Abstract
The paper presents the results of tests of wear of hardened wear-resistant steels in the presence of quartz, coal and coal-mineral abrasives of a differentiated ratios of each component and in the case without abrasives. The tests were carried out on a ring-on-ring test stand. Volume loss was the parameter used to characterize the wear level. Based on the Scanning Electron Microscopy (SEM) observations, different mechanisms of surface destruction depending on the type of abrasive were found. For the quartz abrasive, it was shown that the quartz grains cause micro-cutting, but surface cracks also appear that further transform into shallow holes. In the case of mixtures of quartz with coal, the surface was micro-scratched by quartz grains, but some of these grains were hammered into the surface, what was favoured by the presence of coal fractions. In the case of coal abrasive, traces of single cutting were observed, as well as unremoved scratches formed at the sample grinding stage. Based on the wear observation, two models of steel surface wear in the presence of coal and coal-mineral abrasives were determined.