LAPSE:2023.1337
Published Article

LAPSE:2023.1337
Study on the Flow Pattern and Transition Criterion of Gas-Liquid Two-Phase Flow in the Annular of Shale Gas Fractured Horizontal Wells
February 21, 2023
Abstract
Improving the accuracy of pressure prediction in the wellbore annular is of great importance for the design in oil and gas production. However, due to the existence of double-layer liquid membrane and the lack of relevant experiments, the existing correlations fail to the field application. In this study, a new model of flow pattern transition in inclined annulus pipe is proposed by using a mechanistic approach to classify the flow patterns. Firstly, a gas-liquid two-phase flow experiment in annulus pipe was carried out in a pipe with an outer diameter of 73.02 mm and an inner diameter of 121.36 mm, and then the influence of inclined angle on the transition boundary of flow pattern is discussed. Finally, a hydrodynamic transition criterion for the flow pattern model of inclined annulus pipe is established and verified in detail. The experimental results show that bubble flow, slug flow, churn flow and annular flow were observed under different inclination angles, and the results indicate that the slug flow will be shifted to the larger gas-liquid superficial flow rate region with the smaller inclination angle, and the annular flow will appear in the higher gas superficial flow rate region. Compared to the performance of the existing correlations (Kelessidis and Zhang) and the present model using the experimental data, the accuracy of the new model reached 83%, significantly higher than the other two models, and the new correlation was better in predicting the transition from slug flow to churn flow and churn flow to annular flow.
Improving the accuracy of pressure prediction in the wellbore annular is of great importance for the design in oil and gas production. However, due to the existence of double-layer liquid membrane and the lack of relevant experiments, the existing correlations fail to the field application. In this study, a new model of flow pattern transition in inclined annulus pipe is proposed by using a mechanistic approach to classify the flow patterns. Firstly, a gas-liquid two-phase flow experiment in annulus pipe was carried out in a pipe with an outer diameter of 73.02 mm and an inner diameter of 121.36 mm, and then the influence of inclined angle on the transition boundary of flow pattern is discussed. Finally, a hydrodynamic transition criterion for the flow pattern model of inclined annulus pipe is established and verified in detail. The experimental results show that bubble flow, slug flow, churn flow and annular flow were observed under different inclination angles, and the results indicate that the slug flow will be shifted to the larger gas-liquid superficial flow rate region with the smaller inclination angle, and the annular flow will appear in the higher gas superficial flow rate region. Compared to the performance of the existing correlations (Kelessidis and Zhang) and the present model using the experimental data, the accuracy of the new model reached 83%, significantly higher than the other two models, and the new correlation was better in predicting the transition from slug flow to churn flow and churn flow to annular flow.
Record ID
Keywords
annulus pipe, flow pattern transition, gas-liquid two-phase flow, slug flow
Subject
Suggested Citation
Lei Y, Wu Z, Wang W, Wu J, Ma B. Study on the Flow Pattern and Transition Criterion of Gas-Liquid Two-Phase Flow in the Annular of Shale Gas Fractured Horizontal Wells. (2023). LAPSE:2023.1337
Author Affiliations
Lei Y: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Wu Z: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Wang W: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China; College of Petroleum Engineering, Yangtze University, Wuhan 430100, China
Wu J: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Ma B: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Wu Z: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Wang W: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China; College of Petroleum Engineering, Yangtze University, Wuhan 430100, China
Wu J: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Ma B: Gas-Lift Technology Center of Tuha—CNPC, Shanshan, Turpan 838200, China
Journal Name
Processes
Volume
10
Issue
12
First Page
2630
Year
2022
Publication Date
2022-12-07
ISSN
2227-9717
Version Comments
Original Submission
Other Meta
PII: pr10122630, Publication Type: Journal Article
Record Map
Published Article

LAPSE:2023.1337
This Record
External Link

https://doi.org/10.3390/pr10122630
Publisher Version
Download
Meta
Record Statistics
Record Views
347
Version History
[v1] (Original Submission)
Feb 21, 2023
Verified by curator on
Feb 21, 2023
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2023.1337
Record Owner
Auto Uploader for LAPSE
Links to Related Works
[0.61 s]
