LAPSE:2023.7075
Published Article
LAPSE:2023.7075
Influence of Injection Pressure and Aluminium Oxide Nano Particle-Added Fish Oil Methyl Ester on the Performance and Emission of Compression Ignition Engine
February 24, 2023
The present experimental examination was carried out to suggest a better fuel blend with an optimised dosage level of alumina nanoparticles (Al2O3)—in a mixture of Fish Oil Methyl Ester (FOME) biodiesel and diesel—and injection pressure, wherein enhanced performance and reduced emissions were obtained via a diesel engine. The aluminium nanoparticles were added to the mixture in 5 mg/l steps through varying concentrations from 5 to 20 mg/L. The experimental results showed that engine performance quietly reduces with increased emission characteristics with the addition of raw FOME biodiesel compared to diesel. Furthermore, the addition of aluminium nanoparticles (Al2O3) improved the performance as well as the emission characteristics of the engine. Among all the test blends, the B40D60A20 blend provided a maximum brake thermal efficiency of 30.7%, which is 15.63% superior to raw FOME and 3.90% inferior to diesel fuel. The blend also showed reduced emissions, for instance, a reduction of 48.38% in CO, 17.51% in HC, 16.52% in NOx, and 20.89% in smoke compared to diesel fuel. Lastly, it was concluded that B40D60A20 at 260 bar is the optimised fuel blend, and 20 mg/l is the recommended dose level of aluminium nanoparticles (Al2O3) in the FOME−diesel mixture biodiesels in order to enhance the performance and emission parameters of a diesel engine.
Record ID
Keywords
aluminium nanoparticles, common rail direct injection, emission and performance, fish biodiesel
Subject
Suggested Citation
Akkoli KM, Kamate SC, Topannavar SN, Bhavimani AR, Banapurmath NR, Veza I, Soudagar MEM, Khan TMY, El-Shafay AS, Kalam MA, Shivashimpi MM, Gulli AM. Influence of Injection Pressure and Aluminium Oxide Nano Particle-Added Fish Oil Methyl Ester on the Performance and Emission of Compression Ignition Engine. (2023). LAPSE:2023.7075
Author Affiliations
Akkoli KM: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Kamate SC: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Topannavar SN: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Bhavimani AR: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Banapurmath NR: Department of Mechanical Engineering, B.V.B. College of Engineering and Technology, Hubli 580031, Karnataka, India [ORCID]
Veza I: Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak Darul Ridzuan, Malaysia [ORCID]
Soudagar MEM: Department of Mechanical Engineering, Faculty of Mechanical Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia [ORCID]
Khan TMY: Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia [ORCID]
El-Shafay AS: Department of Mechanical Engineering, College of Engineering, Prince Sattam bin Abdulaziz University, Alkharj 16273, Saudi Arabia [ORCID]
Kalam MA: School of Civil and Environmental Engineering, FEIT, University of Technology Sydney, Sydney, NSW 2007, Australia [ORCID]
Shivashimpi MM: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Gulli AM: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Kamate SC: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Topannavar SN: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Bhavimani AR: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Banapurmath NR: Department of Mechanical Engineering, B.V.B. College of Engineering and Technology, Hubli 580031, Karnataka, India [ORCID]
Veza I: Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar 32610, Perak Darul Ridzuan, Malaysia [ORCID]
Soudagar MEM: Department of Mechanical Engineering, Faculty of Mechanical Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia [ORCID]
Khan TMY: Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia [ORCID]
El-Shafay AS: Department of Mechanical Engineering, College of Engineering, Prince Sattam bin Abdulaziz University, Alkharj 16273, Saudi Arabia [ORCID]
Kalam MA: School of Civil and Environmental Engineering, FEIT, University of Technology Sydney, Sydney, NSW 2007, Australia [ORCID]
Shivashimpi MM: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Gulli AM: Mechanical Engineering Department, Hirasugar Institute of Technology, Nidasoshi 591236, Karnataka, India
Journal Name
Energies
Volume
15
Issue
24
First Page
9491
Year
2022
Publication Date
2022-12-14
Published Version
ISSN
1996-1073
Version Comments
Original Submission
Other Meta
PII: en15249491, Publication Type: Journal Article
Record Map
Published Article
LAPSE:2023.7075
This Record
External Link
doi:10.3390/en15249491
Publisher Version
Download
Meta
Record Statistics
Record Views
56
Version History
[v1] (Original Submission)
Feb 24, 2023
Verified by curator on
Feb 24, 2023
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2023.7075
Original Submitter
Auto Uploader for LAPSE
Links to Related Works