Abstract
In order to improve the hydraulic performance of the centrifugal prefabricated pumping station and improve its internal flow pattern, this paper optimizes the geometric model of the centrifugal prefabricated pumping station based on the orthogonal optimization method. Through the subjective analysis method and range analysis method, it is concluded that the primary and secondary order affecting the hydraulic performance of the prefabricated pumping station is: center distance Y, pump spacing S, inlet radius R, suspension height Z, inlet height H, and the optimal parameter combination is pump spacing 550 mm (5.5 d), The suspension height is 300 mm (3.0 d), the center distance is 100 mm (1.0 d), the inlet height is 700 mm (7.0 d), and the inlet radius is 75 mm (0.75 d). The orthogonal optimization results show that under the design condition (Qd = 33.93 m3/h), the efficiency of the centrifugal prefabricated pumping station is 64.69%, which is increased by 0.70%, compared with the initial scheme. The head is 8.76 m, which is increased by 0.10 m, compared with the initial scheme. After optimization, the recirculation vortex at the water inlet of the prefabricated pumping station is smaller than that before optimization, the flow velocity uniformity in the prefabricated barrel is improved, and the flow field is more stable. The research results of this paper can provide theoretical guidance and engineering reference value for the same type of prefabricated pumping stations.