to extend the shelf-life of mozzarella cheese and also counteract its spoilage if accidental interruptions to refrigeration occur.
Mozzarella cheese can be considered by far the world’s most popular Italian dairy product. Extending the shelf life of mozzarella cheese is an important issue in the dairy industry due to the high risk of contamination by several bacteria species, including spoilage pseudomonads. In this work, active packaging was prepared by coating traditional polyethylene terephthalate (PET) containers of “ovoline” mozzarella cheese with a food-grade resin mixed with a layered double hydroxide (LDH) in which salicylate anion was intercalatedby ionic exchange.. This antimicrobial molecule is listed in EC-Directive 10/2011/EC of 14 January 2011. Morphological arrangement of the molecule into the LDH layers was evaluated by X-ray diffraction (XRD) and controlled release followed by UV spectroscopy. Then, active trays were used to pack the mozzarella cheeses stored for 20 days at 4 °C and under thermal abuse (15 °C). Samples from both conditions showed coliform reduction (by ca. 2 log CFU/g) throughout the storage period. Depending on temperature, total mesophilic aerobic bacteria, Pseudomonas spp., yeasts, and mold loads were reduced in the first 3 days; at 4 °C. Slower acidification and lower proteolysis were also found in treated samples in comparison to control ones. The fitting of the Gompertz function to coliforms and spoilage pseudomonads highlighted an increase in the shelf life of mozzarella cheese of ca. 2 days at 4 °C. These results suggest that salicylate−LDH-coated PET may be applied to extend the shelf-life of mozzarella cheese and also counteract its spoilage if accidental interruptions to refrigeration occur.
Record ID
Keywords
active coating, coliforms, layered double hydroxides, PET, Pseudomonas spp., salicylate
Suggested Citation
Quintieri L, Bugatti V, Caputo L, Vertuccio L, Gorrasi G. A Food-Grade Resin with LDH−Salicylate to Extend Mozzarella Cheese Shelf Life. (2023). LAPSE:2023.5954
Author Affiliations
Quintieri L: Institute of Sciences of Food Production, National Research Council of Italy, Via G. Amendola 122/O, 70126 Bari, Italy [ORCID]
Bugatti V: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy; Nice Filler s.r.l., Via Loggia dei Pisani, 25, 80133 Napoli, Italy
Caputo L: Institute of Sciences of Food Production, National Research Council of Italy, Via G. Amendola 122/O, 70126 Bari, Italy [ORCID]
Vertuccio L: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy
Gorrasi G: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy [ORCID]
Bugatti V: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy; Nice Filler s.r.l., Via Loggia dei Pisani, 25, 80133 Napoli, Italy
Caputo L: Institute of Sciences of Food Production, National Research Council of Italy, Via G. Amendola 122/O, 70126 Bari, Italy [ORCID]
Vertuccio L: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy
Gorrasi G: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy [ORCID]
Journal Name
Processes
Volume
9
Issue
5
First Page
884
Year
2021
Publication Date
2021-05-18
ISSN
2227-9717
Version Comments
Original Submission
Other Meta
PII: pr9050884, Publication Type: Journal Article
Record Map
Published Article

LAPSE:2023.5954
This Record
External Link

https://doi.org/10.3390/pr9050884
Publisher Version
Download
Meta
Record Statistics
Record Views
367
Version History
[v1] (Original Submission)
Feb 23, 2023
Verified by curator on
Feb 23, 2023
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2023.5954
Record Owner
Auto Uploader for LAPSE
Links to Related Works
(0.07 seconds)
[0.07 s]
