Abstract
Pump as turbine (PAT) is one of the micro-hydro system components. It can be used alone as a generator in remote areas without power supply, and in hydraulic networks instead of pressure-reducing valves. However, its hydraulic optimization still remains an open research problem. One of the optimization techniques is the rounding of the sharp edges at the blade periphery. Existing studies are mostly based on prototype experiments to obtain the optimization effect. In order to more intuitively analyze the influence of this structural optimization on the internal flow of PAT, this paper uses the CFD method to study the influence of the leading edge of the centrifugal pump blade and the fillet of the impeller on the turbine performance. By simulating the PAT performance at different flow rates and speeds, the internal hydraulic performance changes caused by the inverted circular blade are analyzed. Simulation results show that, under various operating conditions, the impeller inverted circle improves the efficiency of PAT to different degrees. At the speed of 1500 rpm, the efficiency is most obviously improved, which can reach 8.09%. Internal flow results show that the efficiency increases along with the decrease in impeller inlet resistance and the flow separation region in the impeller. This paper provides an effective method for studying the PAT hydraulic optimization problem.