LAPSE:2019.1154v1
Published Article
LAPSE:2019.1154v1
Adsorption Process and Properties Analyses of a Pure Magadiite and a Modified Magadiite on Rhodamine-B from an Aqueous Solution
November 24, 2019
The result of an adsorption experiment indicated that the pure magadiite (MAG) and the modified MAG via cetyltrimethylammonium-bromide (CTAB-MAG) possessed pronounced affinity to the Rhodamine-B (Rh-B) dye molecules. CTAB-MAG was synthesized with an ion-exchange method between MAG and cetyltrimethylammonium-bromide (CTAB) in an aqueous solution. The adsorption capacities of CTAB-MAG and MAG on Rh-B were 67.19 mg/g and 48.13 mg/g, respectively; while the pH and the time were 7 and 60 min, respectively; however, the initial concentration of Rh-B was 100 mg/L, and adsorbent dosage was 1 g/L. Whereas, the adsorption capacity of CTAB-MAG was increased by 40% over MAG which indicated that CTAB-MAG can be used as an efficient low-cost adsorbent. Adsorption kinetics were consistent with the pseudo-second-order kinetic equation; the adsorption processes were dominated by film diffusion process which belonged to monomolecular layer adsorption.
Record ID
Keywords
adsorption process, CTAB-Magadiite, magadiite, rhodamine-B
Subject
Suggested Citation
Ge M, Xi Z, Zhu C, Liang G, Yang Y, Hu G, Jamal L, S.M. JA. Adsorption Process and Properties Analyses of a Pure Magadiite and a Modified Magadiite on Rhodamine-B from an Aqueous Solution. (2019). LAPSE:2019.1154v1
Author Affiliations
Ge M: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064 [ORCID]
Xi Z: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064
Zhu C: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064
Liang G: Key Laboratory of Polymeric Composite & Functional Materials of Ministry of Education, Sun Yat-Sen University, Guangzhou 510275, China [ORCID]
Yang Y: School of Material Science and Engineering, Guizhou Minzu University, Guiyang 550000, China
Hu G: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064
Jamal L: Department of Robotics & Mechatronics Engineering, University of Dhaka, Dhaka 1000, Bangladesh [ORCID]
S.M. JA: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064 [ORCID]
[Login] to see author email addresses.
Xi Z: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064
Zhu C: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064
Liang G: Key Laboratory of Polymeric Composite & Functional Materials of Ministry of Education, Sun Yat-Sen University, Guangzhou 510275, China [ORCID]
Yang Y: School of Material Science and Engineering, Guizhou Minzu University, Guiyang 550000, China
Hu G: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064
Jamal L: Department of Robotics & Mechatronics Engineering, University of Dhaka, Dhaka 1000, Bangladesh [ORCID]
S.M. JA: Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 51064 [ORCID]
[Login] to see author email addresses.
Journal Name
Processes
Volume
7
Issue
9
Article Number
E565
Year
2019
Publication Date
2019-08-25
Published Version
ISSN
2227-9717
Version Comments
Original Submission
Other Meta
PII: pr7090565, Publication Type: Journal Article
Record Map
Published Article
LAPSE:2019.1154v1
This Record
External Link
doi:10.3390/pr7090565
Publisher Version
Download
Meta
Record Statistics
Record Views
410
Version History
[v1] (Original Submission)
Nov 24, 2019
Verified by curator on
Nov 24, 2019
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2019.1154v1
Original Submitter
Calvin Tsay
Links to Related Works