One of the most harmful compounds are nitrogen oxides. Currently, the common industrial method of nitrogen oxides emission control is selective catalytic reduction with ammonia (NH3-SCR). Among all of the recognized measures, NH3-SCR is the most effective and reaches even up to 90% of NOx conversion. The presence of the catalyst provides the surface for the reaction to proceed and lowers the activation energy. The optimum temperature of the process is in the range of 150−450 °C and the majority of the commercial installations utilize vanadium oxide (V2O5) supported on titanium oxide (TiO2) in a form of anatase, wash coated on a honeycomb monolith or deposited on a plate-like structures. In order to improve the mechanical stability and chemical resistance, the system is usually promoted with tungsten oxide (WO3) or molybdenum oxide (MoO3). The efficiency of the commercial V2O5-WO3-TiO2 catalyst of NH3-SCR, can be gradually decreased with time of its utilization. Apart from the physical deactivation, such as high temperature sintering, attrition and loss of the active elements by volatilization, the system can suffer from chemical poisoning. All of the presented deactivating agents pass for the most severe poisons of V2O5-WO3-TiO2. In order to minimize the harmful influence of H2O, SO2, alkali metals, heavy metals and halogens, a number of methods has been developed. Some of them improve the resistance to poisons and some are focused on recovery of the catalytic system. Nevertheless, since the amount of highly contaminated fuels combusted in power plants and industry gradually increases, more effective poisoning-preventing and regeneration measures are still in high demand.