Abstract
The management of the global energy resources has stimulated the emergence of various agreements in favor of the environment. Among the most famous are the Conference of Parties (COP) and Route 2030, which aim to limit global warming to 1.5 °C by reducing the energy consumption and global emission levels. In order to comply with the international standards for energy consumption and pollutant emissions, the Brazilian government has been promoting the expansion of biofuels in the national energy matrix. Considering this scenario, the development of a novel internal combustion engine for the exclusive use of ethanol as a fuel, equipped with state-of-the-art technologies and employing modern design concepts, consists of an innovative and promising pathway for future Brazilian mobility, from both environmental and technological outlooks. In this sense, this work presents a method to determine the main engine dimensions as part of the initial process for a new ethanol prototype engine development. The Brazilian biofuel was selected due to its physicochemical properties, which allow the engine to achieve higher loads, and also due to its large availability as a renewable energy source in the country. Furthermore, a port water injection system was fitted to the engine in order to assist the combustion process by mitigating the knock tendency. The predicted overall engine performance was obtained by carrying out a GT-PowerTM 1D-CFD simulation, whose results pointed to a maximum torque of 279 Nm from 2000 to 4000 rpm and an indicated peak power of 135 kW at 5500 rpm. With a maximum water-to-fuel ratio of 19.2%, the engine was able to perform its entire full load curve at the MBT condition, a fact that makes the WI approach along with the ethanol fuel a very attractive solution. As a result of the specific design and optimization of each geometric parameter for this unique ethanol engine, a maximum indicated fuel conversion efficiency of 45.3% was achieved. Moreover, the engine was capable of achieving over 40% of the indicated fuel conversion efficiency in almost its entire full load curve.