LAPSE:2023.1820
Published Article

LAPSE:2023.1820
Assessment of Cadmium and Copper Adsorption by Two Agricultural Soils from Romania and Tunisia: Risk of Water Resource Pollution
February 21, 2023
Abstract
Using treated wastewater for irrigation is a good solution for conserving water, but it is also in part responsible for groundwater and water surface pollution by heavy metals, especially copper and cadmium. The soil can be a barrier to retaining these pollutants and protecting the water resource. This study presents an assessment of the adsorption of copper and cadmium by two agricultural soils from Tunisia and Romania to evaluate the risk of water pollution. At first, the two soils were characterized with a scanning electron microscope and different physico-chemical analyses. Before adsorption, the elemental analysis performed with an SEM showed a very low amount of cadmium and copper in both soils (0.01%). The Tunisian soil was considered clayey soil, and the Romanian soil was sandy clayey soil. All experimental kinetics and isotherms were well correlated (R2 > 0.9) with the pseudo-first-order kinetic model and the modified and extended Redlich−Peterson binary adsorption model. For an initial concentration of both pollutants of 0.1 mmol·L−1, the amounts retained and the adsorption percentage of copper and cadmium by the two soils indicate that the Romanian soil (qCu = 0.87 μmol·g−1; % Cu = 98%; qCd = 0.88 μmol·L−1; % Cd = 99%) retained both pollutants better than the Tunisian soil (qCu = 0.65 μmol·g−1, %Cu = 83%; qCd = 0.73 μmol·g−1; = 93%). Copper presents the greatest risk of water resource pollution, especially in Tunisia. The SEM confirmed the soil adsorption of Cu and Cd and estimated that the retention mechanisms of these two heavy metals are mainly related to the amount of phosphorus, chloride, sulfur and carbon by complexation and precipitation reactions.
Using treated wastewater for irrigation is a good solution for conserving water, but it is also in part responsible for groundwater and water surface pollution by heavy metals, especially copper and cadmium. The soil can be a barrier to retaining these pollutants and protecting the water resource. This study presents an assessment of the adsorption of copper and cadmium by two agricultural soils from Tunisia and Romania to evaluate the risk of water pollution. At first, the two soils were characterized with a scanning electron microscope and different physico-chemical analyses. Before adsorption, the elemental analysis performed with an SEM showed a very low amount of cadmium and copper in both soils (0.01%). The Tunisian soil was considered clayey soil, and the Romanian soil was sandy clayey soil. All experimental kinetics and isotherms were well correlated (R2 > 0.9) with the pseudo-first-order kinetic model and the modified and extended Redlich−Peterson binary adsorption model. For an initial concentration of both pollutants of 0.1 mmol·L−1, the amounts retained and the adsorption percentage of copper and cadmium by the two soils indicate that the Romanian soil (qCu = 0.87 μmol·g−1; % Cu = 98%; qCd = 0.88 μmol·L−1; % Cd = 99%) retained both pollutants better than the Tunisian soil (qCu = 0.65 μmol·g−1, %Cu = 83%; qCd = 0.73 μmol·g−1; = 93%). Copper presents the greatest risk of water resource pollution, especially in Tunisia. The SEM confirmed the soil adsorption of Cu and Cd and estimated that the retention mechanisms of these two heavy metals are mainly related to the amount of phosphorus, chloride, sulfur and carbon by complexation and precipitation reactions.
Record ID
Keywords
Adsorption, cadmium, copper, scanning electron microscope, soil, water resource pollution
Suggested Citation
Abdelwaheb M, Nedeff V, Dridi-Dhaouadi S, Moșneguțu E, Barsan N, Chițimus AD. Assessment of Cadmium and Copper Adsorption by Two Agricultural Soils from Romania and Tunisia: Risk of Water Resource Pollution. (2023). LAPSE:2023.1820
Author Affiliations
Abdelwaheb M: Research Laboratory of Environmental Chemistry and Clean Processes (LR21ES04), Faculty of Sciences of Monastir, University of Monastir, Monastir 5000, Tunisia; Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vas
Nedeff V: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania; The Academy of Agricultural and Forestry Sciences “Gheorghe Ionescu-Şişeşti
Dridi-Dhaouadi S: Research Laboratory of Environmental Chemistry and Clean Processes (LR21ES04), Faculty of Sciences of Monastir, University of Monastir, Monastir 5000, Tunisia
Moșneguțu E: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania [ORCID]
Barsan N: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania [ORCID]
Chițimus AD: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania [ORCID]
Nedeff V: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania; The Academy of Agricultural and Forestry Sciences “Gheorghe Ionescu-Şişeşti
Dridi-Dhaouadi S: Research Laboratory of Environmental Chemistry and Clean Processes (LR21ES04), Faculty of Sciences of Monastir, University of Monastir, Monastir 5000, Tunisia
Moșneguțu E: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania [ORCID]
Barsan N: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania [ORCID]
Chițimus AD: Department of Environmental Engineering and Mechanical Engineering, Faculty of Engineering, Vasile Alecsandri University of Bacau, 157 Calea Marasesti, 600115 Bacau, Romania [ORCID]
Journal Name
Processes
Volume
10
Issue
9
First Page
1802
Year
2022
Publication Date
2022-09-07
ISSN
2227-9717
Version Comments
Original Submission
Other Meta
PII: pr10091802, Publication Type: Journal Article
Record Map
Published Article

LAPSE:2023.1820
This Record
External Link

https://doi.org/10.3390/pr10091802
Publisher Version
Download
Meta
Record Statistics
Record Views
576
Version History
[v1] (Original Submission)
Feb 21, 2023
Verified by curator on
Feb 21, 2023
This Version Number
v1
Citations
Most Recent
This Version
URL Here
https://psecommunity.org/LAPSE:2023.1820
Record Owner
Auto Uploader for LAPSE
Links to Related Works
