Abstract
Typically, reinforced concrete and brick masonry construction is the most common construction system of the majority of the southern European residential building stock. However, the lightweight steel framing (LSF) construction system has been progressively assuming a relevant position in the residential sector. Since LSF is not the traditional construction system, the indoor thermal environment of these buildings has not been widely studied and discussed considering the southern European climate context. The low thermal inertia of this construction system is commonly pointed to as a possible weakness in warmer climates. The present work aims to address this research gap by evaluating and comparing the LSF and masonry construction systems in terms of the indoor thermal environment focusing on the level of thermal inertia. The considered methodology lies in a long-term experimental campaign based on the construction and monitoring of two identical experimental test cells, differing only in the construction system. The test cells are in the central region of Portugal. The monitoring period elapsed over an entire year. Dynamic simulations are also carried out with a model experimentally validated to consider a wider range of climatic conditions. It is shown that internally insulating the ground floor has an impact on the indoor thermal environment of the LSF test cell by accentuating the indoor air temperature fluctuations and magnitude of the extreme peak values. However, the results also reveal that the faster and closer response to the outdoor conditions may be beneficial for LSF buildings during the heating season.