Abstract
The injection water and formation water in the Mahu oil field have high salinity and poor compatibility, which leads to scaling and blockage in the formation or fracture propping zone during production. In this paper, a scale-inhibiting fracturing fluid system is developed which can prevent the formation of scale in the reservoir and solves the problem of scaling in the fracture propping zone at the Mahu oil field. Firstly, based on scale-inhibition rate, the performances of six commercial scale inhibitors were evaluated, including their acid and alkali resistance and temperature resistance. Then, the optimal scale inhibitors were combined with the fracturing fluid to obtain a scale-inhibiting fracturing fluid system. Its compatibility with other additives and scale-inhibition performance were evaluated. Finally, the system’s drag-reduction ability was tested through the loop friction tester. The results showed that, among the six scale inhibitors, the organic phosphonic acid scale inhibitor SC-1 has the best performance regardless of high-temperature, alkaline, and mixed scale conditions. In addition, SC-1 has good compatibility with the fracturing fluid. The scale-inhibiting fracturing fluid system can effectively prevent scaling inside the large pores in the propping zone, and a scale-inhibiting efficiency of 96.29% was obtained. The new fracture system maintained a drag-reduction efficiency of about 75%, indicating that the addition of the scale inhibitor did not cause a significant influence on the drag-reduction efficiency of the fracturing fluid.