LAPSE:2024.0946
Published Article

LAPSE:2024.0946
The Textural and Physical Characteristics of Red Radishes Based on a Puncture Test
June 7, 2024
Abstract
Texture is an important indication of the quality of food products, and the analysis of texture involves the measurement of their response when subjected to mechanical forces, such as cutting, scissoring, chewing, and compression or stretching. There is a close correlation between the texture of agri-food products and their mechanical properties. In this study, the textural characteristics of red radish roots were analyzed under different storage conditions using a penetration test. The physical parameters analyzed are the skin strength and elasticity, breaking point, ripening and softening profile, and flesh firmness. The results of the breaking point after the products’ storage at room temperature (tested after one, two, and three days, respectively) are: 184.96 N, 151.29 N, and 154.42 N, respectively; for radishes stored at a temperature of 2.8 °C, the breaking point is: 132.12 N, 109.76 N, and 141.16 N, respectively. The lowest value of firmness is recorded for the radishes tested fresh at 78.98 N, and the highest value of firmness is for the sample of specimens kept at laboratory temperature, that is, 103.96 N. The epidermal elasticity also undergoes significant changes during the experiment, starting from an epidermal elasticity of 2.14 mm (fresh sample) to a value of 4.15 mm (for the sample stored at laboratory temperature for three days). The experimental determinations indicated that the highest value of the penetration force of 184.1 N was obtained for the product stored at room temperature, and the lowest value of 109.76 N was obtained for the product stored at 2.8 °C.
Texture is an important indication of the quality of food products, and the analysis of texture involves the measurement of their response when subjected to mechanical forces, such as cutting, scissoring, chewing, and compression or stretching. There is a close correlation between the texture of agri-food products and their mechanical properties. In this study, the textural characteristics of red radish roots were analyzed under different storage conditions using a penetration test. The physical parameters analyzed are the skin strength and elasticity, breaking point, ripening and softening profile, and flesh firmness. The results of the breaking point after the products’ storage at room temperature (tested after one, two, and three days, respectively) are: 184.96 N, 151.29 N, and 154.42 N, respectively; for radishes stored at a temperature of 2.8 °C, the breaking point is: 132.12 N, 109.76 N, and 141.16 N, respectively. The lowest value of firmness is recorded for the radishes tested fresh at 78.98 N, and the highest value of firmness is for the sample of specimens kept at laboratory temperature, that is, 103.96 N. The epidermal elasticity also undergoes significant changes during the experiment, starting from an epidermal elasticity of 2.14 mm (fresh sample) to a value of 4.15 mm (for the sample stored at laboratory temperature for three days). The experimental determinations indicated that the highest value of the penetration force of 184.1 N was obtained for the product stored at room temperature, and the lowest value of 109.76 N was obtained for the product stored at 2.8 °C.
Record ID
Keywords
penetration force, puncture test, red radishes, storage conditions, texture analysis
Subject
Suggested Citation
Lupu M, Nedeff V, Panainte-Lehadus M, Mosnegutu E, Tomozei C, Chitimus D, Rusu DI. The Textural and Physical Characteristics of Red Radishes Based on a Puncture Test. (2024). LAPSE:2024.0946
Author Affiliations
Lupu M: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania
Nedeff V: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania; “Gheorghe Ionescu-Sisesti” Academy of Agricultural and Forestry Sciences of Bucharest, 011464 Bucuresti, Romania
Panainte-Lehadus M: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Mosnegutu E: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Tomozei C: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Chitimus D: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Rusu DI: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Nedeff V: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania; “Gheorghe Ionescu-Sisesti” Academy of Agricultural and Forestry Sciences of Bucharest, 011464 Bucuresti, Romania
Panainte-Lehadus M: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Mosnegutu E: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Tomozei C: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Chitimus D: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Rusu DI: Faculty of Engineering, “Vasile Alecsandri” University of Bacau, 600115 Bacau, Romania [ORCID]
Journal Name
Processes
Volume
12
Issue
2
First Page
282
Year
2024
Publication Date
2024-01-27
ISSN
2227-9717
Version Comments
Original Submission
Other Meta
PII: pr12020282, Publication Type: Journal Article
Record Map
Published Article

LAPSE:2024.0946
This Record
External Link

https://doi.org/10.3390/pr12020282
Publisher Version
Download
Meta
Record Statistics
Record Views
475
Version History
[v1] (Original Submission)
Jun 7, 2024
Verified by curator on
Jun 7, 2024
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2024.0946
Record Owner
Auto Uploader for LAPSE
Links to Related Works
