Abstract
Rainfall infiltration is one of the main triggers of inner dump slope failure in the process of mining coal. Changes in water content throughout the process of rainfall infiltration have rarely been studied. The reductions in soil strength due to water migration have seldomly been considered in the existing analytical solution of the safety factor (F.S) for unsaturated inner dump slopes in an open-pit mine. In this work, a new mechanical model was developed by improving the conventional analytical solutions of F.S for unsaturated inner dump slopes to accommodate water-induced degradation in the mechanical strength of waste material. Parameter analysis was carried out via a case study of the Shengli #1 open-pit coalmine. The results showed that the wetting front depth increased with increasing rainfall time, and the increasing rate was constant during the non-compressive infiltration stage, while it decreased gradually in the compressive infiltration stage. The F.S of the transition layer decreased at first and then increased with increasing infiltration depth. By considering the water migration in the inner dump slope, the calculation result of F.S by the analytical solution in the paper can more precisely represent the in situ conditions. It was larger than that of the saturated strength, but smaller than that of the natural strength. The position of the minimum F.S did not alter in the wetting front, but was close to the position of the wetting front. The depth of the potential slip surface can be calculated by the converse solution of the analytical equation when F.S = 1 for rainfall infiltration, and the most dangerous slope surface can be determined. The depth (hmin) of the potential slip surface increases with increasing wetting front (hf) by a linear function, and increases with increasing depth ratios of the saturation layer (λ). The depth ratio (i) of the minimum F.S increases with increasing λ by an exponential function. The improved analytical solution can be used to evaluate the potential sliding surface under rainfall conditions, which is helpful for evaluating slope stability and analyzing dangerous surfaces under rainfall conditions and providing guidance for reinforcement schemes.