Thermochemical process of biomass is being considered as a latest technique for the restoration of energy source and biochemical products. In this study, the influence of the different heating rates on pyrolysis behaviors and kinetic of jute stick were investigated to justify the waste jute stick biomass as a potential source of bioenergy. Pyrolysis experiments were carried out at four several heating rates of 10, 20, 30 and 40 °C/min, by utilizing the thermogravimetric analyzer (TG-DTA) and a fixed-bed pyrolysis reactor. Two different kinetic methods, Kissinger−Akahira−Sunose (KAS) and Ozawa−Flynn−Wall (OFW) were used to determine the distinct kinetic parameters. The experimental results showed that, the heating rates influenced significantly on the position of TG curve and maximum Tm peaks and highest decomposition rate of the jute stick biomass. Both the highest point of TG and the lowest point of Derivative thermogravimetry (DTG) curves were shifted towards the maximum temperature. However, the heating rates also influenced the products of pyrolysis yield, including bio-char, bio-oil and the non-condensable gases. The average values of activation energy were found to be 139.21 and 135.99 kJ/mol based on FWO and KAS models, respectively.