Abstract
The present numerical investigation is focused on analyzing the characteristics of steady laminar mixed convection flow in a lid-driven square cavity, specifically considering the utilization of Al2O3−water nanofluid. The Al2O3−water nanofluid is assumed to be Newtonian and incompressible. Within the cavity, a square blockage is positioned at its center, which is subjected to isothermal heating. The blockage ratio of the square is B = 1/4, and the Grashof number is Gr = 100. The walls of the cavity are maintained at a constant temperature, Tc, while the square blockage remains at a constant temperature, Th. The primary objective of this study is to investigate the flow and heat transfer mechanisms, as well as the entropy generation within the cavity. This investigation is conducted for a range of Richardson numbers (0.01 ≤ Ri ≤ 100) and volume fractions of the nanofluid (0 ≤ ϕ ≤ 0.05). Several parameters are obtained and analyzed, including streamlines, isotherms, velocity variations on the vertical and horizontal midplanes, local Nusselt number variations on the surfaces of the square blockage, the average Nusselt number on the square blockage, and the total dimensionless entropy generation of the system. The results of the investigation revealed that both the average Nusselt number on the square blockage and the total dimensionless entropy generation of the system exhibit an increasing trend with an increasing volume fraction of the nanofluid and a decreasing Richardson number. Furthermore, correlations for the average Nusselt number and the total dimensionless entropy generation with the Richardson number, and the nanofluid volume fraction are derived.