LAPSE:2023.7017
Published Article

LAPSE:2023.7017
A Review of the Emulsification Method for Alternative Fuels Used in Diesel Engines
February 24, 2023
Diesel engines are one of the most popular reciprocating engines on the market today owing to their great thermal efficiency and dependability in energy conversion. Growing concerns about the depletion of fossil resources, fluctuating prices in the market, and environmental issues have prompted the search for renewable fuels with higher efficiencies compared with conventional fuels. Fuel derived from vegetable oils and animal fats has comparable characteristics to diesel fuel, but is renewable, despite being manufactured from various feedstocks. Nevertheless, the direct use of these fuels is strictly prohibited because it will result in many issues in the engine, affecting engine performance and durability, as well as emissions. To make biofuels as efficient as fossil fuels, it is essential to alter their characteristics. The use of emulsification techniques to obtain emulsified biofuels is one of the many ways to modify the fuel characteristics. Emulsification techniques allow for a decrease in viscosity and an increase in atomisation during injection. To date, emulsification techniques have been studied less thoroughly for use with vegetable oils and animal fats. This article will discuss the preparation and characterisation of emulsified biofuels made from vegetable oils and animal fats. This current paper reviewed research studies carried out on different emulsification techniques for biofuels used in diesel engines.
Record ID
Keywords
Alternative Fuels, emulsified biofuel, microemulsion, neat biofuel, surfactant
Subject
Suggested Citation
Hamid MF, Teoh YH, Idroas MY, Mohamed M, Sa’ad S, Mat SC, Abdullah MK, Le TD, How HG, Nguyen HT. A Review of the Emulsification Method for Alternative Fuels Used in Diesel Engines. (2023). LAPSE:2023.7017
Author Affiliations
Hamid MF: School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia [ORCID]
Teoh YH: School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia [ORCID]
Idroas MY: School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia
Mohamed M: Advance Material Research Cluster, Faculty of Bioengineering and Technology, Universiti Malaysia Kelantan, Jeli 17600, Kelantan, Malaysia [ORCID]
Sa’ad S: Faculty of Computer, Media and Technology Management, University College TATI, Kijal 24000, Terengganu, Malaysia
Mat SC: School of Mechanical Engineering, College of Engineering, Universiti Teknologi Mara, Cawangan Pulau Pinang, Kampus Permatang Pauh, Permatang Pauh 13500, Pulau Pinang, Malaysia [ORCID]
Abdullah MK: School of Material and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia
Le TD: Faculty of Mechanical Engineering, Industrial University of Ho Chi Minh City, 12 Nguyen Van Bao Street, Ward 4, Go Vap District, Ho Chi Minh City 700000, Vietnam
How HG: Department of Engineering, School of Engineering, Computing and Built Environment, UOW Malaysia KDU Penang University College, 32 Jalan Anson, George Town 10400, Penang, Malaysia
Nguyen HT: Faculty of Engineering and Technology (FET), An Phu Dong Campus 2, Nguyen Tat Thanh University (NTTU), 1165 National Route 1A, An Phu Dong Ward, District 12, Ho Chi Minh City 729800, Vietnam
Teoh YH: School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia [ORCID]
Idroas MY: School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia
Mohamed M: Advance Material Research Cluster, Faculty of Bioengineering and Technology, Universiti Malaysia Kelantan, Jeli 17600, Kelantan, Malaysia [ORCID]
Sa’ad S: Faculty of Computer, Media and Technology Management, University College TATI, Kijal 24000, Terengganu, Malaysia
Mat SC: School of Mechanical Engineering, College of Engineering, Universiti Teknologi Mara, Cawangan Pulau Pinang, Kampus Permatang Pauh, Permatang Pauh 13500, Pulau Pinang, Malaysia [ORCID]
Abdullah MK: School of Material and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, Nibong Tebal 14300, Pulau Pinang, Malaysia
Le TD: Faculty of Mechanical Engineering, Industrial University of Ho Chi Minh City, 12 Nguyen Van Bao Street, Ward 4, Go Vap District, Ho Chi Minh City 700000, Vietnam
How HG: Department of Engineering, School of Engineering, Computing and Built Environment, UOW Malaysia KDU Penang University College, 32 Jalan Anson, George Town 10400, Penang, Malaysia
Nguyen HT: Faculty of Engineering and Technology (FET), An Phu Dong Campus 2, Nguyen Tat Thanh University (NTTU), 1165 National Route 1A, An Phu Dong Ward, District 12, Ho Chi Minh City 729800, Vietnam
Journal Name
Energies
Volume
15
Issue
24
First Page
9429
Year
2022
Publication Date
2022-12-13
ISSN
1996-1073
Version Comments
Original Submission
Other Meta
PII: en15249429, Publication Type: Review
Record Map
Published Article

LAPSE:2023.7017
This Record
External Link

https://doi.org/10.3390/en15249429
Publisher Version
Download
Meta
Record Statistics
Record Views
153
Version History
[v1] (Original Submission)
Feb 24, 2023
Verified by curator on
Feb 24, 2023
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2023.7017
Record Owner
Auto Uploader for LAPSE
Links to Related Works