Abstract
Intake valve parameters significantly affect the performance of the piston-type expander (PTE). To improve compressed energy utilization efficiency, intake valve parameters need to be regulated according to load. In this paper, an electro-pneumatic variable valve actuation (EPVVA) system was proposed for independent control distributing valve parameters. The trajectory planning for the intake valve was proposed to obtain good mechanical properties. Then, the intake valve duration angle was optimized, and the optimum intake valve lift curves were obtained at different rotational speeds. Results show that the energy efficiency decreased with the intake valve duration angle increasing. The output power ascended sharply with increasing intake valve duration angle, but the amplitude of power growth decreased. The output power had a maximum value at a specific intake valve duration angle. The gray relation analysis (GRA) method was applied to obtain the optimum intake duration angle based on output power and energy efficiency. Finally, the optimum intake valve trajectories were presented under different rotational speeds. Results are helpful for the future control of the piston-type expander.