Abstract
For the purpose of studying the dynamic and inner flow features of an open inlet channel axial flow pump unit, in the present study, numerical calculations using the SST k-ω turbulence model are applied to an open inlet channel axial flow pumping unit based on the NS equation, and experimental validation is then performed. The experimental output indicates that the designed working conditions are Q = 350 L/s, head H = 5.065 m, efficiency η = 79.56%, and the maximum operating head is H = 9.027 m, which is about 1.78 times that of the design head; further, the pump device can operate in a wide range of working conditions. In addition, the design working conditions are within the range of high-efficiency operating conditions. The calculated values and the experimental comparison are all within a 5.0% margin of error; further, the numerical calculations are reliable. The hydraulic loss of the inlet channel under the design condition Q = 350 L/s is 0.0676 m, which satisfies the relationship of the quadratic function. The uniformity of the impeller inlet velocity is 80.675%, and the weighted average angle of the velocity is 79.223°. The hydraulic loss of the outlet channel under the design condition Q = 350 L/s is 0.3183 m, and the hydraulic loss curve is a parabola with an upward opening. The flow state of the pump device is sensitive to changes in the working conditions; additionally, the flow state is optimal under the design working conditions. In this study, the energy and inner flow features of the open inlet axial flow pumping units are revealed, and the research outcomes can be used as a reference for the design and operation of similar pumping units.