The turbulence intensity (TI) is defined as the ratio of fluctuation from the standard deviation of wind velocity to the mean value. Many studies have been performedon TI for flow dynamics and adapted various field such as aerodynamics, jets, wind turbines, wind tunnel apparatuses, heat transfer, safety estimation of construction, etc.The TI represents an important parameter for determining the intensity of velocity variation and flow quality in industrial fluid mechanics. In this paper, computational fluid dynamic (CFD) simulation of TI alteration with increasing temperature has been performed using the finite volume method. A high-temperature—maximum 300 degrees Celsius (°C)—wind tunnel test rig has been used as theapparatus, and velocity was measured by an I-type hot-wire anemometer. The velocity and TI of the core test section were operated at several degrees of inlet temperatures at anair velocity of 20 m/s. The magnitude of TI has a relationship with boundary layer development. The TI increased as temperature increased due to turbulence created by the non-uniformities.