Abstract
To produce a valuable final product from anaerobic digestion (AD), one of the preferred methods of organic recycling, high quality feedstock must be ensured. In this study, separately collected real biowaste (B) was used, consisting of 90% food waste and 10% green waste. The priority issues of AD are both high methane production (MP) and high organics removal efficiency (as organic matter, OM and dissolved organics, and DCOD), which may be improved after pre-treatment. In this study, the effect of hydrothermal pre-treatment (BHT) and enzymatic additives (BE) on MP and organics removal from biowaste in mesophilic (37 °C) conditions was analyzed. To assess the adequacy of pre-treatment application, biowaste without treatment (BWT) was used. Pre-treatment of biowaste prior to AD affected the maximal MP, the removal effectiveness of both OM and DCOD, and the kinetic parameters of these processes. For BWT, the maximal cumulative MP reached 239.40 ± 1.27 NL/kg OM; the kinetic coefficient of MP (kCH4) and the initial MP rate (rCH4) were 0.32 ± 0.02 d−1 and 76.80 ± 1.10 NL/(kg OM·d), respectively. After hydrothermal pre-treatment, the MP of BHT (253.60 ± 1.83 NL/kg OM) was 6.3% higher than BWT. However, the highest MP was found for BE, 268.20 ± 1.37 NL/kg OM; to compare, it increased by 12.1% and 5.5% with BWT and BHT, respectively. However, the kinetic parameters of MP were highest with BHT:kCH4 0.56 ± 0.02 d−1 vs. 0.32 ± 0.02 d−1 (BWT) and 0.34 ± 0.02 d−1 (BE); rCH4 141.80 ± 0.02 NL/(kg OM·d) (BHT) vs. 76.80 ± 1.10 NL/(kg OM·d) (BWT) and 89.80 ± 0.50 NL/(kg OM·d) (BE). The effectiveness of OM removal was highest with BE, similarly to the MP with the use of an enzymatic additive. The kinetics of OM removal (rOM, kOM) were highest with BHT, similarly to the kinetics of MP (rCH4, kCH4). The highest effectiveness of OM and, consequently, its lowest final content obtained with BE means that the organics were used most efficiently, which, in turn, may result in obtaining a more stable digestive system.